* [Qemu-devel] [PATCH v4] Fix build on ppc platform in migration/postcopy-ram.c [not found] <CGME20180222084519eucas1p19bfdda3c62fa37b881f8de2d3602f3f3@eucas1p1.samsung.com> @ 2018-02-22 8:45 ` Alexey Perevalov [not found] ` <CGME20180222084520eucas1p16aa4a165d2e1c0f5ec4da12257eda269@eucas1p1.samsung.com> 0 siblings, 1 reply; 4+ messages in thread From: Alexey Perevalov @ 2018-02-22 8:45 UTC (permalink / raw) To: qemu-devel, dgilbert Cc: Alexey Perevalov, v.kuramshin, ash.billore, f4bug, quintela, peterx, lvivier V4->V3 - common helper was introduced and sanity check for probable time jumps (comment from David) V2->V3 - use UINT32_MAX instead of 0xffffffff (comment from Philippe) - use lelative time to avoid milliseconds overflow in uint32 (comment from David) V2->V1 This is a second version: - comment from David about casting David was right, I tried to find it in standard, but it was implicitly described for me, so part of standard: 1. When a value with integer type is converted to another integer type other than _Bool, if the value can be represented by the new type, it is unchanged. 2. Otherwise, if the new type is unsigned, the value is converted by repeatedly adding or subtracting one more than the maximum value that can be represented in the new type until the value is in the range of the new type. Initial message: It was a problem with 64 atomics on ppc in migration/postcopy-ram.c reported by Philippe Mathieu-Daudé <f4bug@amsat.org>. Tested in Debian on qemu-system-ppc and in Ubuntu16.04 on i386. This commit is based on commit afd3397a8149d8b645004e459bf2002d78f5e267 Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' into staging but with all necessary commit reverted in ee86981bda9ecd40c8daf81b7307b1d2aff68174 Alexey Perevalov (1): migration: change blocktime type to uint32_t hmp.c | 4 ++-- migration/postcopy-ram.c | 52 ++++++++++++++++++++++++++++-------------------- migration/trace-events | 4 ++-- qapi/migration.json | 4 ++-- 4 files changed, 36 insertions(+), 28 deletions(-) -- 2.7.4 ^ permalink raw reply [flat|nested] 4+ messages in thread
[parent not found: <CGME20180222084520eucas1p16aa4a165d2e1c0f5ec4da12257eda269@eucas1p1.samsung.com>]
* [Qemu-devel] [PATCH v4] migration: change blocktime type to uint32_t [not found] ` <CGME20180222084520eucas1p16aa4a165d2e1c0f5ec4da12257eda269@eucas1p1.samsung.com> @ 2018-02-22 8:45 ` Alexey Perevalov 2018-03-08 12:59 ` Dr. David Alan Gilbert 0 siblings, 1 reply; 4+ messages in thread From: Alexey Perevalov @ 2018-02-22 8:45 UTC (permalink / raw) To: qemu-devel, dgilbert Cc: Alexey Perevalov, v.kuramshin, ash.billore, f4bug, quintela, peterx, lvivier Initially int64_t was used, but on PowerPC architecture, clang doesn't have atomic_*_8 function, so it produces link time error. QEMU is working with time as with 64bit value, but by fact 32 bit is enough with CLOCK_REALTIME. In this case blocktime will keep only 1200 hours time interval. Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> Acked-by: Eric Blake <eblake@redhat.com> --- hmp.c | 4 ++-- migration/postcopy-ram.c | 52 ++++++++++++++++++++++++++++-------------------- migration/trace-events | 4 ++-- qapi/migration.json | 4 ++-- 4 files changed, 36 insertions(+), 28 deletions(-) diff --git a/hmp.c b/hmp.c index be091e0..ec90043 100644 --- a/hmp.c +++ b/hmp.c @@ -267,7 +267,7 @@ void hmp_info_migrate(Monitor *mon, const QDict *qdict) } if (info->has_postcopy_blocktime) { - monitor_printf(mon, "postcopy blocktime: %" PRId64 "\n", + monitor_printf(mon, "postcopy blocktime: %u\n", info->postcopy_blocktime); } @@ -275,7 +275,7 @@ void hmp_info_migrate(Monitor *mon, const QDict *qdict) Visitor *v; char *str; v = string_output_visitor_new(false, &str); - visit_type_int64List(v, NULL, &info->postcopy_vcpu_blocktime, NULL); + visit_type_uint32List(v, NULL, &info->postcopy_vcpu_blocktime, NULL); visit_complete(v, &str); monitor_printf(mon, "postcopy vcpu blocktime: %s\n", str); g_free(str); diff --git a/migration/postcopy-ram.c b/migration/postcopy-ram.c index 05475e0..c46225c 100644 --- a/migration/postcopy-ram.c +++ b/migration/postcopy-ram.c @@ -63,16 +63,17 @@ struct PostcopyDiscardState { typedef struct PostcopyBlocktimeContext { /* time when page fault initiated per vCPU */ - int64_t *page_fault_vcpu_time; + uint32_t *page_fault_vcpu_time; /* page address per vCPU */ uintptr_t *vcpu_addr; - int64_t total_blocktime; + uint32_t total_blocktime; /* blocktime per vCPU */ - int64_t *vcpu_blocktime; + uint32_t *vcpu_blocktime; /* point in time when last page fault was initiated */ - int64_t last_begin; + uint32_t last_begin; /* number of vCPU are suspended */ int smp_cpus_down; + uint64_t start_time; /* * Handler for exit event, necessary for @@ -99,22 +100,23 @@ static void migration_exit_cb(Notifier *n, void *data) static struct PostcopyBlocktimeContext *blocktime_context_new(void) { PostcopyBlocktimeContext *ctx = g_new0(PostcopyBlocktimeContext, 1); - ctx->page_fault_vcpu_time = g_new0(int64_t, smp_cpus); + ctx->page_fault_vcpu_time = g_new0(uint32_t, smp_cpus); ctx->vcpu_addr = g_new0(uintptr_t, smp_cpus); - ctx->vcpu_blocktime = g_new0(int64_t, smp_cpus); + ctx->vcpu_blocktime = g_new0(uint32_t, smp_cpus); ctx->exit_notifier.notify = migration_exit_cb; + ctx->start_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME); qemu_add_exit_notifier(&ctx->exit_notifier); return ctx; } -static int64List *get_vcpu_blocktime_list(PostcopyBlocktimeContext *ctx) +static uint32List *get_vcpu_blocktime_list(PostcopyBlocktimeContext *ctx) { - int64List *list = NULL, *entry = NULL; + uint32List *list = NULL, *entry = NULL; int i; for (i = smp_cpus - 1; i >= 0; i--) { - entry = g_new0(int64List, 1); + entry = g_new0(uint32List, 1); entry->value = ctx->vcpu_blocktime[i]; entry->next = list; list = entry; @@ -145,7 +147,7 @@ void fill_destination_postcopy_migration_info(MigrationInfo *info) info->postcopy_vcpu_blocktime = get_vcpu_blocktime_list(bc); } -static uint64_t get_postcopy_total_blocktime(void) +static uint32_t get_postcopy_total_blocktime(void) { MigrationIncomingState *mis = migration_incoming_get_current(); PostcopyBlocktimeContext *bc = mis->blocktime_ctx; @@ -610,6 +612,13 @@ static int get_mem_fault_cpu_index(uint32_t pid) return -1; } +static uint32_t get_low_time_offset(PostcopyBlocktimeContext *dc) +{ + int64_t start_time_offset = qemu_clock_get_ms(QEMU_CLOCK_REALTIME) - + dc->start_time; + return start_time_offset < 1 ? 1 : start_time_offset & UINT32_MAX; +} + /* * This function is being called when pagefault occurs. It * tracks down vCPU blocking time. @@ -624,7 +633,7 @@ static void mark_postcopy_blocktime_begin(uintptr_t addr, uint32_t ptid, int cpu, already_received; MigrationIncomingState *mis = migration_incoming_get_current(); PostcopyBlocktimeContext *dc = mis->blocktime_ctx; - int64_t now_ms; + uint32_t low_time_offset; if (!dc || ptid == 0) { return; @@ -634,14 +643,14 @@ static void mark_postcopy_blocktime_begin(uintptr_t addr, uint32_t ptid, return; } - now_ms = qemu_clock_get_ms(QEMU_CLOCK_REALTIME); + low_time_offset = get_low_time_offset(dc); if (dc->vcpu_addr[cpu] == 0) { atomic_inc(&dc->smp_cpus_down); } - atomic_xchg__nocheck(&dc->last_begin, now_ms); - atomic_xchg__nocheck(&dc->page_fault_vcpu_time[cpu], now_ms); - atomic_xchg__nocheck(&dc->vcpu_addr[cpu], addr); + atomic_xchg(&dc->last_begin, low_time_offset); + atomic_xchg(&dc->page_fault_vcpu_time[cpu], low_time_offset); + atomic_xchg(&dc->vcpu_addr[cpu], addr); /* check it here, not at the begining of the function, * due to, check could accur early than bitmap_set in @@ -688,22 +697,20 @@ static void mark_postcopy_blocktime_end(uintptr_t addr) MigrationIncomingState *mis = migration_incoming_get_current(); PostcopyBlocktimeContext *dc = mis->blocktime_ctx; int i, affected_cpu = 0; - int64_t now_ms; bool vcpu_total_blocktime = false; - int64_t read_vcpu_time; + uint32_t read_vcpu_time, low_time_offset; if (!dc) { return; } - now_ms = qemu_clock_get_ms(QEMU_CLOCK_REALTIME); - + low_time_offset = get_low_time_offset(dc); /* lookup cpu, to clear it, * that algorithm looks straighforward, but it's not * optimal, more optimal algorithm is keeping tree or hash * where key is address value is a list of */ for (i = 0; i < smp_cpus; i++) { - uint64_t vcpu_blocktime = 0; + uint32_t vcpu_blocktime = 0; read_vcpu_time = atomic_fetch_add(&dc->page_fault_vcpu_time[i], 0); if (atomic_fetch_add(&dc->vcpu_addr[i], 0) != addr || @@ -711,7 +718,7 @@ static void mark_postcopy_blocktime_end(uintptr_t addr) continue; } atomic_xchg__nocheck(&dc->vcpu_addr[i], 0); - vcpu_blocktime = now_ms - read_vcpu_time; + vcpu_blocktime = low_time_offset - read_vcpu_time; affected_cpu += 1; /* we need to know is that mark_postcopy_end was due to * faulted page, another possible case it's prefetched @@ -726,7 +733,8 @@ static void mark_postcopy_blocktime_end(uintptr_t addr) atomic_sub(&dc->smp_cpus_down, affected_cpu); if (vcpu_total_blocktime) { - dc->total_blocktime += now_ms - atomic_fetch_add(&dc->last_begin, 0); + dc->total_blocktime += low_time_offset - atomic_fetch_add( + &dc->last_begin, 0); } trace_mark_postcopy_blocktime_end(addr, dc, dc->total_blocktime, affected_cpu); diff --git a/migration/trace-events b/migration/trace-events index 59b1a2d..def03c4 100644 --- a/migration/trace-events +++ b/migration/trace-events @@ -115,8 +115,8 @@ process_incoming_migration_co_end(int ret, int ps) "ret=%d postcopy-state=%d" process_incoming_migration_co_postcopy_end_main(void) "" migration_set_incoming_channel(void *ioc, const char *ioctype) "ioc=%p ioctype=%s" migration_set_outgoing_channel(void *ioc, const char *ioctype, const char *hostname, void *err) "ioc=%p ioctype=%s hostname=%s err=%p" -mark_postcopy_blocktime_begin(uint64_t addr, void *dd, int64_t time, int cpu, int received) "addr: 0x%" PRIx64 ", dd: %p, time: %" PRId64 ", cpu: %d, already_received: %d" -mark_postcopy_blocktime_end(uint64_t addr, void *dd, int64_t time, int affected_cpu) "addr: 0x%" PRIx64 ", dd: %p, time: %" PRId64 ", affected_cpu: %d" +mark_postcopy_blocktime_begin(uint64_t addr, void *dd, uint32_t time, int cpu, int received) "addr: 0x%" PRIx64 ", dd: %p, time: %u, cpu: %d, already_received: %d" +mark_postcopy_blocktime_end(uint64_t addr, void *dd, uint32_t time, int affected_cpu) "addr: 0x%" PRIx64 ", dd: %p, time: %u, affected_cpu: %d" # migration/rdma.c qemu_rdma_accept_incoming_migration(void) "" diff --git a/qapi/migration.json b/qapi/migration.json index 90d125c..c4737f8 100644 --- a/qapi/migration.json +++ b/qapi/migration.json @@ -175,8 +175,8 @@ '*setup-time': 'int', '*cpu-throttle-percentage': 'int', '*error-desc': 'str', - '*postcopy-blocktime' : 'int64', - '*postcopy-vcpu-blocktime': ['int64']} } + '*postcopy-blocktime' : 'uint32', + '*postcopy-vcpu-blocktime': ['uint32']} } ## # @query-migrate: -- 2.7.4 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [Qemu-devel] [PATCH v4] migration: change blocktime type to uint32_t 2018-02-22 8:45 ` [Qemu-devel] [PATCH v4] migration: change blocktime type to uint32_t Alexey Perevalov @ 2018-03-08 12:59 ` Dr. David Alan Gilbert 2018-03-12 17:54 ` Alexey Perevalov 0 siblings, 1 reply; 4+ messages in thread From: Dr. David Alan Gilbert @ 2018-03-08 12:59 UTC (permalink / raw) To: Alexey Perevalov Cc: qemu-devel, v.kuramshin, ash.billore, f4bug, quintela, peterx, lvivier * Alexey Perevalov (a.perevalov@samsung.com) wrote: > Initially int64_t was used, but on PowerPC architecture, > clang doesn't have atomic_*_8 function, so it produces > link time error. > > QEMU is working with time as with 64bit value, but by > fact 32 bit is enough with CLOCK_REALTIME. In this case > blocktime will keep only 1200 hours time interval. > > Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> > Acked-by: Eric Blake <eblake@redhat.com> Hi Alexey, So yes, I think that works; can you repost this merged with your full set of block-time code; because we had to revert it, we need to put it back all in again. Thanks, Dave > --- > hmp.c | 4 ++-- > migration/postcopy-ram.c | 52 ++++++++++++++++++++++++++++-------------------- > migration/trace-events | 4 ++-- > qapi/migration.json | 4 ++-- > 4 files changed, 36 insertions(+), 28 deletions(-) > > diff --git a/hmp.c b/hmp.c > index be091e0..ec90043 100644 > --- a/hmp.c > +++ b/hmp.c > @@ -267,7 +267,7 @@ void hmp_info_migrate(Monitor *mon, const QDict *qdict) > } > > if (info->has_postcopy_blocktime) { > - monitor_printf(mon, "postcopy blocktime: %" PRId64 "\n", > + monitor_printf(mon, "postcopy blocktime: %u\n", > info->postcopy_blocktime); > } > > @@ -275,7 +275,7 @@ void hmp_info_migrate(Monitor *mon, const QDict *qdict) > Visitor *v; > char *str; > v = string_output_visitor_new(false, &str); > - visit_type_int64List(v, NULL, &info->postcopy_vcpu_blocktime, NULL); > + visit_type_uint32List(v, NULL, &info->postcopy_vcpu_blocktime, NULL); > visit_complete(v, &str); > monitor_printf(mon, "postcopy vcpu blocktime: %s\n", str); > g_free(str); > diff --git a/migration/postcopy-ram.c b/migration/postcopy-ram.c > index 05475e0..c46225c 100644 > --- a/migration/postcopy-ram.c > +++ b/migration/postcopy-ram.c > @@ -63,16 +63,17 @@ struct PostcopyDiscardState { > > typedef struct PostcopyBlocktimeContext { > /* time when page fault initiated per vCPU */ > - int64_t *page_fault_vcpu_time; > + uint32_t *page_fault_vcpu_time; > /* page address per vCPU */ > uintptr_t *vcpu_addr; > - int64_t total_blocktime; > + uint32_t total_blocktime; > /* blocktime per vCPU */ > - int64_t *vcpu_blocktime; > + uint32_t *vcpu_blocktime; > /* point in time when last page fault was initiated */ > - int64_t last_begin; > + uint32_t last_begin; > /* number of vCPU are suspended */ > int smp_cpus_down; > + uint64_t start_time; > > /* > * Handler for exit event, necessary for > @@ -99,22 +100,23 @@ static void migration_exit_cb(Notifier *n, void *data) > static struct PostcopyBlocktimeContext *blocktime_context_new(void) > { > PostcopyBlocktimeContext *ctx = g_new0(PostcopyBlocktimeContext, 1); > - ctx->page_fault_vcpu_time = g_new0(int64_t, smp_cpus); > + ctx->page_fault_vcpu_time = g_new0(uint32_t, smp_cpus); > ctx->vcpu_addr = g_new0(uintptr_t, smp_cpus); > - ctx->vcpu_blocktime = g_new0(int64_t, smp_cpus); > + ctx->vcpu_blocktime = g_new0(uint32_t, smp_cpus); > > ctx->exit_notifier.notify = migration_exit_cb; > + ctx->start_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME); > qemu_add_exit_notifier(&ctx->exit_notifier); > return ctx; > } > > -static int64List *get_vcpu_blocktime_list(PostcopyBlocktimeContext *ctx) > +static uint32List *get_vcpu_blocktime_list(PostcopyBlocktimeContext *ctx) > { > - int64List *list = NULL, *entry = NULL; > + uint32List *list = NULL, *entry = NULL; > int i; > > for (i = smp_cpus - 1; i >= 0; i--) { > - entry = g_new0(int64List, 1); > + entry = g_new0(uint32List, 1); > entry->value = ctx->vcpu_blocktime[i]; > entry->next = list; > list = entry; > @@ -145,7 +147,7 @@ void fill_destination_postcopy_migration_info(MigrationInfo *info) > info->postcopy_vcpu_blocktime = get_vcpu_blocktime_list(bc); > } > > -static uint64_t get_postcopy_total_blocktime(void) > +static uint32_t get_postcopy_total_blocktime(void) > { > MigrationIncomingState *mis = migration_incoming_get_current(); > PostcopyBlocktimeContext *bc = mis->blocktime_ctx; > @@ -610,6 +612,13 @@ static int get_mem_fault_cpu_index(uint32_t pid) > return -1; > } > > +static uint32_t get_low_time_offset(PostcopyBlocktimeContext *dc) > +{ > + int64_t start_time_offset = qemu_clock_get_ms(QEMU_CLOCK_REALTIME) - > + dc->start_time; > + return start_time_offset < 1 ? 1 : start_time_offset & UINT32_MAX; > +} > + > /* > * This function is being called when pagefault occurs. It > * tracks down vCPU blocking time. > @@ -624,7 +633,7 @@ static void mark_postcopy_blocktime_begin(uintptr_t addr, uint32_t ptid, > int cpu, already_received; > MigrationIncomingState *mis = migration_incoming_get_current(); > PostcopyBlocktimeContext *dc = mis->blocktime_ctx; > - int64_t now_ms; > + uint32_t low_time_offset; > > if (!dc || ptid == 0) { > return; > @@ -634,14 +643,14 @@ static void mark_postcopy_blocktime_begin(uintptr_t addr, uint32_t ptid, > return; > } > > - now_ms = qemu_clock_get_ms(QEMU_CLOCK_REALTIME); > + low_time_offset = get_low_time_offset(dc); > if (dc->vcpu_addr[cpu] == 0) { > atomic_inc(&dc->smp_cpus_down); > } > > - atomic_xchg__nocheck(&dc->last_begin, now_ms); > - atomic_xchg__nocheck(&dc->page_fault_vcpu_time[cpu], now_ms); > - atomic_xchg__nocheck(&dc->vcpu_addr[cpu], addr); > + atomic_xchg(&dc->last_begin, low_time_offset); > + atomic_xchg(&dc->page_fault_vcpu_time[cpu], low_time_offset); > + atomic_xchg(&dc->vcpu_addr[cpu], addr); > > /* check it here, not at the begining of the function, > * due to, check could accur early than bitmap_set in > @@ -688,22 +697,20 @@ static void mark_postcopy_blocktime_end(uintptr_t addr) > MigrationIncomingState *mis = migration_incoming_get_current(); > PostcopyBlocktimeContext *dc = mis->blocktime_ctx; > int i, affected_cpu = 0; > - int64_t now_ms; > bool vcpu_total_blocktime = false; > - int64_t read_vcpu_time; > + uint32_t read_vcpu_time, low_time_offset; > > if (!dc) { > return; > } > > - now_ms = qemu_clock_get_ms(QEMU_CLOCK_REALTIME); > - > + low_time_offset = get_low_time_offset(dc); > /* lookup cpu, to clear it, > * that algorithm looks straighforward, but it's not > * optimal, more optimal algorithm is keeping tree or hash > * where key is address value is a list of */ > for (i = 0; i < smp_cpus; i++) { > - uint64_t vcpu_blocktime = 0; > + uint32_t vcpu_blocktime = 0; > > read_vcpu_time = atomic_fetch_add(&dc->page_fault_vcpu_time[i], 0); > if (atomic_fetch_add(&dc->vcpu_addr[i], 0) != addr || > @@ -711,7 +718,7 @@ static void mark_postcopy_blocktime_end(uintptr_t addr) > continue; > } > atomic_xchg__nocheck(&dc->vcpu_addr[i], 0); > - vcpu_blocktime = now_ms - read_vcpu_time; > + vcpu_blocktime = low_time_offset - read_vcpu_time; > affected_cpu += 1; > /* we need to know is that mark_postcopy_end was due to > * faulted page, another possible case it's prefetched > @@ -726,7 +733,8 @@ static void mark_postcopy_blocktime_end(uintptr_t addr) > > atomic_sub(&dc->smp_cpus_down, affected_cpu); > if (vcpu_total_blocktime) { > - dc->total_blocktime += now_ms - atomic_fetch_add(&dc->last_begin, 0); > + dc->total_blocktime += low_time_offset - atomic_fetch_add( > + &dc->last_begin, 0); > } > trace_mark_postcopy_blocktime_end(addr, dc, dc->total_blocktime, > affected_cpu); > diff --git a/migration/trace-events b/migration/trace-events > index 59b1a2d..def03c4 100644 > --- a/migration/trace-events > +++ b/migration/trace-events > @@ -115,8 +115,8 @@ process_incoming_migration_co_end(int ret, int ps) "ret=%d postcopy-state=%d" > process_incoming_migration_co_postcopy_end_main(void) "" > migration_set_incoming_channel(void *ioc, const char *ioctype) "ioc=%p ioctype=%s" > migration_set_outgoing_channel(void *ioc, const char *ioctype, const char *hostname, void *err) "ioc=%p ioctype=%s hostname=%s err=%p" > -mark_postcopy_blocktime_begin(uint64_t addr, void *dd, int64_t time, int cpu, int received) "addr: 0x%" PRIx64 ", dd: %p, time: %" PRId64 ", cpu: %d, already_received: %d" > -mark_postcopy_blocktime_end(uint64_t addr, void *dd, int64_t time, int affected_cpu) "addr: 0x%" PRIx64 ", dd: %p, time: %" PRId64 ", affected_cpu: %d" > +mark_postcopy_blocktime_begin(uint64_t addr, void *dd, uint32_t time, int cpu, int received) "addr: 0x%" PRIx64 ", dd: %p, time: %u, cpu: %d, already_received: %d" > +mark_postcopy_blocktime_end(uint64_t addr, void *dd, uint32_t time, int affected_cpu) "addr: 0x%" PRIx64 ", dd: %p, time: %u, affected_cpu: %d" > > # migration/rdma.c > qemu_rdma_accept_incoming_migration(void) "" > diff --git a/qapi/migration.json b/qapi/migration.json > index 90d125c..c4737f8 100644 > --- a/qapi/migration.json > +++ b/qapi/migration.json > @@ -175,8 +175,8 @@ > '*setup-time': 'int', > '*cpu-throttle-percentage': 'int', > '*error-desc': 'str', > - '*postcopy-blocktime' : 'int64', > - '*postcopy-vcpu-blocktime': ['int64']} } > + '*postcopy-blocktime' : 'uint32', > + '*postcopy-vcpu-blocktime': ['uint32']} } > > ## > # @query-migrate: > -- > 2.7.4 > -- Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Qemu-devel] [PATCH v4] migration: change blocktime type to uint32_t 2018-03-08 12:59 ` Dr. David Alan Gilbert @ 2018-03-12 17:54 ` Alexey Perevalov 0 siblings, 0 replies; 4+ messages in thread From: Alexey Perevalov @ 2018-03-12 17:54 UTC (permalink / raw) To: Dr. David Alan Gilbert Cc: qemu-devel, v.kuramshin, ash.billore, f4bug, quintela, peterx, lvivier On 03/08/2018 03:59 PM, Dr. David Alan Gilbert wrote: > * Alexey Perevalov (a.perevalov@samsung.com) wrote: >> Initially int64_t was used, but on PowerPC architecture, >> clang doesn't have atomic_*_8 function, so it produces >> link time error. >> >> QEMU is working with time as with 64bit value, but by >> fact 32 bit is enough with CLOCK_REALTIME. In this case >> blocktime will keep only 1200 hours time interval. >> >> Signed-off-by: Alexey Perevalov <a.perevalov@samsung.com> >> Acked-by: Eric Blake <eblake@redhat.com> > Hi Alexey, > So yes, I think that works; can you repost this merged with your full > set of block-time code; because we had to revert it, we need to put it > back all in again. Do you mean just to add this patch to set of reverted patches, or merge code of this patch into "migration: calculate vCPU blocktime on dst side"? > > Thanks, > > Dave > >> --- >> hmp.c | 4 ++-- >> migration/postcopy-ram.c | 52 ++++++++++++++++++++++++++++-------------------- >> migration/trace-events | 4 ++-- >> qapi/migration.json | 4 ++-- >> 4 files changed, 36 insertions(+), 28 deletions(-) >> >> diff --git a/hmp.c b/hmp.c >> index be091e0..ec90043 100644 >> --- a/hmp.c >> +++ b/hmp.c >> @@ -267,7 +267,7 @@ void hmp_info_migrate(Monitor *mon, const QDict *qdict) >> } >> >> if (info->has_postcopy_blocktime) { >> - monitor_printf(mon, "postcopy blocktime: %" PRId64 "\n", >> + monitor_printf(mon, "postcopy blocktime: %u\n", >> info->postcopy_blocktime); >> } >> >> @@ -275,7 +275,7 @@ void hmp_info_migrate(Monitor *mon, const QDict *qdict) >> Visitor *v; >> char *str; >> v = string_output_visitor_new(false, &str); >> - visit_type_int64List(v, NULL, &info->postcopy_vcpu_blocktime, NULL); >> + visit_type_uint32List(v, NULL, &info->postcopy_vcpu_blocktime, NULL); >> visit_complete(v, &str); >> monitor_printf(mon, "postcopy vcpu blocktime: %s\n", str); >> g_free(str); >> diff --git a/migration/postcopy-ram.c b/migration/postcopy-ram.c >> index 05475e0..c46225c 100644 >> --- a/migration/postcopy-ram.c >> +++ b/migration/postcopy-ram.c >> @@ -63,16 +63,17 @@ struct PostcopyDiscardState { >> >> typedef struct PostcopyBlocktimeContext { >> /* time when page fault initiated per vCPU */ >> - int64_t *page_fault_vcpu_time; >> + uint32_t *page_fault_vcpu_time; >> /* page address per vCPU */ >> uintptr_t *vcpu_addr; >> - int64_t total_blocktime; >> + uint32_t total_blocktime; >> /* blocktime per vCPU */ >> - int64_t *vcpu_blocktime; >> + uint32_t *vcpu_blocktime; >> /* point in time when last page fault was initiated */ >> - int64_t last_begin; >> + uint32_t last_begin; >> /* number of vCPU are suspended */ >> int smp_cpus_down; >> + uint64_t start_time; >> >> /* >> * Handler for exit event, necessary for >> @@ -99,22 +100,23 @@ static void migration_exit_cb(Notifier *n, void *data) >> static struct PostcopyBlocktimeContext *blocktime_context_new(void) >> { >> PostcopyBlocktimeContext *ctx = g_new0(PostcopyBlocktimeContext, 1); >> - ctx->page_fault_vcpu_time = g_new0(int64_t, smp_cpus); >> + ctx->page_fault_vcpu_time = g_new0(uint32_t, smp_cpus); >> ctx->vcpu_addr = g_new0(uintptr_t, smp_cpus); >> - ctx->vcpu_blocktime = g_new0(int64_t, smp_cpus); >> + ctx->vcpu_blocktime = g_new0(uint32_t, smp_cpus); >> >> ctx->exit_notifier.notify = migration_exit_cb; >> + ctx->start_time = qemu_clock_get_ms(QEMU_CLOCK_REALTIME); >> qemu_add_exit_notifier(&ctx->exit_notifier); >> return ctx; >> } >> >> -static int64List *get_vcpu_blocktime_list(PostcopyBlocktimeContext *ctx) >> +static uint32List *get_vcpu_blocktime_list(PostcopyBlocktimeContext *ctx) >> { >> - int64List *list = NULL, *entry = NULL; >> + uint32List *list = NULL, *entry = NULL; >> int i; >> >> for (i = smp_cpus - 1; i >= 0; i--) { >> - entry = g_new0(int64List, 1); >> + entry = g_new0(uint32List, 1); >> entry->value = ctx->vcpu_blocktime[i]; >> entry->next = list; >> list = entry; >> @@ -145,7 +147,7 @@ void fill_destination_postcopy_migration_info(MigrationInfo *info) >> info->postcopy_vcpu_blocktime = get_vcpu_blocktime_list(bc); >> } >> >> -static uint64_t get_postcopy_total_blocktime(void) >> +static uint32_t get_postcopy_total_blocktime(void) >> { >> MigrationIncomingState *mis = migration_incoming_get_current(); >> PostcopyBlocktimeContext *bc = mis->blocktime_ctx; >> @@ -610,6 +612,13 @@ static int get_mem_fault_cpu_index(uint32_t pid) >> return -1; >> } >> >> +static uint32_t get_low_time_offset(PostcopyBlocktimeContext *dc) >> +{ >> + int64_t start_time_offset = qemu_clock_get_ms(QEMU_CLOCK_REALTIME) - >> + dc->start_time; >> + return start_time_offset < 1 ? 1 : start_time_offset & UINT32_MAX; >> +} >> + >> /* >> * This function is being called when pagefault occurs. It >> * tracks down vCPU blocking time. >> @@ -624,7 +633,7 @@ static void mark_postcopy_blocktime_begin(uintptr_t addr, uint32_t ptid, >> int cpu, already_received; >> MigrationIncomingState *mis = migration_incoming_get_current(); >> PostcopyBlocktimeContext *dc = mis->blocktime_ctx; >> - int64_t now_ms; >> + uint32_t low_time_offset; >> >> if (!dc || ptid == 0) { >> return; >> @@ -634,14 +643,14 @@ static void mark_postcopy_blocktime_begin(uintptr_t addr, uint32_t ptid, >> return; >> } >> >> - now_ms = qemu_clock_get_ms(QEMU_CLOCK_REALTIME); >> + low_time_offset = get_low_time_offset(dc); >> if (dc->vcpu_addr[cpu] == 0) { >> atomic_inc(&dc->smp_cpus_down); >> } >> >> - atomic_xchg__nocheck(&dc->last_begin, now_ms); >> - atomic_xchg__nocheck(&dc->page_fault_vcpu_time[cpu], now_ms); >> - atomic_xchg__nocheck(&dc->vcpu_addr[cpu], addr); >> + atomic_xchg(&dc->last_begin, low_time_offset); >> + atomic_xchg(&dc->page_fault_vcpu_time[cpu], low_time_offset); >> + atomic_xchg(&dc->vcpu_addr[cpu], addr); >> >> /* check it here, not at the begining of the function, >> * due to, check could accur early than bitmap_set in >> @@ -688,22 +697,20 @@ static void mark_postcopy_blocktime_end(uintptr_t addr) >> MigrationIncomingState *mis = migration_incoming_get_current(); >> PostcopyBlocktimeContext *dc = mis->blocktime_ctx; >> int i, affected_cpu = 0; >> - int64_t now_ms; >> bool vcpu_total_blocktime = false; >> - int64_t read_vcpu_time; >> + uint32_t read_vcpu_time, low_time_offset; >> >> if (!dc) { >> return; >> } >> >> - now_ms = qemu_clock_get_ms(QEMU_CLOCK_REALTIME); >> - >> + low_time_offset = get_low_time_offset(dc); >> /* lookup cpu, to clear it, >> * that algorithm looks straighforward, but it's not >> * optimal, more optimal algorithm is keeping tree or hash >> * where key is address value is a list of */ >> for (i = 0; i < smp_cpus; i++) { >> - uint64_t vcpu_blocktime = 0; >> + uint32_t vcpu_blocktime = 0; >> >> read_vcpu_time = atomic_fetch_add(&dc->page_fault_vcpu_time[i], 0); >> if (atomic_fetch_add(&dc->vcpu_addr[i], 0) != addr || >> @@ -711,7 +718,7 @@ static void mark_postcopy_blocktime_end(uintptr_t addr) >> continue; >> } >> atomic_xchg__nocheck(&dc->vcpu_addr[i], 0); >> - vcpu_blocktime = now_ms - read_vcpu_time; >> + vcpu_blocktime = low_time_offset - read_vcpu_time; >> affected_cpu += 1; >> /* we need to know is that mark_postcopy_end was due to >> * faulted page, another possible case it's prefetched >> @@ -726,7 +733,8 @@ static void mark_postcopy_blocktime_end(uintptr_t addr) >> >> atomic_sub(&dc->smp_cpus_down, affected_cpu); >> if (vcpu_total_blocktime) { >> - dc->total_blocktime += now_ms - atomic_fetch_add(&dc->last_begin, 0); >> + dc->total_blocktime += low_time_offset - atomic_fetch_add( >> + &dc->last_begin, 0); >> } >> trace_mark_postcopy_blocktime_end(addr, dc, dc->total_blocktime, >> affected_cpu); >> diff --git a/migration/trace-events b/migration/trace-events >> index 59b1a2d..def03c4 100644 >> --- a/migration/trace-events >> +++ b/migration/trace-events >> @@ -115,8 +115,8 @@ process_incoming_migration_co_end(int ret, int ps) "ret=%d postcopy-state=%d" >> process_incoming_migration_co_postcopy_end_main(void) "" >> migration_set_incoming_channel(void *ioc, const char *ioctype) "ioc=%p ioctype=%s" >> migration_set_outgoing_channel(void *ioc, const char *ioctype, const char *hostname, void *err) "ioc=%p ioctype=%s hostname=%s err=%p" >> -mark_postcopy_blocktime_begin(uint64_t addr, void *dd, int64_t time, int cpu, int received) "addr: 0x%" PRIx64 ", dd: %p, time: %" PRId64 ", cpu: %d, already_received: %d" >> -mark_postcopy_blocktime_end(uint64_t addr, void *dd, int64_t time, int affected_cpu) "addr: 0x%" PRIx64 ", dd: %p, time: %" PRId64 ", affected_cpu: %d" >> +mark_postcopy_blocktime_begin(uint64_t addr, void *dd, uint32_t time, int cpu, int received) "addr: 0x%" PRIx64 ", dd: %p, time: %u, cpu: %d, already_received: %d" >> +mark_postcopy_blocktime_end(uint64_t addr, void *dd, uint32_t time, int affected_cpu) "addr: 0x%" PRIx64 ", dd: %p, time: %u, affected_cpu: %d" >> >> # migration/rdma.c >> qemu_rdma_accept_incoming_migration(void) "" >> diff --git a/qapi/migration.json b/qapi/migration.json >> index 90d125c..c4737f8 100644 >> --- a/qapi/migration.json >> +++ b/qapi/migration.json >> @@ -175,8 +175,8 @@ >> '*setup-time': 'int', >> '*cpu-throttle-percentage': 'int', >> '*error-desc': 'str', >> - '*postcopy-blocktime' : 'int64', >> - '*postcopy-vcpu-blocktime': ['int64']} } >> + '*postcopy-blocktime' : 'uint32', >> + '*postcopy-vcpu-blocktime': ['uint32']} } >> >> ## >> # @query-migrate: >> -- >> 2.7.4 >> > -- > Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK > > > -- Best regards, Alexey Perevalov ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-03-12 17:54 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <CGME20180222084519eucas1p19bfdda3c62fa37b881f8de2d3602f3f3@eucas1p1.samsung.com>
2018-02-22 8:45 ` [Qemu-devel] [PATCH v4] Fix build on ppc platform in migration/postcopy-ram.c Alexey Perevalov
[not found] ` <CGME20180222084520eucas1p16aa4a165d2e1c0f5ec4da12257eda269@eucas1p1.samsung.com>
2018-02-22 8:45 ` [Qemu-devel] [PATCH v4] migration: change blocktime type to uint32_t Alexey Perevalov
2018-03-08 12:59 ` Dr. David Alan Gilbert
2018-03-12 17:54 ` Alexey Perevalov
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).