From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 08/37] iscsi: Switch to .bdrv_co_block_status()
Date: Fri, 2 Mar 2018 19:54:19 +0100 [thread overview]
Message-ID: <20180302185448.6314-9-kwolf@redhat.com> (raw)
In-Reply-To: <20180302185448.6314-1-kwolf@redhat.com>
From: Eric Blake <eblake@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Update the iscsi driver accordingly. In this case,
it is handy to teach iscsi_co_block_status() to handle a NULL map
and file parameter, even though the block layer passes non-NULL
values, because we also call the function directly. For now, there
are no optimizations done based on the want_zero flag.
We can also make the simplification of asserting that the block
layer passed in aligned values.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/iscsi.c | 69 ++++++++++++++++++++++++++++-------------------------------
1 file changed, 33 insertions(+), 36 deletions(-)
diff --git a/block/iscsi.c b/block/iscsi.c
index d2b0466775..c228ca21c8 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -653,36 +653,36 @@ out_unlock:
-static int64_t coroutine_fn iscsi_co_get_block_status(BlockDriverState *bs,
- int64_t sector_num,
- int nb_sectors, int *pnum,
- BlockDriverState **file)
+static int coroutine_fn iscsi_co_block_status(BlockDriverState *bs,
+ bool want_zero, int64_t offset,
+ int64_t bytes, int64_t *pnum,
+ int64_t *map,
+ BlockDriverState **file)
{
IscsiLun *iscsilun = bs->opaque;
struct scsi_get_lba_status *lbas = NULL;
struct scsi_lba_status_descriptor *lbasd = NULL;
struct IscsiTask iTask;
uint64_t lba;
- int64_t ret;
+ int ret;
iscsi_co_init_iscsitask(iscsilun, &iTask);
- if (!is_sector_request_lun_aligned(sector_num, nb_sectors, iscsilun)) {
- ret = -EINVAL;
- goto out;
- }
+ assert(QEMU_IS_ALIGNED(offset | bytes, iscsilun->block_size));
/* default to all sectors allocated */
- ret = BDRV_BLOCK_DATA;
- ret |= (sector_num << BDRV_SECTOR_BITS) | BDRV_BLOCK_OFFSET_VALID;
- *pnum = nb_sectors;
+ ret = BDRV_BLOCK_DATA | BDRV_BLOCK_OFFSET_VALID;
+ if (map) {
+ *map = offset;
+ }
+ *pnum = bytes;
/* LUN does not support logical block provisioning */
if (!iscsilun->lbpme) {
goto out;
}
- lba = sector_qemu2lun(sector_num, iscsilun);
+ lba = offset / iscsilun->block_size;
qemu_mutex_lock(&iscsilun->mutex);
retry:
@@ -727,12 +727,12 @@ retry:
lbasd = &lbas->descriptors[0];
- if (sector_qemu2lun(sector_num, iscsilun) != lbasd->lba) {
+ if (lba != lbasd->lba) {
ret = -EIO;
goto out_unlock;
}
- *pnum = sector_lun2qemu(lbasd->num_blocks, iscsilun);
+ *pnum = lbasd->num_blocks * iscsilun->block_size;
if (lbasd->provisioning == SCSI_PROVISIONING_TYPE_DEALLOCATED ||
lbasd->provisioning == SCSI_PROVISIONING_TYPE_ANCHORED) {
@@ -743,15 +743,13 @@ retry:
}
if (ret & BDRV_BLOCK_ZERO) {
- iscsi_allocmap_set_unallocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
- *pnum * BDRV_SECTOR_SIZE);
+ iscsi_allocmap_set_unallocated(iscsilun, offset, *pnum);
} else {
- iscsi_allocmap_set_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
- *pnum * BDRV_SECTOR_SIZE);
+ iscsi_allocmap_set_allocated(iscsilun, offset, *pnum);
}
- if (*pnum > nb_sectors) {
- *pnum = nb_sectors;
+ if (*pnum > bytes) {
+ *pnum = bytes;
}
out_unlock:
qemu_mutex_unlock(&iscsilun->mutex);
@@ -760,7 +758,7 @@ out:
if (iTask.task != NULL) {
scsi_free_scsi_task(iTask.task);
}
- if (ret > 0 && ret & BDRV_BLOCK_OFFSET_VALID) {
+ if (ret > 0 && ret & BDRV_BLOCK_OFFSET_VALID && file) {
*file = bs;
}
return ret;
@@ -800,25 +798,24 @@ static int coroutine_fn iscsi_co_readv(BlockDriverState *bs,
nb_sectors * BDRV_SECTOR_SIZE) &&
!iscsi_allocmap_is_allocated(iscsilun, sector_num * BDRV_SECTOR_SIZE,
nb_sectors * BDRV_SECTOR_SIZE)) {
- int pnum;
- BlockDriverState *file;
+ int64_t pnum;
/* check the block status from the beginning of the cluster
* containing the start sector */
- int cluster_sectors = iscsilun->cluster_size >> BDRV_SECTOR_BITS;
- int head;
- int64_t ret;
-
- assert(cluster_sectors);
- head = sector_num % cluster_sectors;
- ret = iscsi_co_get_block_status(bs, sector_num - head,
- BDRV_REQUEST_MAX_SECTORS, &pnum,
- &file);
+ int64_t head;
+ int ret;
+
+ assert(iscsilun->cluster_size);
+ head = (sector_num * BDRV_SECTOR_SIZE) % iscsilun->cluster_size;
+ ret = iscsi_co_block_status(bs, true,
+ sector_num * BDRV_SECTOR_SIZE - head,
+ BDRV_REQUEST_MAX_BYTES, &pnum, NULL, NULL);
if (ret < 0) {
return ret;
}
/* if the whole request falls into an unallocated area we can avoid
* reading and directly return zeroes instead */
- if (ret & BDRV_BLOCK_ZERO && pnum >= nb_sectors + head) {
+ if (ret & BDRV_BLOCK_ZERO &&
+ pnum >= nb_sectors * BDRV_SECTOR_SIZE + head) {
qemu_iovec_memset(iov, 0, 0x00, iov->size);
return 0;
}
@@ -2218,7 +2215,7 @@ static BlockDriver bdrv_iscsi = {
.bdrv_truncate = iscsi_truncate,
.bdrv_refresh_limits = iscsi_refresh_limits,
- .bdrv_co_get_block_status = iscsi_co_get_block_status,
+ .bdrv_co_block_status = iscsi_co_block_status,
.bdrv_co_pdiscard = iscsi_co_pdiscard,
.bdrv_co_pwrite_zeroes = iscsi_co_pwrite_zeroes,
.bdrv_co_readv = iscsi_co_readv,
@@ -2253,7 +2250,7 @@ static BlockDriver bdrv_iser = {
.bdrv_truncate = iscsi_truncate,
.bdrv_refresh_limits = iscsi_refresh_limits,
- .bdrv_co_get_block_status = iscsi_co_get_block_status,
+ .bdrv_co_block_status = iscsi_co_block_status,
.bdrv_co_pdiscard = iscsi_co_pdiscard,
.bdrv_co_pwrite_zeroes = iscsi_co_pwrite_zeroes,
.bdrv_co_readv = iscsi_co_readv,
--
2.13.6
next prev parent reply other threads:[~2018-03-02 18:55 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-02 18:54 [Qemu-devel] [PULL 00/37] Block layer patches Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 01/37] block: Add .bdrv_co_block_status() callback Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 02/37] nvme: Drop pointless .bdrv_co_get_block_status() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 03/37] block: Switch passthrough drivers to .bdrv_co_block_status() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 04/37] file-posix: Switch " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 05/37] gluster: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 06/37] iscsi: Switch cluster_sectors to byte-based Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 07/37] iscsi: Switch iscsi_allocmap_update() " Kevin Wolf
2018-03-02 18:54 ` Kevin Wolf [this message]
2018-05-08 15:37 ` [Qemu-devel] [PULL 08/37] iscsi: Switch to .bdrv_co_block_status() Peter Maydell
2018-05-08 16:38 ` Eric Blake
2018-03-02 18:54 ` [Qemu-devel] [PULL 09/37] null: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 10/37] parallels: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 11/37] qcow: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 12/37] qcow2: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 13/37] qed: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 14/37] raw: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 15/37] sheepdog: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 16/37] vdi: Avoid bitrot of debugging code Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 17/37] vdi: Switch to .bdrv_co_block_status() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 18/37] vmdk: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 19/37] vpc: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 20/37] vvfat: " Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 21/37] block: Drop unused .bdrv_co_get_block_status() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 22/37] block: fix write with zero flag set and iovector provided Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 23/37] iotest 033: add misaligned write-zeroes test via truncate Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 24/37] specs/qcow2: Fix documentation of the compressed cluster descriptor Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 25/37] docs: document how to use the l2-cache-entry-size parameter Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 26/37] aio: rename aio_context_in_iothread() to in_aio_context_home_thread() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 27/37] block: extract AIO_WAIT_WHILE() from BlockDriverState Kevin Wolf
2018-03-05 19:53 ` Eric Blake
2018-03-02 18:54 ` [Qemu-devel] [PULL 28/37] block: add BlockBackend->in_flight counter Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 29/37] block: test blk_aio_flush() with blk->root == NULL Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 30/37] Revert "IDE: Do not flush empty CDROM drives" Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 31/37] block: rename .bdrv_create() to .bdrv_co_create_opts() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 32/37] qcow2: make qcow2_co_create2() a coroutine_fn Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 33/37] qemu-img: Make resize error message more general Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 34/37] block/ssh: Pull ssh_grow_file() from ssh_create() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 35/37] block/ssh: Make ssh_grow_file() blocking Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 36/37] block/ssh: Add basic .bdrv_truncate() Kevin Wolf
2018-03-02 18:54 ` [Qemu-devel] [PULL 37/37] qcow2: Replace align_offset() with ROUND_UP() Kevin Wolf
2018-03-05 13:27 ` [Qemu-devel] [PULL 00/37] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180302185448.6314-9-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).