From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
To: Stefan Berger <stefanb@linux.vnet.ibm.com>
Cc: qemu-devel@nongnu.org, marcandre.lureau@redhat.com
Subject: Re: [Qemu-devel] [PATCH 1/5] tpm: convert tpm_crb.c to use trace-events
Date: Mon, 5 Mar 2018 09:49:38 +0000 [thread overview]
Message-ID: <20180305094937.GB3131@work-vm> (raw)
In-Reply-To: <1520200587-14681-2-git-send-email-stefanb@linux.vnet.ibm.com>
* Stefan Berger (stefanb@linux.vnet.ibm.com) wrote:
> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
> ---
> Makefile.objs | 1 +
> hw/tpm/tpm_crb.c | 17 +++++------------
> hw/tpm/trace-events | 5 +++++
> 3 files changed, 11 insertions(+), 12 deletions(-)
> create mode 100644 hw/tpm/trace-events
>
> diff --git a/Makefile.objs b/Makefile.objs
> index 5dc1348..72c3d8c 100644
> --- a/Makefile.objs
> +++ b/Makefile.objs
> @@ -162,6 +162,7 @@ trace-events-subdirs += hw/alpha
> trace-events-subdirs += hw/hppa
> trace-events-subdirs += hw/xen
> trace-events-subdirs += hw/ide
> +trace-events-subdirs += hw/tpm
> trace-events-subdirs += ui
> trace-events-subdirs += audio
> trace-events-subdirs += net
> diff --git a/hw/tpm/tpm_crb.c b/hw/tpm/tpm_crb.c
> index b5b8256..d8917cb 100644
> --- a/hw/tpm/tpm_crb.c
> +++ b/hw/tpm/tpm_crb.c
> @@ -29,6 +29,7 @@
> #include "sysemu/reset.h"
> #include "tpm_int.h"
> #include "tpm_util.h"
> +#include "trace.h"
>
> typedef struct CRBState {
> DeviceState parent_obj;
> @@ -44,14 +45,6 @@ typedef struct CRBState {
>
> #define CRB(obj) OBJECT_CHECK(CRBState, (obj), TYPE_TPM_CRB)
>
> -#define DEBUG_CRB 0
> -
> -#define DPRINTF(fmt, ...) do { \
> - if (DEBUG_CRB) { \
> - printf(fmt, ## __VA_ARGS__); \
> - } \
> - } while (0)
> -
> #define CRB_INTF_TYPE_CRB_ACTIVE 0b1
> #define CRB_INTF_VERSION_CRB 0b1
> #define CRB_INTF_CAP_LOCALITY_0_ONLY 0b0
> @@ -91,8 +84,8 @@ static uint64_t tpm_crb_mmio_read(void *opaque, hwaddr addr,
> unsigned offset = addr & 3;
> uint32_t val = *(uint32_t *)regs >> (8 * offset);
>
> - DPRINTF("CRB read 0x" TARGET_FMT_plx " len:%u val: 0x%" PRIx32 "\n",
> - addr, size, val);
> + trace_tpm_crb_mmio_read(addr, size, val);
> +
> return val;
> }
>
> @@ -100,8 +93,8 @@ static void tpm_crb_mmio_write(void *opaque, hwaddr addr,
> uint64_t val, unsigned size)
> {
> CRBState *s = CRB(opaque);
> - DPRINTF("CRB write 0x" TARGET_FMT_plx " len:%u val: 0x%" PRIx64 "\n",
> - addr, size, val);
> +
> + trace_tpm_crb_mmio_write(addr, size, val);
>
> switch (addr) {
> case A_CRB_CTRL_REQ:
> diff --git a/hw/tpm/trace-events b/hw/tpm/trace-events
> new file mode 100644
> index 0000000..336b06d
> --- /dev/null
> +++ b/hw/tpm/trace-events
> @@ -0,0 +1,5 @@
> +# See docs/devel/tracing.txt for syntax documentation.
> +
> +# hw/tpm/tpm_crb.c
> +tpm_crb_mmio_read(uint64_t addr, unsigned size, uint32_t val) "CRB read 0x" TARGET_FMT_plx " len:%u val: 0x%" PRIx32
> +tpm_crb_mmio_write(uint64_t addr, unsigned size, uint32_t val) "CRB write 0x" TARGET_FMT_plx " len:%u val: 0x%" PRIx32
Have you checked that builds OK on 32bit? I think you'll need to use
PRIx64 there since the trace makes you use the uint64_t parameter.
Dave
> --
> 2.5.5
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
next prev parent reply other threads:[~2018-03-05 9:49 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-04 21:56 [Qemu-devel] [PATCH 0/5] Convert the TPM code to use tracing Stefan Berger
2018-03-04 21:56 ` [Qemu-devel] [PATCH 1/5] tpm: convert tpm_crb.c to use trace-events Stefan Berger
2018-03-05 0:08 ` Philippe Mathieu-Daudé
2018-03-05 9:49 ` Dr. David Alan Gilbert [this message]
2018-03-05 12:05 ` Stefan Berger
2018-03-05 12:07 ` Dr. David Alan Gilbert
2018-03-04 21:56 ` [Qemu-devel] [PATCH 2/5] tpm: convert tpm_passthrough.c " Stefan Berger
2018-03-05 0:08 ` Philippe Mathieu-Daudé
2018-03-04 21:56 ` [Qemu-devel] [PATCH 3/5] tpm: convert tpm_util.c " Stefan Berger
2018-03-05 0:08 ` Philippe Mathieu-Daudé
2018-03-04 21:56 ` [Qemu-devel] [PATCH 4/5] tpm: convert tpm_emulator.c " Stefan Berger
2018-03-05 0:09 ` Philippe Mathieu-Daudé
2018-03-04 21:56 ` [Qemu-devel] [PATCH 5/5] tpm: convert tpm_tis.c " Stefan Berger
2018-03-05 9:32 ` [Qemu-devel] [PATCH 0/5] Convert the TPM code to use tracing Marc-André Lureau
2018-03-06 14:48 ` Stefan Hajnoczi
2018-03-07 12:53 ` Stefan Berger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180305094937.GB3131@work-vm \
--to=dgilbert@redhat.com \
--cc=marcandre.lureau@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=stefanb@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).