From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 23/42] arm/translate-a64: add FP16 x2 ops for simd_indexed
Date: Thu, 1 Mar 2018 11:23:44 +0000 [thread overview]
Message-ID: <20180301112403.12487-24-peter.maydell@linaro.org> (raw)
In-Reply-To: <20180301112403.12487-1-peter.maydell@linaro.org>
From: Alex Bennée <alex.bennee@linaro.org>
A bunch of the vectorised bitwise operations just operate on larger
chunks at a time. We can do the same for the new half-precision
operations by introducing some TWOHALFOP helpers which work on each
half of a pair of half-precision operations at once.
Hopefully all this hoop jumping will get simpler once we have
generically vectorised helpers here.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180227143852.11175-16-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/helper-a64.h | 10 ++++++++++
target/arm/helper-a64.c | 46 +++++++++++++++++++++++++++++++++++++++++++++-
target/arm/translate-a64.c | 26 +++++++++++++++++++++-----
3 files changed, 76 insertions(+), 6 deletions(-)
diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h
index 79012eee9d..003ffa582f 100644
--- a/target/arm/helper-a64.h
+++ b/target/arm/helper-a64.h
@@ -65,3 +65,13 @@ DEF_HELPER_3(advsimd_acge_f16, i32, f16, f16, ptr)
DEF_HELPER_3(advsimd_acgt_f16, i32, f16, f16, ptr)
DEF_HELPER_3(advsimd_mulxh, f16, f16, f16, ptr)
DEF_HELPER_4(advsimd_muladdh, f16, f16, f16, f16, ptr)
+DEF_HELPER_3(advsimd_add2h, i32, i32, i32, ptr)
+DEF_HELPER_3(advsimd_sub2h, i32, i32, i32, ptr)
+DEF_HELPER_3(advsimd_mul2h, i32, i32, i32, ptr)
+DEF_HELPER_3(advsimd_div2h, i32, i32, i32, ptr)
+DEF_HELPER_3(advsimd_max2h, i32, i32, i32, ptr)
+DEF_HELPER_3(advsimd_min2h, i32, i32, i32, ptr)
+DEF_HELPER_3(advsimd_maxnum2h, i32, i32, i32, ptr)
+DEF_HELPER_3(advsimd_minnum2h, i32, i32, i32, ptr)
+DEF_HELPER_3(advsimd_mulx2h, i32, i32, i32, ptr)
+DEF_HELPER_4(advsimd_muladd2h, i32, i32, i32, i32, ptr)
diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c
index 8fdbe034f3..4d5ae96d8f 100644
--- a/target/arm/helper-a64.c
+++ b/target/arm/helper-a64.c
@@ -629,8 +629,32 @@ ADVSIMD_HALFOP(max)
ADVSIMD_HALFOP(minnum)
ADVSIMD_HALFOP(maxnum)
+#define ADVSIMD_TWOHALFOP(name) \
+uint32_t ADVSIMD_HELPER(name, 2h)(uint32_t two_a, uint32_t two_b, void *fpstp) \
+{ \
+ float16 a1, a2, b1, b2; \
+ uint32_t r1, r2; \
+ float_status *fpst = fpstp; \
+ a1 = extract32(two_a, 0, 16); \
+ a2 = extract32(two_a, 16, 16); \
+ b1 = extract32(two_b, 0, 16); \
+ b2 = extract32(two_b, 16, 16); \
+ r1 = float16_ ## name(a1, b1, fpst); \
+ r2 = float16_ ## name(a2, b2, fpst); \
+ return deposit32(r1, 16, 16, r2); \
+}
+
+ADVSIMD_TWOHALFOP(add)
+ADVSIMD_TWOHALFOP(sub)
+ADVSIMD_TWOHALFOP(mul)
+ADVSIMD_TWOHALFOP(div)
+ADVSIMD_TWOHALFOP(min)
+ADVSIMD_TWOHALFOP(max)
+ADVSIMD_TWOHALFOP(minnum)
+ADVSIMD_TWOHALFOP(maxnum)
+
/* Data processing - scalar floating-point and advanced SIMD */
-float16 HELPER(advsimd_mulxh)(float16 a, float16 b, void *fpstp)
+static float16 float16_mulx(float16 a, float16 b, void *fpstp)
{
float_status *fpst = fpstp;
@@ -646,6 +670,9 @@ float16 HELPER(advsimd_mulxh)(float16 a, float16 b, void *fpstp)
return float16_mul(a, b, fpst);
}
+ADVSIMD_HALFOP(mulx)
+ADVSIMD_TWOHALFOP(mulx)
+
/* fused multiply-accumulate */
float16 HELPER(advsimd_muladdh)(float16 a, float16 b, float16 c, void *fpstp)
{
@@ -653,6 +680,23 @@ float16 HELPER(advsimd_muladdh)(float16 a, float16 b, float16 c, void *fpstp)
return float16_muladd(a, b, c, 0, fpst);
}
+uint32_t HELPER(advsimd_muladd2h)(uint32_t two_a, uint32_t two_b,
+ uint32_t two_c, void *fpstp)
+{
+ float_status *fpst = fpstp;
+ float16 a1, a2, b1, b2, c1, c2;
+ uint32_t r1, r2;
+ a1 = extract32(two_a, 0, 16);
+ a2 = extract32(two_a, 16, 16);
+ b1 = extract32(two_b, 0, 16);
+ b2 = extract32(two_b, 16, 16);
+ c1 = extract32(two_c, 0, 16);
+ c2 = extract32(two_c, 16, 16);
+ r1 = float16_muladd(a1, b1, c1, 0, fpst);
+ r2 = float16_muladd(a2, b2, c2, 0, fpst);
+ return deposit32(r1, 16, 16, r2);
+}
+
/*
* Floating point comparisons produce an integer result. Softfloat
* routines return float_relation types which we convert to the 0/-1
diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index 6a264bc134..3487c0430f 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -11417,8 +11417,13 @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn)
* multiply-add */
tcg_gen_xori_i32(tcg_op, tcg_op, 0x80008000);
}
- gen_helper_advsimd_muladdh(tcg_res, tcg_op, tcg_idx,
- tcg_res, fpst);
+ if (is_scalar) {
+ gen_helper_advsimd_muladdh(tcg_res, tcg_op, tcg_idx,
+ tcg_res, fpst);
+ } else {
+ gen_helper_advsimd_muladd2h(tcg_res, tcg_op, tcg_idx,
+ tcg_res, fpst);
+ }
break;
case 2:
if (opcode == 0x5) {
@@ -11437,10 +11442,21 @@ static void disas_simd_indexed(DisasContext *s, uint32_t insn)
switch (size) {
case 1:
if (u) {
- gen_helper_advsimd_mulxh(tcg_res, tcg_op, tcg_idx,
- fpst);
+ if (is_scalar) {
+ gen_helper_advsimd_mulxh(tcg_res, tcg_op,
+ tcg_idx, fpst);
+ } else {
+ gen_helper_advsimd_mulx2h(tcg_res, tcg_op,
+ tcg_idx, fpst);
+ }
} else {
- g_assert_not_reached();
+ if (is_scalar) {
+ gen_helper_advsimd_mulh(tcg_res, tcg_op,
+ tcg_idx, fpst);
+ } else {
+ gen_helper_advsimd_mul2h(tcg_res, tcg_op,
+ tcg_idx, fpst);
+ }
}
break;
case 2:
--
2.16.2
next prev parent reply other threads:[~2018-03-01 11:24 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-01 11:23 [Qemu-devel] [PULL 00/42] target-arm queue Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 01/42] hw: register: Run post_write hook on reset Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 02/42] xilinx_spips: Enable only two slaves when reading/writing with stripe Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 03/42] xilinx_spips: Use 8 dummy cycles with the QIOR/QIOR4 commands Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 04/42] i2c: Fix some brace style issues Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 05/42] i2c: Move the bus class to i2c.h Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 06/42] hw/i2c-ddc: Do not fail writes Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 07/42] hw/sii9022: Add support for Silicon Image SII9022 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 08/42] arm/vexpress: Add proper display connector emulation Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 09/42] include/exec/helper-head.h: support f16 in helper calls Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 10/42] target/arm/cpu64: introduce ARM_V8_FP16 feature bit Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 11/42] target/arm/cpu.h: update comment for half-precision values Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 12/42] target/arm/cpu.h: add additional float_status flags Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 13/42] target/arm/helper: pass explicit fpst to set_rmode Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 14/42] arm/translate-a64: implement half-precision F(MIN|MAX)(V|NMV) Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 15/42] arm/translate-a64: handle_3same_64 comment fix Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 16/42] arm/translate-a64: initial decode for simd_three_reg_same_fp16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 17/42] arm/translate-a64: add FP16 FADD/FABD/FSUB/FMUL/FDIV to simd_three_reg_same_fp16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 18/42] arm/translate-a64: add FP16 F[A]C[EQ/GE/GT] " Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 19/42] arm/translate-a64: add FP16 FMULA/X/S " Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 20/42] arm/translate-a64: add FP16 FR[ECP/SQRT]S " Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 21/42] arm/translate-a64: add FP16 pairwise ops simd_three_reg_same_fp16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 22/42] arm/translate-a64: add FP16 FMULX/MLS/FMLA to simd_indexed Peter Maydell
2018-03-01 11:23 ` Peter Maydell [this message]
2018-03-01 11:23 ` [Qemu-devel] [PULL 24/42] arm/translate-a64: initial decode for simd_two_reg_misc_fp16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 25/42] arm/translate-a64: add FP16 FPRINTx to simd_two_reg_misc_fp16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 26/42] arm/translate-a64: add FCVTxx " Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 27/42] arm/translate-a64: add FP16 FCMxx (zero) " Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 28/42] arm/translate-a64: add FP16 SCVTF/UCVFT " Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 29/42] arm/translate-a64: add FP16 FNEG/FABS " Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 30/42] arm/helper.c: re-factor recpe and add recepe_f16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 31/42] arm/translate-a64: add FP16 FRECPE Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 32/42] arm/translate-a64: add FP16 FRCPX to simd_two_reg_misc_fp16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 33/42] arm/translate-a64: add FP16 FSQRT " Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 34/42] arm/helper.c: re-factor rsqrte and add rsqrte_f16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 35/42] arm/translate-a64: add FP16 FRSQRTE to simd_two_reg_misc_fp16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 36/42] arm/translate-a64: add FP16 FMOV to simd_mod_imm Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 37/42] arm/translate-a64: add all FP16 ops in simd_scalar_pairwise Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 38/42] arm/translate-a64: implement simd_scalar_three_reg_same_fp16 Peter Maydell
2018-03-01 11:24 ` [Qemu-devel] [PULL 39/42] arm/translate-a64: add all single op FP16 to handle_fp_1src_half Peter Maydell
2018-03-01 11:24 ` [Qemu-devel] [PULL 40/42] target/arm: Enable ARM_V8_FP16 feature bit for the AArch64 "any" CPU Peter Maydell
2018-03-01 11:24 ` [Qemu-devel] [PULL 41/42] linux-user: Report AArch64 FP16 support via hwcap bits Peter Maydell
2018-03-01 11:24 ` [Qemu-devel] [PULL 42/42] MAINTAINERS: Update my email address Peter Maydell
2018-03-01 13:00 ` [Qemu-devel] [PULL 00/42] target-arm queue no-reply
2018-03-01 14:45 ` Peter Maydell
2018-03-02 0:52 ` Fam Zheng
2018-03-01 13:01 ` no-reply
2018-03-01 17:08 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180301112403.12487-24-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).