From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 17/37] vdi: Switch to .bdrv_co_block_status()
Date: Fri, 2 Mar 2018 19:54:28 +0100 [thread overview]
Message-ID: <20180302185448.6314-18-kwolf@redhat.com> (raw)
In-Reply-To: <20180302185448.6314-1-kwolf@redhat.com>
From: Eric Blake <eblake@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the vdi driver accordingly. Note that the
TODO is already covered (the block layer guarantees bounds of its
requests), and that we can remove the now-unused s->block_sectors.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/vdi.c | 33 +++++++++++++--------------------
1 file changed, 13 insertions(+), 20 deletions(-)
diff --git a/block/vdi.c b/block/vdi.c
index 32b1763cde..0780c82d82 100644
--- a/block/vdi.c
+++ b/block/vdi.c
@@ -172,8 +172,6 @@ typedef struct {
uint32_t *bmap;
/* Size of block (bytes). */
uint32_t block_size;
- /* Size of block (sectors). */
- uint32_t block_sectors;
/* First sector of block map. */
uint32_t bmap_sector;
/* VDI header (converted to host endianness). */
@@ -463,7 +461,6 @@ static int vdi_open(BlockDriverState *bs, QDict *options, int flags,
bs->total_sectors = header.disk_size / SECTOR_SIZE;
s->block_size = header.block_size;
- s->block_sectors = header.block_size / SECTOR_SIZE;
s->bmap_sector = header.offset_bmap / SECTOR_SIZE;
s->header = header;
@@ -509,33 +506,29 @@ static int vdi_reopen_prepare(BDRVReopenState *state,
return 0;
}
-static int64_t coroutine_fn vdi_co_get_block_status(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors, int *pnum, BlockDriverState **file)
+static int coroutine_fn vdi_co_block_status(BlockDriverState *bs,
+ bool want_zero,
+ int64_t offset, int64_t bytes,
+ int64_t *pnum, int64_t *map,
+ BlockDriverState **file)
{
- /* TODO: Check for too large sector_num (in bdrv_is_allocated or here). */
BDRVVdiState *s = (BDRVVdiState *)bs->opaque;
- size_t bmap_index = sector_num / s->block_sectors;
- size_t sector_in_block = sector_num % s->block_sectors;
- int n_sectors = s->block_sectors - sector_in_block;
+ size_t bmap_index = offset / s->block_size;
+ size_t index_in_block = offset % s->block_size;
uint32_t bmap_entry = le32_to_cpu(s->bmap[bmap_index]);
- uint64_t offset;
int result;
- logout("%p, %" PRId64 ", %d, %p\n", bs, sector_num, nb_sectors, pnum);
- if (n_sectors > nb_sectors) {
- n_sectors = nb_sectors;
- }
- *pnum = n_sectors;
+ logout("%p, %" PRId64 ", %" PRId64 ", %p\n", bs, offset, bytes, pnum);
+ *pnum = MIN(s->block_size - index_in_block, bytes);
result = VDI_IS_ALLOCATED(bmap_entry);
if (!result) {
return 0;
}
- offset = s->header.offset_data +
- (uint64_t)bmap_entry * s->block_size +
- sector_in_block * SECTOR_SIZE;
+ *map = s->header.offset_data + (uint64_t)bmap_entry * s->block_size +
+ index_in_block;
*file = bs->file->bs;
- return BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID | offset;
+ return BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
}
static int coroutine_fn
@@ -903,7 +896,7 @@ static BlockDriver bdrv_vdi = {
.bdrv_child_perm = bdrv_format_default_perms,
.bdrv_create = vdi_create,
.bdrv_has_zero_init = bdrv_has_zero_init_1,
- .bdrv_co_get_block_status = vdi_co_get_block_status,
+ .bdrv_co_block_status = vdi_co_block_status,
.bdrv_make_empty = vdi_make_empty,
.bdrv_co_preadv = vdi_co_preadv,
--
2.13.6
next prev parent reply other threads:[~2018-03-02 18:55 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-02 18:54 [Qemu-devel] [PULL 00/37] Block layer patches Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 01/37] block: Add .bdrv_co_block_status() callback Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 02/37] nvme: Drop pointless .bdrv_co_get_block_status() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 03/37] block: Switch passthrough drivers to .bdrv_co_block_status() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 04/37] file-posix: Switch " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 05/37] gluster: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 06/37] iscsi: Switch cluster_sectors to byte-based Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 07/37] iscsi: Switch iscsi_allocmap_update() " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 08/37] iscsi: Switch to .bdrv_co_block_status() Kevin Wolf
2018-05-08 15:37 ` Peter Maydell
2018-05-08 16:38 ` Eric Blake
2018-03-02 18:54 ` [Qemu-devel] [PULL 09/37] null: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 10/37] parallels: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 11/37] qcow: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 12/37] qcow2: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 13/37] qed: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 14/37] raw: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 15/37] sheepdog: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 16/37] vdi: Avoid bitrot of debugging code Kevin Wolf
2018-03-02 18:54 ` Kevin Wolf [this message]
2018-03-02 18:54 ` [Qemu-devel] [PULL 18/37] vmdk: Switch to .bdrv_co_block_status() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 19/37] vpc: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 20/37] vvfat: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 21/37] block: Drop unused .bdrv_co_get_block_status() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 22/37] block: fix write with zero flag set and iovector provided Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 23/37] iotest 033: add misaligned write-zeroes test via truncate Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 24/37] specs/qcow2: Fix documentation of the compressed cluster descriptor Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 25/37] docs: document how to use the l2-cache-entry-size parameter Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 26/37] aio: rename aio_context_in_iothread() to in_aio_context_home_thread() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 27/37] block: extract AIO_WAIT_WHILE() from BlockDriverState Kevin Wolf
2018-03-05 19:53 ` Eric Blake
2018-03-02 18:54 ` [Qemu-devel] [PULL 28/37] block: add BlockBackend->in_flight counter Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 29/37] block: test blk_aio_flush() with blk->root == NULL Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 30/37] Revert "IDE: Do not flush empty CDROM drives" Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 31/37] block: rename .bdrv_create() to .bdrv_co_create_opts() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 32/37] qcow2: make qcow2_co_create2() a coroutine_fn Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 33/37] qemu-img: Make resize error message more general Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 34/37] block/ssh: Pull ssh_grow_file() from ssh_create() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 35/37] block/ssh: Make ssh_grow_file() blocking Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 36/37] block/ssh: Add basic .bdrv_truncate() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 37/37] qcow2: Replace align_offset() with ROUND_UP() Kevin Wolf
2018-03-05 13:27 ` [Qemu-devel] [PULL 00/37] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180302185448.6314-18-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).