From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Philippe Mathieu-Daudé" <f4bug@amsat.org>
Subject: [Qemu-devel] [PULL 43/69] hw/mips/mips_fulong2e: Factor out vt82c686b_southbridge_init()
Date: Tue, 13 Mar 2018 23:46:53 +0100 [thread overview]
Message-ID: <20180313224719.4954-44-pbonzini@redhat.com> (raw)
In-Reply-To: <20180313224719.4954-1-pbonzini@redhat.com>
From: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20180308223946.26784-18-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/mips/mips_fulong2e.c | 83 ++++++++++++++++++++++++-------------------------
1 file changed, 41 insertions(+), 42 deletions(-)
diff --git a/hw/mips/mips_fulong2e.c b/hw/mips/mips_fulong2e.c
index a15d3b60cc..2697d772eb 100644
--- a/hw/mips/mips_fulong2e.c
+++ b/hw/mips/mips_fulong2e.c
@@ -77,8 +77,6 @@
#define FULONG2E_ATI_SLOT 6
#define FULONG2E_RTL8139_SLOT 7
-static ISADevice *pit;
-
static struct _loaderparams {
int ram_size;
const char *kernel_filename;
@@ -231,11 +229,44 @@ static const uint8_t eeprom_spd[0x80] = {
0x20,0x30,0x20
};
-/* Audio support */
-static void audio_init (PCIBus *pci_bus)
+static void vt82c686b_southbridge_init(PCIBus *pci_bus, int slot, qemu_irq intc,
+ I2CBus **i2c_bus, ISABus **p_isa_bus)
{
- vt82c686b_ac97_init(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 5));
- vt82c686b_mc97_init(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 6));
+ qemu_irq *i8259;
+ ISABus *isa_bus;
+ DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
+
+ isa_bus = vt82c686b_init(pci_bus, PCI_DEVFN(slot, 0));
+ if (!isa_bus) {
+ fprintf(stderr, "vt82c686b_init error\n");
+ exit(1);
+ }
+ *p_isa_bus = isa_bus;
+ /* Interrupt controller */
+ /* The 8259 -> IP5 */
+ i8259 = i8259_init(isa_bus, intc);
+ isa_bus_irqs(isa_bus, i8259);
+ /* init other devices */
+ i8254_pit_init(isa_bus, 0x40, 0, NULL);
+ i8257_dma_init(isa_bus, 0);
+
+ ide_drive_get(hd, ARRAY_SIZE(hd));
+ vt82c686b_ide_init(pci_bus, hd, PCI_DEVFN(slot, 1));
+
+ pci_create_simple(pci_bus, PCI_DEVFN(slot, 2), "vt82c686b-usb-uhci");
+ pci_create_simple(pci_bus, PCI_DEVFN(slot, 3), "vt82c686b-usb-uhci");
+
+ *i2c_bus = vt82c686b_pm_init(pci_bus, PCI_DEVFN(slot, 4), 0xeee1, NULL);
+
+ /* Audio support */
+ vt82c686b_ac97_init(pci_bus, PCI_DEVFN(slot, 5));
+ vt82c686b_mc97_init(pci_bus, PCI_DEVFN(slot, 6));
+
+ /* Super I/O */
+ isa_create_simple(isa_bus, TYPE_I8042);
+
+ serial_hds_isa_init(isa_bus, 0, MAX_SERIAL_PORTS);
+ parallel_hds_isa_init(isa_bus, 1);
}
/* Network support */
@@ -268,11 +299,9 @@ static void mips_fulong2e_init(MachineState *machine)
MemoryRegion *bios = g_new(MemoryRegion, 1);
long bios_size;
int64_t kernel_entry;
- qemu_irq *i8259;
PCIBus *pci_bus;
ISABus *isa_bus;
I2CBus *smbus;
- DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
MIPSCPU *cpu;
CPUMIPSState *env;
@@ -334,46 +363,16 @@ static void mips_fulong2e_init(MachineState *machine)
/* North bridge, Bonito --> IP2 */
pci_bus = bonito_init((qemu_irq *)&(env->irq[2]));
- /* South bridge */
- ide_drive_get(hd, ARRAY_SIZE(hd));
-
- isa_bus = vt82c686b_init(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 0));
- if (!isa_bus) {
- error_report("vt82c686b_init error");
- exit(1);
- }
-
- /* Interrupt controller */
- /* The 8259 -> IP5 */
- i8259 = i8259_init(isa_bus, env->irq[5]);
- isa_bus_irqs(isa_bus, i8259);
-
- vt82c686b_ide_init(pci_bus, hd, PCI_DEVFN(FULONG2E_VIA_SLOT, 1));
- pci_create_simple(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 2),
- "vt82c686b-usb-uhci");
- pci_create_simple(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 3),
- "vt82c686b-usb-uhci");
+ /* South bridge -> IP5 */
+ vt82c686b_southbridge_init(pci_bus, FULONG2E_VIA_SLOT, env->irq[5],
+ &smbus, &isa_bus);
- smbus = vt82c686b_pm_init(pci_bus, PCI_DEVFN(FULONG2E_VIA_SLOT, 4),
- 0xeee1, NULL);
/* TODO: Populate SPD eeprom data. */
smbus_eeprom_init(smbus, 1, eeprom_spd, sizeof(eeprom_spd));
- /* init other devices */
- pit = i8254_pit_init(isa_bus, 0x40, 0, NULL);
- i8257_dma_init(isa_bus, 0);
-
- /* Super I/O */
- isa_create_simple(isa_bus, TYPE_I8042);
-
mc146818_rtc_init(isa_bus, 2000, NULL);
- serial_hds_isa_init(isa_bus, 0, MAX_SERIAL_PORTS);
- parallel_hds_isa_init(isa_bus, 1);
-
- /* Sound card */
- audio_init(pci_bus);
- /* Network card */
+ /* Network card: RTL8139D */
network_init(pci_bus);
}
--
2.14.3
next prev parent reply other threads:[~2018-03-13 22:48 UTC|newest]
Thread overview: 83+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-13 22:46 [Qemu-devel] [PULL 00/69] Misc patches for QEMU soft freeze Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 01/69] qom: introduce object_class_get_list_sorted Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 02/69] net: allow using any PCI NICs in -net or -nic Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 03/69] q35: change default NIC to e1000e Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 04/69] scsi-disk.c: consider bl->max_transfer in INQUIRY emulation Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 05/69] qemu-doc: update deprecation section to use -nic and -netdev hubport Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 06/69] qemu-doc: Add the paragraph about the -no-frame deprecation again Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 07/69] build-sys: make help could have 'modules' target Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 08/69] hw: Do not include "sysemu/block-backend.h" if it is not necessary Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 09/69] checkpatch: Exempt long URLs Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 10/69] vl: export machine_init_done Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 11/69] chardev: fix handling of EAGAIN for TCP chardev Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 12/69] chardev: update net listener gcontext Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 13/69] chardev: allow telnet gsource to switch gcontext Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 14/69] chardev: introduce chr_machine_done hook Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 15/69] chardev: use chardev's gcontext for async connect Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 16/69] chardev: tcp: postpone async connection setup Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 17/69] chardev: tcp: let TLS run on chardev context Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 18/69] scsi: support NDOB (no data-out buffer) for WRITE SAME commands Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 19/69] hw/i386: make IOMMUs configurable via default-configs/ Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 20/69] Polish the version strings containing the package version Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 21/69] hw/mips/jazz: Fix implicit creation of "-drive if=scsi" devices Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 22/69] rcutorture: remove synchronize_rcu from readers Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 23/69] docs: document atomic_load_acquire and atomic_store_release Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 24/69] rcu: make memory barriers more explicit Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 25/69] membarrier: introduce qemu/sys_membarrier.h Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 26/69] membarrier: add --enable-membarrier Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 27/69] hw/isa: Move parallel_hds_isa_init() to hw/char/parallel-isa.c Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 28/69] hw/dma/i8257: Rename DMA_init() to i8257_dma_init() Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 29/69] hw/input/i8042: Extract declarations from i386/pc.h into input/i8042.h Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 30/69] MAINTAINERS: Fix the PC87312 include path Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 31/69] hw/isa/pc87312: Rename the device type as TYPE_PC87312_SUPERIO Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 32/69] hw/isa/pc87312: Use uint16_t for the ISA I/O base address Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 33/69] hw/isa/pc87312: Use 'unsigned int' for the irq value Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 34/69] hw/isa/superio: Add a Super I/O template based on the PC87312 device Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 35/69] hw/isa/pc87312: Inherit from the abstract TYPE_ISA_SUPERIO Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 36/69] hw/isa/superio: Factor out the parallel code from pc87312.c Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 37/69] hw/isa/superio: Factor out the serial " Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 38/69] hw/isa/superio: Factor out the floppy disc controller " Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 39/69] hw/isa/superio: Add a keyboard/mouse controller (8042) Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 40/69] hw/isa/superio: Factor out the IDE code from pc87312.c Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 41/69] hw/mips/malta: Code movement Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 42/69] hw/isa/superio: Factor out the FDC37M817 Super I/O from mips_malta.c Paolo Bonzini
2018-03-13 22:46 ` Paolo Bonzini [this message]
2018-03-13 22:46 ` [Qemu-devel] [PULL 44/69] hw/isa/vt82c686: Rename vt82c686b_init() -> vt82c686b_isa_init() Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 45/69] hw/isa/vt82c686: Add the TYPE_VT82C686B_SUPERIO Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 46/69] MAINTAINERS: Add entries for the VT82C686B Super I/O Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 47/69] MAINTAINERS: Split the Alpha TCG/machine section Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 48/69] hw/isa/superio: Add the SMC FDC37C669 Super I/O Paolo Bonzini
2018-03-13 22:46 ` [Qemu-devel] [PULL 49/69] hw/alpha/dp264: Add the ISA DMA controller Paolo Bonzini
2018-03-13 22:47 ` [Qemu-devel] [PULL 50/69] hw/alpha/dp264: Use the TYPE_SMC37C669_SUPERIO Paolo Bonzini
2018-06-01 18:51 ` Emilio G. Cota
2018-06-01 19:49 ` Richard Henderson
2018-06-13 16:21 ` Paolo Bonzini
2018-06-13 16:35 ` Philippe Mathieu-Daudé
2018-06-13 17:17 ` Philippe Mathieu-Daudé
2018-06-14 12:21 ` Philippe Mathieu-Daudé
2018-03-13 22:47 ` [Qemu-devel] [PULL 51/69] hw/i386/pc: Factor out the superio code Paolo Bonzini
2018-03-13 22:47 ` [Qemu-devel] [PULL 52/69] cpu-exec: fix exception_index handling Paolo Bonzini
2018-03-13 22:47 ` [Qemu-devel] [PULL 53/69] replay: fix processing async events Paolo Bonzini
2018-03-13 22:47 ` [Qemu-devel] [PULL 54/69] replay: fixed replay_enable_events Paolo Bonzini
2018-03-13 22:47 ` [Qemu-devel] [PULL 55/69] replay: fix save/load vm for non-empty queue Paolo Bonzini
2018-03-13 22:47 ` [Qemu-devel] [PULL 56/69] replay: added replay log format description Paolo Bonzini
2018-03-13 22:47 ` [Qemu-devel] [PULL 57/69] replay: save prior value of the host clock Paolo Bonzini
2018-03-13 22:47 ` [Qemu-devel] [PULL 58/69] replay/replay.c: bump REPLAY_VERSION again Paolo Bonzini
2018-03-13 22:47 ` [Qemu-devel] [PULL 59/69] replay/replay-internal.c: track holding of replay_lock Paolo Bonzini
2018-03-13 22:47 ` [Qemu-devel] [PULL 60/69] replay: make locking visible outside replay code Paolo Bonzini
2018-03-13 22:47 ` [Qemu-devel] [PULL 61/69] replay: don't destroy mutex at exit Paolo Bonzini
2018-03-13 22:47 ` [Qemu-devel] [PULL 62/69] replay: push replay_mutex_lock up the call tree Paolo Bonzini
2018-03-13 22:47 ` [Qemu-devel] [PULL 63/69] replay: check return values of fwrite Paolo Bonzini
2018-03-13 22:47 ` [Qemu-devel] [PULL 64/69] replay: avoid recursive call of checkpoints Paolo Bonzini
2018-03-13 22:47 ` [Qemu-devel] [PULL 65/69] scripts/replay-dump.py: replay log dumper Paolo Bonzini
2018-03-13 22:47 ` [Qemu-devel] [PULL 66/69] replay: don't process async events when warping the clock Paolo Bonzini
2018-03-13 22:47 ` [Qemu-devel] [PULL 67/69] replay: save vmstate of the asynchronous events Paolo Bonzini
2018-03-13 22:47 ` [Qemu-devel] [PULL 68/69] replay: update documentation Paolo Bonzini
2018-03-13 22:47 ` [Qemu-devel] [PULL 69/69] tcg: fix cpu_io_recompile Paolo Bonzini
2018-03-14 0:15 ` [Qemu-devel] [PULL 00/69] Misc patches for QEMU soft freeze no-reply
2018-03-14 3:35 ` Peter Xu
2018-03-14 10:12 ` Paolo Bonzini
2018-03-14 11:30 ` Eric Blake
2018-03-14 11:36 ` Peter Xu
2018-03-14 11:53 ` Paolo Bonzini
2018-03-16 12:58 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180313224719.4954-44-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=f4bug@amsat.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).