From: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
To: Alistair Francis <alistair@alistair23.me>,
Peter Maydell <peter.maydell@linaro.org>,
"Edgar E . Iglesias" <edgar.iglesias@xilinx.com>
Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org>, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH 2/8] sdcard: Display command name when tracing CMD/ACMD
Date: Fri, 9 Mar 2018 16:36:48 +0100 [thread overview]
Message-ID: <20180309153654.13518-3-f4bug@amsat.org> (raw)
In-Reply-To: <20180309153654.13518-1-f4bug@amsat.org>
The SDBus will reuse these functions, so we put them in a new source file.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
hw/sd/sdmmc-internal.h | 20 ++++++++++++++
hw/sd/sd.c | 13 +++++----
hw/sd/sdmmc-internal.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++++++
hw/sd/Makefile.objs | 2 +-
hw/sd/trace-events | 8 +++---
5 files changed, 105 insertions(+), 10 deletions(-)
create mode 100644 hw/sd/sdmmc-internal.c
diff --git a/hw/sd/sdmmc-internal.h b/hw/sd/sdmmc-internal.h
index 0e96cb0081..bf6fb06128 100644
--- a/hw/sd/sdmmc-internal.h
+++ b/hw/sd/sdmmc-internal.h
@@ -12,4 +12,24 @@
#define SDMMC_CMD_MAX 64
+/**
+ * sd_cmd_name:
+ * @cmd: A SD "normal" command, upto SDMMC_CMD_MAX.
+ *
+ * Returns an human useful name describing the command.
+ *
+ * Returns: The command name of @cmd or "UNKNOWN_CMD".
+ */
+const char *sd_cmd_name(uint8_t cmd);
+
+/**
+ * sd_acmd_name:
+ * @cmd: A SD "Application-Specific" command, upto SDMMC_CMD_MAX.
+ *
+ * Returns an human useful name describing the application command.
+ *
+ * Returns: The application command name of @cmd or "UNKNOWN_ACMD".
+ */
+const char *sd_acmd_name(uint8_t cmd);
+
#endif
diff --git a/hw/sd/sd.c b/hw/sd/sd.c
index 4a9520e38e..bb149aa644 100644
--- a/hw/sd/sd.c
+++ b/hw/sd/sd.c
@@ -875,8 +875,8 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)
* However there is no ACMD55, so we want to trace this particular case.
*/
if (req.cmd != 55 || sd->expecting_acmd) {
- trace_sdcard_normal_command(req.cmd, req.arg,
- sd_state_name(sd->state));
+ trace_sdcard_normal_command(sd_cmd_name(req.cmd), req.cmd,
+ req.arg, sd_state_name(sd->state));
}
/* Not interpreting this as an app command */
@@ -1455,7 +1455,8 @@ static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req)
static sd_rsp_type_t sd_app_command(SDState *sd,
SDRequest req)
{
- trace_sdcard_app_command(req.cmd, req.arg);
+ trace_sdcard_app_command(sd_acmd_name(req.cmd),
+ req.cmd, req.arg, sd_state_name(sd->state));
sd->card_status |= APP_CMD;
switch (req.cmd) {
case 6: /* ACMD6: SET_BUS_WIDTH */
@@ -1770,7 +1771,8 @@ void sd_write_data(SDState *sd, uint8_t value)
if (sd->card_status & (ADDRESS_ERROR | WP_VIOLATION))
return;
- trace_sdcard_write_data(sd->current_cmd, value);
+ trace_sdcard_write_data(sd_acmd_name(sd->current_cmd),
+ sd->current_cmd, value);
switch (sd->current_cmd) {
case 24: /* CMD24: WRITE_SINGLE_BLOCK */
sd->data[sd->data_offset ++] = value;
@@ -1908,7 +1910,8 @@ uint8_t sd_read_data(SDState *sd)
io_len = (sd->ocr & (1 << 30)) ? 512 : sd->blk_len;
- trace_sdcard_read_data(sd->current_cmd, io_len);
+ trace_sdcard_read_data(sd_acmd_name(sd->current_cmd),
+ sd->current_cmd, io_len);
switch (sd->current_cmd) {
case 6: /* CMD6: SWITCH_FUNCTION */
ret = sd->data[sd->data_offset ++];
diff --git a/hw/sd/sdmmc-internal.c b/hw/sd/sdmmc-internal.c
new file mode 100644
index 0000000000..2053def3f1
--- /dev/null
+++ b/hw/sd/sdmmc-internal.c
@@ -0,0 +1,72 @@
+/*
+ * SD/MMC cards common helpers
+ *
+ * Copyright (c) 2018 Philippe Mathieu-Daudé <f4bug@amsat.org>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ */
+
+#include "qemu/osdep.h"
+#include "sdmmc-internal.h"
+
+const char *sd_cmd_name(uint8_t cmd)
+{
+ static const char *cmd_abbrev[SDMMC_CMD_MAX] = {
+ [0] = "GO_IDLE_STATE",
+ [2] = "ALL_SEND_CID", [3] = "SEND_RELATIVE_ADDR",
+ [4] = "SET_DSR", [5] = "IO_SEND_OP_COND",
+ [6] = "SWITCH_FUNC", [7] = "SELECT/DESELECT_CARD",
+ [8] = "SEND_IF_COND", [9] = "SEND_CSD",
+ [10] = "SEND_CID", [11] = "VOLTAGE_SWITCH",
+ [12] = "STOP_TRANSMISSION", [13] = "SEND_STATUS",
+ [15] = "GO_INACTIVE_STATE",
+ [16] = "SET_BLOCKLEN", [17] = "READ_SINGLE_BLOCK",
+ [18] = "READ_MULTIPLE_BLOCK", [19] = "SEND_TUNING_BLOCK",
+ [20] = "SPEED_CLASS_CONTROL", [21] = "DPS_spec",
+ [23] = "SET_BLOCK_COUNT",
+ [24] = "WRITE_BLOCK", [25] = "WRITE_MULTIPLE_BLOCK",
+ [26] = "MANUF_RSVD", [27] = "PROGRAM_CSD",
+ [28] = "SET_WRITE_PROT", [29] = "CLR_WRITE_PROT",
+ [30] = "SEND_WRITE_PROT",
+ [32] = "ERASE_WR_BLK_START", [33] = "ERASE_WR_BLK_END",
+ [34] = "SW_FUNC_RSVD", [35] = "SW_FUNC_RSVD",
+ [36] = "SW_FUNC_RSVD", [37] = "SW_FUNC_RSVD",
+ [38] = "ERASE",
+ [40] = "DPS_spec",
+ [42] = "LOCK_UNLOCK", [43] = "Q_MANAGEMENT",
+ [44] = "Q_TASK_INFO_A", [45] = "Q_TASK_INFO_B",
+ [46] = "Q_RD_TASK", [47] = "Q_WR_TASK",
+ [48] = "READ_EXTR_SINGLE", [49] = "WRITE_EXTR_SINGLE",
+ [50] = "SW_FUNC_RSVD",
+ [52] = "IO_RW_DIRECT", [53] = "IO_RW_EXTENDED",
+ [54] = "SDIO_RSVD", [55] = "APP_CMD",
+ [56] = "GEN_CMD", [57] = "SW_FUNC_RSVD",
+ [58] = "READ_EXTR_MULTI", [59] = "WRITE_EXTR_MULTI",
+ [60] = "MANUF_RSVD", [61] = "MANUF_RSVD",
+ [62] = "MANUF_RSVD", [63] = "MANUF_RSVD",
+ };
+ return cmd_abbrev[cmd] ? cmd_abbrev[cmd] : "UNKNOWN_CMD";
+}
+
+const char *sd_acmd_name(uint8_t cmd)
+{
+ static const char *acmd_abbrev[SDMMC_CMD_MAX] = {
+ [6] = "SET_BUS_WIDTH",
+ [13] = "SD_STATUS",
+ [14] = "DPS_spec", [15] = "DPS_spec",
+ [16] = "DPS_spec",
+ [18] = "SECU_spec",
+ [22] = "SEND_NUM_WR_BLOCKS", [23] = "SET_WR_BLK_ERASE_COUNT",
+ [41] = "SD_SEND_OP_COND",
+ [42] = "SET_CLR_CARD_DETECT",
+ [51] = "SEND_SCR",
+ [52] = "SECU_spec", [53] = "SECU_spec",
+ [54] = "SECU_spec",
+ [56] = "SECU_spec", [57] = "SECU_spec",
+ [58] = "SECU_spec", [59] = "SECU_spec",
+ };
+
+ return acmd_abbrev[cmd] ? acmd_abbrev[cmd] : "UNKNOWN_ACMD";
+}
diff --git a/hw/sd/Makefile.objs b/hw/sd/Makefile.objs
index c2b7664264..a99d9fbb04 100644
--- a/hw/sd/Makefile.objs
+++ b/hw/sd/Makefile.objs
@@ -1,6 +1,6 @@
common-obj-$(CONFIG_PL181) += pl181.o
common-obj-$(CONFIG_SSI_SD) += ssi-sd.o
-common-obj-$(CONFIG_SD) += sd.o core.o
+common-obj-$(CONFIG_SD) += sd.o core.o sdmmc-internal.o
common-obj-$(CONFIG_SDHCI) += sdhci.o
obj-$(CONFIG_MILKYMIST) += milkymist-memcard.o
diff --git a/hw/sd/trace-events b/hw/sd/trace-events
index 3040d32560..cdddca3dbf 100644
--- a/hw/sd/trace-events
+++ b/hw/sd/trace-events
@@ -24,8 +24,8 @@ sdhci_write_dataport(uint16_t data_count) "write buffer filled with %u bytes of
sdhci_capareg(const char *desc, uint16_t val) "%s: %u"
# hw/sd/sd.c
-sdcard_normal_command(uint8_t cmd, uint32_t arg, const char *state) "CMD%d arg 0x%08x (state %s)"
-sdcard_app_command(uint8_t acmd, uint32_t arg) "ACMD%d arg 0x%08x"
+sdcard_normal_command(const char *cmd_desc, uint8_t cmd, uint32_t arg, const char *state) "%20s/ CMD%02d arg 0x%08x (state %s)"
+sdcard_app_command(const char *acmd_desc, uint8_t acmd, uint32_t arg, const char *state) "%23s/ACMD%02d arg 0x%08x (state %s)"
sdcard_response(const char *rspdesc, int rsplen) "%s (sz:%d)"
sdcard_powerup(void) ""
sdcard_inquiry_cmd41(void) ""
@@ -39,8 +39,8 @@ sdcard_lock(void) ""
sdcard_unlock(void) ""
sdcard_read_block(uint64_t addr, uint32_t len) "addr 0x%" PRIx64 " size 0x%x"
sdcard_write_block(uint64_t addr, uint32_t len) "addr 0x%" PRIx64 " size 0x%x"
-sdcard_write_data(uint8_t cmd, uint8_t value) "CMD%02d value 0x%02x"
-sdcard_read_data(uint8_t cmd, int length) "CMD%02d len %d"
+sdcard_write_data(const char *cmd_desc, uint8_t cmd, uint8_t value) "%20s/ CMD%02d value 0x%02x"
+sdcard_read_data(const char *cmd_desc, uint8_t cmd, int length) "%20s/ CMD%02d len %d"
sdcard_set_voltage(uint16_t millivolts) "%u mV"
# hw/sd/milkymist-memcard.c
--
2.16.2
next prev parent reply other threads:[~2018-03-09 15:37 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-09 15:36 [Qemu-devel] [PATCH 0/8] SDCard: improve tracing, support UHS-I Philippe Mathieu-Daudé
2018-03-09 15:36 ` [Qemu-devel] [PATCH 1/8] sdcard: Do not trace CMD55, except when we already expect an ACMD Philippe Mathieu-Daudé
2018-03-09 15:44 ` Peter Maydell
2018-03-09 15:36 ` Philippe Mathieu-Daudé [this message]
2018-03-09 15:47 ` [Qemu-devel] [PATCH 2/8] sdcard: Display command name when tracing CMD/ACMD Peter Maydell
2018-03-09 15:36 ` [Qemu-devel] [PATCH 3/8] sdcard: Display which protocol is used when tracing (SD or SPI) Philippe Mathieu-Daudé
2018-03-09 15:36 ` [Qemu-devel] [PATCH 4/8] sdcard: Add the Tuning Command (CMD19) Philippe Mathieu-Daudé
2018-03-09 15:36 ` [Qemu-devel] [PATCH 5/8] sdcard: Implement the UHS-I SWITCH_FUNCTION entries (Spec v3) Philippe Mathieu-Daudé
2018-03-09 17:03 ` Peter Maydell
2018-03-09 17:08 ` Edgar E. Iglesias
2018-03-09 17:33 ` Philippe Mathieu-Daudé
2018-03-12 12:32 ` Philippe Mathieu-Daudé
2018-03-12 12:36 ` Philippe Mathieu-Daudé
2018-03-12 13:12 ` Peter Maydell
2018-03-12 13:03 ` Philippe Mathieu-Daudé
2018-03-12 13:16 ` Peter Maydell
2018-05-22 4:45 ` Philippe Mathieu-Daudé
2018-05-09 5:36 ` Philippe Mathieu-Daudé
2018-03-09 17:06 ` Peter Maydell
2018-03-12 12:36 ` Philippe Mathieu-Daudé
2018-03-12 13:08 ` Peter Maydell
2018-03-09 15:36 ` [Qemu-devel] [PATCH 6/8] sdcard: Add a 'uhs' property, update the OCR register ACCEPT_SWITCH_1V8 bit Philippe Mathieu-Daudé
2018-03-09 15:36 ` [Qemu-devel] [PATCH 7/8] sdhci: Fix a typo in comment Philippe Mathieu-Daudé
2018-03-09 15:43 ` Peter Maydell
2018-03-09 15:36 ` [Qemu-devel] [PATCH 8/8] MAINTAINERS: Add entries for SD (SDHCI, SDBus, SDCard) Philippe Mathieu-Daudé
2018-03-09 15:43 ` Peter Maydell
2018-03-09 17:08 ` [Qemu-devel] [PATCH 0/8] SDCard: improve tracing, support UHS-I Peter Maydell
2018-03-09 17:14 ` Philippe Mathieu-Daudé
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180309153654.13518-3-f4bug@amsat.org \
--to=f4bug@amsat.org \
--cc=alistair@alistair23.me \
--cc=edgar.iglesias@xilinx.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).