From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 20/42] arm/translate-a64: add FP16 FR[ECP/SQRT]S to simd_three_reg_same_fp16
Date: Thu, 1 Mar 2018 11:23:41 +0000 [thread overview]
Message-ID: <20180301112403.12487-21-peter.maydell@linaro.org> (raw)
In-Reply-To: <20180301112403.12487-1-peter.maydell@linaro.org>
From: Alex Bennée <alex.bennee@linaro.org>
As some of the constants here will also be needed
elsewhere (specifically for the upcoming SVE support) we move them out
to softfloat.h.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180227143852.11175-13-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
include/fpu/softfloat.h | 18 +++++++++++++-----
target/arm/helper-a64.h | 2 ++
target/arm/helper-a64.c | 34 ++++++++++++++++++++++++++++++++++
target/arm/translate-a64.c | 6 ++++++
4 files changed, 55 insertions(+), 5 deletions(-)
diff --git a/include/fpu/softfloat.h b/include/fpu/softfloat.h
index 9b7b5e34e2..27876e711c 100644
--- a/include/fpu/softfloat.h
+++ b/include/fpu/softfloat.h
@@ -306,8 +306,11 @@ static inline float16 float16_set_sign(float16 a, int sign)
}
#define float16_zero make_float16(0)
-#define float16_one make_float16(0x3c00)
#define float16_half make_float16(0x3800)
+#define float16_one make_float16(0x3c00)
+#define float16_one_point_five make_float16(0x3e00)
+#define float16_two make_float16(0x4000)
+#define float16_three make_float16(0x4200)
#define float16_infinity make_float16(0x7c00)
/*----------------------------------------------------------------------------
@@ -415,11 +418,13 @@ static inline float32 float32_set_sign(float32 a, int sign)
}
#define float32_zero make_float32(0)
-#define float32_one make_float32(0x3f800000)
#define float32_half make_float32(0x3f000000)
+#define float32_one make_float32(0x3f800000)
+#define float32_one_point_five make_float32(0x3fc00000)
+#define float32_two make_float32(0x40000000)
+#define float32_three make_float32(0x40400000)
#define float32_infinity make_float32(0x7f800000)
-
/*----------------------------------------------------------------------------
| The pattern for a default generated single-precision NaN.
*----------------------------------------------------------------------------*/
@@ -526,9 +531,12 @@ static inline float64 float64_set_sign(float64 a, int sign)
}
#define float64_zero make_float64(0)
-#define float64_one make_float64(0x3ff0000000000000LL)
-#define float64_ln2 make_float64(0x3fe62e42fefa39efLL)
#define float64_half make_float64(0x3fe0000000000000LL)
+#define float64_one make_float64(0x3ff0000000000000LL)
+#define float64_one_point_five make_float64(0x3FF8000000000000ULL)
+#define float64_two make_float64(0x4000000000000000ULL)
+#define float64_three make_float64(0x4008000000000000ULL)
+#define float64_ln2 make_float64(0x3fe62e42fefa39efLL)
#define float64_infinity make_float64(0x7ff0000000000000LL)
/*----------------------------------------------------------------------------
diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h
index 9c1a95594c..79012eee9d 100644
--- a/target/arm/helper-a64.h
+++ b/target/arm/helper-a64.h
@@ -29,8 +29,10 @@ DEF_HELPER_FLAGS_3(vfp_mulxd, TCG_CALL_NO_RWG, f64, f64, f64, ptr)
DEF_HELPER_FLAGS_3(neon_ceq_f64, TCG_CALL_NO_RWG, i64, i64, i64, ptr)
DEF_HELPER_FLAGS_3(neon_cge_f64, TCG_CALL_NO_RWG, i64, i64, i64, ptr)
DEF_HELPER_FLAGS_3(neon_cgt_f64, TCG_CALL_NO_RWG, i64, i64, i64, ptr)
+DEF_HELPER_FLAGS_3(recpsf_f16, TCG_CALL_NO_RWG, f16, f16, f16, ptr)
DEF_HELPER_FLAGS_3(recpsf_f32, TCG_CALL_NO_RWG, f32, f32, f32, ptr)
DEF_HELPER_FLAGS_3(recpsf_f64, TCG_CALL_NO_RWG, f64, f64, f64, ptr)
+DEF_HELPER_FLAGS_3(rsqrtsf_f16, TCG_CALL_NO_RWG, f16, f16, f16, ptr)
DEF_HELPER_FLAGS_3(rsqrtsf_f32, TCG_CALL_NO_RWG, f32, f32, f32, ptr)
DEF_HELPER_FLAGS_3(rsqrtsf_f64, TCG_CALL_NO_RWG, f64, f64, f64, ptr)
DEF_HELPER_FLAGS_1(neon_addlp_s8, TCG_CALL_NO_RWG_SE, i64, i64)
diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c
index 1ef13abd76..8fdbe034f3 100644
--- a/target/arm/helper-a64.c
+++ b/target/arm/helper-a64.c
@@ -192,6 +192,10 @@ uint64_t HELPER(neon_cgt_f64)(float64 a, float64 b, void *fpstp)
* versions, these do a fully fused multiply-add or
* multiply-add-and-halve.
*/
+#define float16_two make_float16(0x4000)
+#define float16_three make_float16(0x4200)
+#define float16_one_point_five make_float16(0x3e00)
+
#define float32_two make_float32(0x40000000)
#define float32_three make_float32(0x40400000)
#define float32_one_point_five make_float32(0x3fc00000)
@@ -200,6 +204,21 @@ uint64_t HELPER(neon_cgt_f64)(float64 a, float64 b, void *fpstp)
#define float64_three make_float64(0x4008000000000000ULL)
#define float64_one_point_five make_float64(0x3FF8000000000000ULL)
+float16 HELPER(recpsf_f16)(float16 a, float16 b, void *fpstp)
+{
+ float_status *fpst = fpstp;
+
+ a = float16_squash_input_denormal(a, fpst);
+ b = float16_squash_input_denormal(b, fpst);
+
+ a = float16_chs(a);
+ if ((float16_is_infinity(a) && float16_is_zero(b)) ||
+ (float16_is_infinity(b) && float16_is_zero(a))) {
+ return float16_two;
+ }
+ return float16_muladd(a, b, float16_two, 0, fpst);
+}
+
float32 HELPER(recpsf_f32)(float32 a, float32 b, void *fpstp)
{
float_status *fpst = fpstp;
@@ -230,6 +249,21 @@ float64 HELPER(recpsf_f64)(float64 a, float64 b, void *fpstp)
return float64_muladd(a, b, float64_two, 0, fpst);
}
+float16 HELPER(rsqrtsf_f16)(float16 a, float16 b, void *fpstp)
+{
+ float_status *fpst = fpstp;
+
+ a = float16_squash_input_denormal(a, fpst);
+ b = float16_squash_input_denormal(b, fpst);
+
+ a = float16_chs(a);
+ if ((float16_is_infinity(a) && float16_is_zero(b)) ||
+ (float16_is_infinity(b) && float16_is_zero(a))) {
+ return float16_one_point_five;
+ }
+ return float16_muladd(a, b, float16_three, float_muladd_halve_result, fpst);
+}
+
float32 HELPER(rsqrtsf_f32)(float32 a, float32 b, void *fpstp)
{
float_status *fpst = fpstp;
diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index 0e2d298687..217e73ef58 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -10303,6 +10303,9 @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn)
case 0x6: /* FMAX */
gen_helper_advsimd_maxh(tcg_res, tcg_op1, tcg_op2, fpst);
break;
+ case 0x7: /* FRECPS */
+ gen_helper_recpsf_f16(tcg_res, tcg_op1, tcg_op2, fpst);
+ break;
case 0x8: /* FMINNM */
gen_helper_advsimd_minnumh(tcg_res, tcg_op1, tcg_op2, fpst);
break;
@@ -10319,6 +10322,9 @@ static void disas_simd_three_reg_same_fp16(DisasContext *s, uint32_t insn)
case 0xe: /* FMIN */
gen_helper_advsimd_minh(tcg_res, tcg_op1, tcg_op2, fpst);
break;
+ case 0xf: /* FRSQRTS */
+ gen_helper_rsqrtsf_f16(tcg_res, tcg_op1, tcg_op2, fpst);
+ break;
case 0x13: /* FMUL */
gen_helper_advsimd_mulh(tcg_res, tcg_op1, tcg_op2, fpst);
break;
--
2.16.2
next prev parent reply other threads:[~2018-03-01 11:24 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-01 11:23 [Qemu-devel] [PULL 00/42] target-arm queue Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 01/42] hw: register: Run post_write hook on reset Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 02/42] xilinx_spips: Enable only two slaves when reading/writing with stripe Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 03/42] xilinx_spips: Use 8 dummy cycles with the QIOR/QIOR4 commands Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 04/42] i2c: Fix some brace style issues Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 05/42] i2c: Move the bus class to i2c.h Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 06/42] hw/i2c-ddc: Do not fail writes Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 07/42] hw/sii9022: Add support for Silicon Image SII9022 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 08/42] arm/vexpress: Add proper display connector emulation Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 09/42] include/exec/helper-head.h: support f16 in helper calls Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 10/42] target/arm/cpu64: introduce ARM_V8_FP16 feature bit Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 11/42] target/arm/cpu.h: update comment for half-precision values Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 12/42] target/arm/cpu.h: add additional float_status flags Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 13/42] target/arm/helper: pass explicit fpst to set_rmode Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 14/42] arm/translate-a64: implement half-precision F(MIN|MAX)(V|NMV) Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 15/42] arm/translate-a64: handle_3same_64 comment fix Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 16/42] arm/translate-a64: initial decode for simd_three_reg_same_fp16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 17/42] arm/translate-a64: add FP16 FADD/FABD/FSUB/FMUL/FDIV to simd_three_reg_same_fp16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 18/42] arm/translate-a64: add FP16 F[A]C[EQ/GE/GT] " Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 19/42] arm/translate-a64: add FP16 FMULA/X/S " Peter Maydell
2018-03-01 11:23 ` Peter Maydell [this message]
2018-03-01 11:23 ` [Qemu-devel] [PULL 21/42] arm/translate-a64: add FP16 pairwise ops simd_three_reg_same_fp16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 22/42] arm/translate-a64: add FP16 FMULX/MLS/FMLA to simd_indexed Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 23/42] arm/translate-a64: add FP16 x2 ops for simd_indexed Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 24/42] arm/translate-a64: initial decode for simd_two_reg_misc_fp16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 25/42] arm/translate-a64: add FP16 FPRINTx to simd_two_reg_misc_fp16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 26/42] arm/translate-a64: add FCVTxx " Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 27/42] arm/translate-a64: add FP16 FCMxx (zero) " Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 28/42] arm/translate-a64: add FP16 SCVTF/UCVFT " Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 29/42] arm/translate-a64: add FP16 FNEG/FABS " Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 30/42] arm/helper.c: re-factor recpe and add recepe_f16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 31/42] arm/translate-a64: add FP16 FRECPE Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 32/42] arm/translate-a64: add FP16 FRCPX to simd_two_reg_misc_fp16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 33/42] arm/translate-a64: add FP16 FSQRT " Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 34/42] arm/helper.c: re-factor rsqrte and add rsqrte_f16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 35/42] arm/translate-a64: add FP16 FRSQRTE to simd_two_reg_misc_fp16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 36/42] arm/translate-a64: add FP16 FMOV to simd_mod_imm Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 37/42] arm/translate-a64: add all FP16 ops in simd_scalar_pairwise Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 38/42] arm/translate-a64: implement simd_scalar_three_reg_same_fp16 Peter Maydell
2018-03-01 11:24 ` [Qemu-devel] [PULL 39/42] arm/translate-a64: add all single op FP16 to handle_fp_1src_half Peter Maydell
2018-03-01 11:24 ` [Qemu-devel] [PULL 40/42] target/arm: Enable ARM_V8_FP16 feature bit for the AArch64 "any" CPU Peter Maydell
2018-03-01 11:24 ` [Qemu-devel] [PULL 41/42] linux-user: Report AArch64 FP16 support via hwcap bits Peter Maydell
2018-03-01 11:24 ` [Qemu-devel] [PULL 42/42] MAINTAINERS: Update my email address Peter Maydell
2018-03-01 13:00 ` [Qemu-devel] [PULL 00/42] target-arm queue no-reply
2018-03-01 14:45 ` Peter Maydell
2018-03-02 0:52 ` Fam Zheng
2018-03-01 13:01 ` no-reply
2018-03-01 17:08 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180301112403.12487-21-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).