From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 25/42] arm/translate-a64: add FP16 FPRINTx to simd_two_reg_misc_fp16
Date: Thu, 1 Mar 2018 11:23:46 +0000 [thread overview]
Message-ID: <20180301112403.12487-26-peter.maydell@linaro.org> (raw)
In-Reply-To: <20180301112403.12487-1-peter.maydell@linaro.org>
From: Alex Bennée <alex.bennee@linaro.org>
This adds the full range of half-precision floating point to integral
instructions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180227143852.11175-18-alex.bennee@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/helper-a64.h | 2 +
target/arm/helper-a64.c | 22 ++++++++
target/arm/translate-a64.c | 123 +++++++++++++++++++++++++++++++++++++++++++--
3 files changed, 142 insertions(+), 5 deletions(-)
diff --git a/target/arm/helper-a64.h b/target/arm/helper-a64.h
index 003ffa582f..bc8d5b105b 100644
--- a/target/arm/helper-a64.h
+++ b/target/arm/helper-a64.h
@@ -75,3 +75,5 @@ DEF_HELPER_3(advsimd_maxnum2h, i32, i32, i32, ptr)
DEF_HELPER_3(advsimd_minnum2h, i32, i32, i32, ptr)
DEF_HELPER_3(advsimd_mulx2h, i32, i32, i32, ptr)
DEF_HELPER_4(advsimd_muladd2h, i32, i32, i32, i32, ptr)
+DEF_HELPER_2(advsimd_rinth_exact, f16, f16, ptr)
+DEF_HELPER_2(advsimd_rinth, f16, f16, ptr)
diff --git a/target/arm/helper-a64.c b/target/arm/helper-a64.c
index 4d5ae96d8f..4fd28fdf48 100644
--- a/target/arm/helper-a64.c
+++ b/target/arm/helper-a64.c
@@ -745,3 +745,25 @@ uint32_t HELPER(advsimd_acgt_f16)(float16 a, float16 b, void *fpstp)
int compare = float16_compare(f0, f1, fpst);
return ADVSIMD_CMPRES(compare == float_relation_greater);
}
+
+/* round to integral */
+float16 HELPER(advsimd_rinth_exact)(float16 x, void *fp_status)
+{
+ return float16_round_to_int(x, fp_status);
+}
+
+float16 HELPER(advsimd_rinth)(float16 x, void *fp_status)
+{
+ int old_flags = get_float_exception_flags(fp_status), new_flags;
+ float16 ret;
+
+ ret = float16_round_to_int(x, fp_status);
+
+ /* Suppress any inexact exceptions the conversion produced */
+ if (!(old_flags & float_flag_inexact)) {
+ new_flags = get_float_exception_flags(fp_status);
+ set_float_exception_flags(new_flags & ~float_flag_inexact, fp_status);
+ }
+
+ return ret;
+}
diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index 9c1892c49a..3c37eb99ff 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -11180,27 +11180,140 @@ static void disas_simd_two_reg_misc(DisasContext *s, uint32_t insn)
*/
static void disas_simd_two_reg_misc_fp16(DisasContext *s, uint32_t insn)
{
- int fpop, opcode, a;
+ int fpop, opcode, a, u;
+ int rn, rd;
+ bool is_q;
+ bool is_scalar;
+ bool only_in_vector = false;
+
+ int pass;
+ TCGv_i32 tcg_rmode = NULL;
+ TCGv_ptr tcg_fpstatus = NULL;
+ bool need_rmode = false;
+ int rmode;
if (!arm_dc_feature(s, ARM_FEATURE_V8_FP16)) {
unallocated_encoding(s);
return;
}
- if (!fp_access_check(s)) {
- return;
- }
+ rd = extract32(insn, 0, 5);
+ rn = extract32(insn, 5, 5);
- opcode = extract32(insn, 12, 4);
a = extract32(insn, 23, 1);
+ u = extract32(insn, 29, 1);
+ is_scalar = extract32(insn, 28, 1);
+ is_q = extract32(insn, 30, 1);
+
+ opcode = extract32(insn, 12, 5);
fpop = deposit32(opcode, 5, 1, a);
+ fpop = deposit32(fpop, 6, 1, u);
switch (fpop) {
+ case 0x18: /* FRINTN */
+ need_rmode = true;
+ only_in_vector = true;
+ rmode = FPROUNDING_TIEEVEN;
+ break;
+ case 0x19: /* FRINTM */
+ need_rmode = true;
+ only_in_vector = true;
+ rmode = FPROUNDING_NEGINF;
+ break;
+ case 0x38: /* FRINTP */
+ need_rmode = true;
+ only_in_vector = true;
+ rmode = FPROUNDING_POSINF;
+ break;
+ case 0x39: /* FRINTZ */
+ need_rmode = true;
+ only_in_vector = true;
+ rmode = FPROUNDING_ZERO;
+ break;
+ case 0x58: /* FRINTA */
+ need_rmode = true;
+ only_in_vector = true;
+ rmode = FPROUNDING_TIEAWAY;
+ break;
+ case 0x59: /* FRINTX */
+ case 0x79: /* FRINTI */
+ only_in_vector = true;
+ /* current rounding mode */
+ break;
default:
fprintf(stderr, "%s: insn %#04x fpop %#2x\n", __func__, insn, fpop);
g_assert_not_reached();
}
+
+ /* Check additional constraints for the scalar encoding */
+ if (is_scalar) {
+ if (!is_q) {
+ unallocated_encoding(s);
+ return;
+ }
+ /* FRINTxx is only in the vector form */
+ if (only_in_vector) {
+ unallocated_encoding(s);
+ return;
+ }
+ }
+
+ if (!fp_access_check(s)) {
+ return;
+ }
+
+ if (need_rmode) {
+ tcg_fpstatus = get_fpstatus_ptr(true);
+ }
+
+ if (need_rmode) {
+ tcg_rmode = tcg_const_i32(arm_rmode_to_sf(rmode));
+ gen_helper_set_rmode(tcg_rmode, tcg_rmode, tcg_fpstatus);
+ }
+
+ if (is_scalar) {
+ /* no operations yet */
+ } else {
+ for (pass = 0; pass < (is_q ? 8 : 4); pass++) {
+ TCGv_i32 tcg_op = tcg_temp_new_i32();
+ TCGv_i32 tcg_res = tcg_temp_new_i32();
+
+ read_vec_element_i32(s, tcg_op, rn, pass, MO_16);
+
+ switch (fpop) {
+ case 0x18: /* FRINTN */
+ case 0x19: /* FRINTM */
+ case 0x38: /* FRINTP */
+ case 0x39: /* FRINTZ */
+ case 0x58: /* FRINTA */
+ case 0x79: /* FRINTI */
+ gen_helper_advsimd_rinth(tcg_res, tcg_op, tcg_fpstatus);
+ break;
+ case 0x59: /* FRINTX */
+ gen_helper_advsimd_rinth_exact(tcg_res, tcg_op, tcg_fpstatus);
+ break;
+ default:
+ g_assert_not_reached();
+ }
+
+ write_vec_element_i32(s, tcg_res, rd, pass, MO_16);
+
+ tcg_temp_free_i32(tcg_res);
+ tcg_temp_free_i32(tcg_op);
+ }
+
+ clear_vec_high(s, is_q, rd);
+ }
+
+ if (tcg_rmode) {
+ gen_helper_set_rmode(tcg_rmode, tcg_rmode, tcg_fpstatus);
+ tcg_temp_free_i32(tcg_rmode);
+ }
+
+ if (tcg_fpstatus) {
+ tcg_temp_free_ptr(tcg_fpstatus);
+ }
}
/* AdvSIMD scalar x indexed element
--
2.16.2
next prev parent reply other threads:[~2018-03-01 11:24 UTC|newest]
Thread overview: 48+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-01 11:23 [Qemu-devel] [PULL 00/42] target-arm queue Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 01/42] hw: register: Run post_write hook on reset Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 02/42] xilinx_spips: Enable only two slaves when reading/writing with stripe Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 03/42] xilinx_spips: Use 8 dummy cycles with the QIOR/QIOR4 commands Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 04/42] i2c: Fix some brace style issues Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 05/42] i2c: Move the bus class to i2c.h Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 06/42] hw/i2c-ddc: Do not fail writes Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 07/42] hw/sii9022: Add support for Silicon Image SII9022 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 08/42] arm/vexpress: Add proper display connector emulation Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 09/42] include/exec/helper-head.h: support f16 in helper calls Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 10/42] target/arm/cpu64: introduce ARM_V8_FP16 feature bit Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 11/42] target/arm/cpu.h: update comment for half-precision values Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 12/42] target/arm/cpu.h: add additional float_status flags Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 13/42] target/arm/helper: pass explicit fpst to set_rmode Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 14/42] arm/translate-a64: implement half-precision F(MIN|MAX)(V|NMV) Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 15/42] arm/translate-a64: handle_3same_64 comment fix Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 16/42] arm/translate-a64: initial decode for simd_three_reg_same_fp16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 17/42] arm/translate-a64: add FP16 FADD/FABD/FSUB/FMUL/FDIV to simd_three_reg_same_fp16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 18/42] arm/translate-a64: add FP16 F[A]C[EQ/GE/GT] " Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 19/42] arm/translate-a64: add FP16 FMULA/X/S " Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 20/42] arm/translate-a64: add FP16 FR[ECP/SQRT]S " Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 21/42] arm/translate-a64: add FP16 pairwise ops simd_three_reg_same_fp16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 22/42] arm/translate-a64: add FP16 FMULX/MLS/FMLA to simd_indexed Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 23/42] arm/translate-a64: add FP16 x2 ops for simd_indexed Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 24/42] arm/translate-a64: initial decode for simd_two_reg_misc_fp16 Peter Maydell
2018-03-01 11:23 ` Peter Maydell [this message]
2018-03-01 11:23 ` [Qemu-devel] [PULL 26/42] arm/translate-a64: add FCVTxx to simd_two_reg_misc_fp16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 27/42] arm/translate-a64: add FP16 FCMxx (zero) " Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 28/42] arm/translate-a64: add FP16 SCVTF/UCVFT " Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 29/42] arm/translate-a64: add FP16 FNEG/FABS " Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 30/42] arm/helper.c: re-factor recpe and add recepe_f16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 31/42] arm/translate-a64: add FP16 FRECPE Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 32/42] arm/translate-a64: add FP16 FRCPX to simd_two_reg_misc_fp16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 33/42] arm/translate-a64: add FP16 FSQRT " Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 34/42] arm/helper.c: re-factor rsqrte and add rsqrte_f16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 35/42] arm/translate-a64: add FP16 FRSQRTE to simd_two_reg_misc_fp16 Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 36/42] arm/translate-a64: add FP16 FMOV to simd_mod_imm Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 37/42] arm/translate-a64: add all FP16 ops in simd_scalar_pairwise Peter Maydell
2018-03-01 11:23 ` [Qemu-devel] [PULL 38/42] arm/translate-a64: implement simd_scalar_three_reg_same_fp16 Peter Maydell
2018-03-01 11:24 ` [Qemu-devel] [PULL 39/42] arm/translate-a64: add all single op FP16 to handle_fp_1src_half Peter Maydell
2018-03-01 11:24 ` [Qemu-devel] [PULL 40/42] target/arm: Enable ARM_V8_FP16 feature bit for the AArch64 "any" CPU Peter Maydell
2018-03-01 11:24 ` [Qemu-devel] [PULL 41/42] linux-user: Report AArch64 FP16 support via hwcap bits Peter Maydell
2018-03-01 11:24 ` [Qemu-devel] [PULL 42/42] MAINTAINERS: Update my email address Peter Maydell
2018-03-01 13:00 ` [Qemu-devel] [PULL 00/42] target-arm queue no-reply
2018-03-01 14:45 ` Peter Maydell
2018-03-02 0:52 ` Fam Zheng
2018-03-01 13:01 ` no-reply
2018-03-01 17:08 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180301112403.12487-26-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).