From: Laurent Vivier <laurent@vivier.eu>
To: qemu-devel@nongnu.org
Cc: "Cornelia Huck" <cohuck@redhat.com>,
qemu-s390x@nongnu.org, "Philippe Mathieu-Daudé" <f4bug@amsat.org>,
"Laurent Vivier" <laurent@vivier.eu>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Riku Voipio" <riku.voipio@iki.fi>
Subject: [Qemu-devel] [PATCH for 2.13 14/19] linux-user: move alpha cpu loop to alpha directory
Date: Mon, 26 Mar 2018 21:15:58 +0200 [thread overview]
Message-ID: <20180326191603.10217-15-laurent@vivier.eu> (raw)
In-Reply-To: <20180326191603.10217-1-laurent@vivier.eu>
No code change, only move code from main.c to
alpha/cpu_loop.c.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
---
linux-user/alpha/cpu_loop.c | 199 ++++++++++++++++++++++++++++++++++++++++++
linux-user/main.c | 204 --------------------------------------------
2 files changed, 199 insertions(+), 204 deletions(-)
diff --git a/linux-user/alpha/cpu_loop.c b/linux-user/alpha/cpu_loop.c
index b7700a5561..b87fcaea87 100644
--- a/linux-user/alpha/cpu_loop.c
+++ b/linux-user/alpha/cpu_loop.c
@@ -21,6 +21,205 @@
#include "qemu.h"
#include "cpu_loop-common.h"
+void cpu_loop(CPUAlphaState *env)
+{
+ CPUState *cs = CPU(alpha_env_get_cpu(env));
+ int trapnr;
+ target_siginfo_t info;
+ abi_long sysret;
+
+ while (1) {
+ bool arch_interrupt = true;
+
+ cpu_exec_start(cs);
+ trapnr = cpu_exec(cs);
+ cpu_exec_end(cs);
+ process_queued_cpu_work(cs);
+
+ switch (trapnr) {
+ case EXCP_RESET:
+ fprintf(stderr, "Reset requested. Exit\n");
+ exit(EXIT_FAILURE);
+ break;
+ case EXCP_MCHK:
+ fprintf(stderr, "Machine check exception. Exit\n");
+ exit(EXIT_FAILURE);
+ break;
+ case EXCP_SMP_INTERRUPT:
+ case EXCP_CLK_INTERRUPT:
+ case EXCP_DEV_INTERRUPT:
+ fprintf(stderr, "External interrupt. Exit\n");
+ exit(EXIT_FAILURE);
+ break;
+ case EXCP_MMFAULT:
+ info.si_signo = TARGET_SIGSEGV;
+ info.si_errno = 0;
+ info.si_code = (page_get_flags(env->trap_arg0) & PAGE_VALID
+ ? TARGET_SEGV_ACCERR : TARGET_SEGV_MAPERR);
+ info._sifields._sigfault._addr = env->trap_arg0;
+ queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ break;
+ case EXCP_UNALIGN:
+ info.si_signo = TARGET_SIGBUS;
+ info.si_errno = 0;
+ info.si_code = TARGET_BUS_ADRALN;
+ info._sifields._sigfault._addr = env->trap_arg0;
+ queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ break;
+ case EXCP_OPCDEC:
+ do_sigill:
+ info.si_signo = TARGET_SIGILL;
+ info.si_errno = 0;
+ info.si_code = TARGET_ILL_ILLOPC;
+ info._sifields._sigfault._addr = env->pc;
+ queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ break;
+ case EXCP_ARITH:
+ info.si_signo = TARGET_SIGFPE;
+ info.si_errno = 0;
+ info.si_code = TARGET_FPE_FLTINV;
+ info._sifields._sigfault._addr = env->pc;
+ queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ break;
+ case EXCP_FEN:
+ /* No-op. Linux simply re-enables the FPU. */
+ break;
+ case EXCP_CALL_PAL:
+ switch (env->error_code) {
+ case 0x80:
+ /* BPT */
+ info.si_signo = TARGET_SIGTRAP;
+ info.si_errno = 0;
+ info.si_code = TARGET_TRAP_BRKPT;
+ info._sifields._sigfault._addr = env->pc;
+ queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ break;
+ case 0x81:
+ /* BUGCHK */
+ info.si_signo = TARGET_SIGTRAP;
+ info.si_errno = 0;
+ info.si_code = 0;
+ info._sifields._sigfault._addr = env->pc;
+ queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ break;
+ case 0x83:
+ /* CALLSYS */
+ trapnr = env->ir[IR_V0];
+ sysret = do_syscall(env, trapnr,
+ env->ir[IR_A0], env->ir[IR_A1],
+ env->ir[IR_A2], env->ir[IR_A3],
+ env->ir[IR_A4], env->ir[IR_A5],
+ 0, 0);
+ if (sysret == -TARGET_ERESTARTSYS) {
+ env->pc -= 4;
+ break;
+ }
+ if (sysret == -TARGET_QEMU_ESIGRETURN) {
+ break;
+ }
+ /* Syscall writes 0 to V0 to bypass error check, similar
+ to how this is handled internal to Linux kernel.
+ (Ab)use trapnr temporarily as boolean indicating error. */
+ trapnr = (env->ir[IR_V0] != 0 && sysret < 0);
+ env->ir[IR_V0] = (trapnr ? -sysret : sysret);
+ env->ir[IR_A3] = trapnr;
+ break;
+ case 0x86:
+ /* IMB */
+ /* ??? We can probably elide the code using page_unprotect
+ that is checking for self-modifying code. Instead we
+ could simply call tb_flush here. Until we work out the
+ changes required to turn off the extra write protection,
+ this can be a no-op. */
+ break;
+ case 0x9E:
+ /* RDUNIQUE */
+ /* Handled in the translator for usermode. */
+ abort();
+ case 0x9F:
+ /* WRUNIQUE */
+ /* Handled in the translator for usermode. */
+ abort();
+ case 0xAA:
+ /* GENTRAP */
+ info.si_signo = TARGET_SIGFPE;
+ switch (env->ir[IR_A0]) {
+ case TARGET_GEN_INTOVF:
+ info.si_code = TARGET_FPE_INTOVF;
+ break;
+ case TARGET_GEN_INTDIV:
+ info.si_code = TARGET_FPE_INTDIV;
+ break;
+ case TARGET_GEN_FLTOVF:
+ info.si_code = TARGET_FPE_FLTOVF;
+ break;
+ case TARGET_GEN_FLTUND:
+ info.si_code = TARGET_FPE_FLTUND;
+ break;
+ case TARGET_GEN_FLTINV:
+ info.si_code = TARGET_FPE_FLTINV;
+ break;
+ case TARGET_GEN_FLTINE:
+ info.si_code = TARGET_FPE_FLTRES;
+ break;
+ case TARGET_GEN_ROPRAND:
+ info.si_code = 0;
+ break;
+ default:
+ info.si_signo = TARGET_SIGTRAP;
+ info.si_code = 0;
+ break;
+ }
+ info.si_errno = 0;
+ info._sifields._sigfault._addr = env->pc;
+ queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ break;
+ default:
+ goto do_sigill;
+ }
+ break;
+ case EXCP_DEBUG:
+ info.si_signo = gdb_handlesig(cs, TARGET_SIGTRAP);
+ if (info.si_signo) {
+ info.si_errno = 0;
+ info.si_code = TARGET_TRAP_BRKPT;
+ queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
+ } else {
+ arch_interrupt = false;
+ }
+ break;
+ case EXCP_INTERRUPT:
+ /* Just indicate that signals should be handled asap. */
+ break;
+ case EXCP_ATOMIC:
+ cpu_exec_step_atomic(cs);
+ arch_interrupt = false;
+ break;
+ default:
+ printf ("Unhandled trap: 0x%x\n", trapnr);
+ cpu_dump_state(cs, stderr, fprintf, 0);
+ exit(EXIT_FAILURE);
+ }
+ process_pending_signals (env);
+
+ /* Most of the traps imply a transition through PALcode, which
+ implies an REI instruction has been executed. Which means
+ that RX and LOCK_ADDR should be cleared. But there are a
+ few exceptions for traps internal to QEMU. */
+ if (arch_interrupt) {
+ env->flags &= ~ENV_FLAG_RX_FLAG;
+ env->lock_addr = -1;
+ }
+ }
+}
+
void target_cpu_copy_regs(CPUArchState *env, struct target_pt_regs *regs)
{
+ int i;
+
+ for(i = 0; i < 28; i++) {
+ env->ir[i] = ((abi_ulong *)regs)[i];
+ }
+ env->ir[IR_SP] = regs->usp;
+ env->pc = regs->pc;
}
diff --git a/linux-user/main.c b/linux-user/main.c
index 2a9afb6659..a3c68dad36 100644
--- a/linux-user/main.c
+++ b/linux-user/main.c
@@ -149,200 +149,6 @@ void fork_end(int child)
}
}
-#ifdef TARGET_ALPHA
-void cpu_loop(CPUAlphaState *env)
-{
- CPUState *cs = CPU(alpha_env_get_cpu(env));
- int trapnr;
- target_siginfo_t info;
- abi_long sysret;
-
- while (1) {
- bool arch_interrupt = true;
-
- cpu_exec_start(cs);
- trapnr = cpu_exec(cs);
- cpu_exec_end(cs);
- process_queued_cpu_work(cs);
-
- switch (trapnr) {
- case EXCP_RESET:
- fprintf(stderr, "Reset requested. Exit\n");
- exit(EXIT_FAILURE);
- break;
- case EXCP_MCHK:
- fprintf(stderr, "Machine check exception. Exit\n");
- exit(EXIT_FAILURE);
- break;
- case EXCP_SMP_INTERRUPT:
- case EXCP_CLK_INTERRUPT:
- case EXCP_DEV_INTERRUPT:
- fprintf(stderr, "External interrupt. Exit\n");
- exit(EXIT_FAILURE);
- break;
- case EXCP_MMFAULT:
- info.si_signo = TARGET_SIGSEGV;
- info.si_errno = 0;
- info.si_code = (page_get_flags(env->trap_arg0) & PAGE_VALID
- ? TARGET_SEGV_ACCERR : TARGET_SEGV_MAPERR);
- info._sifields._sigfault._addr = env->trap_arg0;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
- break;
- case EXCP_UNALIGN:
- info.si_signo = TARGET_SIGBUS;
- info.si_errno = 0;
- info.si_code = TARGET_BUS_ADRALN;
- info._sifields._sigfault._addr = env->trap_arg0;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
- break;
- case EXCP_OPCDEC:
- do_sigill:
- info.si_signo = TARGET_SIGILL;
- info.si_errno = 0;
- info.si_code = TARGET_ILL_ILLOPC;
- info._sifields._sigfault._addr = env->pc;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
- break;
- case EXCP_ARITH:
- info.si_signo = TARGET_SIGFPE;
- info.si_errno = 0;
- info.si_code = TARGET_FPE_FLTINV;
- info._sifields._sigfault._addr = env->pc;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
- break;
- case EXCP_FEN:
- /* No-op. Linux simply re-enables the FPU. */
- break;
- case EXCP_CALL_PAL:
- switch (env->error_code) {
- case 0x80:
- /* BPT */
- info.si_signo = TARGET_SIGTRAP;
- info.si_errno = 0;
- info.si_code = TARGET_TRAP_BRKPT;
- info._sifields._sigfault._addr = env->pc;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
- break;
- case 0x81:
- /* BUGCHK */
- info.si_signo = TARGET_SIGTRAP;
- info.si_errno = 0;
- info.si_code = 0;
- info._sifields._sigfault._addr = env->pc;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
- break;
- case 0x83:
- /* CALLSYS */
- trapnr = env->ir[IR_V0];
- sysret = do_syscall(env, trapnr,
- env->ir[IR_A0], env->ir[IR_A1],
- env->ir[IR_A2], env->ir[IR_A3],
- env->ir[IR_A4], env->ir[IR_A5],
- 0, 0);
- if (sysret == -TARGET_ERESTARTSYS) {
- env->pc -= 4;
- break;
- }
- if (sysret == -TARGET_QEMU_ESIGRETURN) {
- break;
- }
- /* Syscall writes 0 to V0 to bypass error check, similar
- to how this is handled internal to Linux kernel.
- (Ab)use trapnr temporarily as boolean indicating error. */
- trapnr = (env->ir[IR_V0] != 0 && sysret < 0);
- env->ir[IR_V0] = (trapnr ? -sysret : sysret);
- env->ir[IR_A3] = trapnr;
- break;
- case 0x86:
- /* IMB */
- /* ??? We can probably elide the code using page_unprotect
- that is checking for self-modifying code. Instead we
- could simply call tb_flush here. Until we work out the
- changes required to turn off the extra write protection,
- this can be a no-op. */
- break;
- case 0x9E:
- /* RDUNIQUE */
- /* Handled in the translator for usermode. */
- abort();
- case 0x9F:
- /* WRUNIQUE */
- /* Handled in the translator for usermode. */
- abort();
- case 0xAA:
- /* GENTRAP */
- info.si_signo = TARGET_SIGFPE;
- switch (env->ir[IR_A0]) {
- case TARGET_GEN_INTOVF:
- info.si_code = TARGET_FPE_INTOVF;
- break;
- case TARGET_GEN_INTDIV:
- info.si_code = TARGET_FPE_INTDIV;
- break;
- case TARGET_GEN_FLTOVF:
- info.si_code = TARGET_FPE_FLTOVF;
- break;
- case TARGET_GEN_FLTUND:
- info.si_code = TARGET_FPE_FLTUND;
- break;
- case TARGET_GEN_FLTINV:
- info.si_code = TARGET_FPE_FLTINV;
- break;
- case TARGET_GEN_FLTINE:
- info.si_code = TARGET_FPE_FLTRES;
- break;
- case TARGET_GEN_ROPRAND:
- info.si_code = 0;
- break;
- default:
- info.si_signo = TARGET_SIGTRAP;
- info.si_code = 0;
- break;
- }
- info.si_errno = 0;
- info._sifields._sigfault._addr = env->pc;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
- break;
- default:
- goto do_sigill;
- }
- break;
- case EXCP_DEBUG:
- info.si_signo = gdb_handlesig(cs, TARGET_SIGTRAP);
- if (info.si_signo) {
- info.si_errno = 0;
- info.si_code = TARGET_TRAP_BRKPT;
- queue_signal(env, info.si_signo, QEMU_SI_FAULT, &info);
- } else {
- arch_interrupt = false;
- }
- break;
- case EXCP_INTERRUPT:
- /* Just indicate that signals should be handled asap. */
- break;
- case EXCP_ATOMIC:
- cpu_exec_step_atomic(cs);
- arch_interrupt = false;
- break;
- default:
- printf ("Unhandled trap: 0x%x\n", trapnr);
- cpu_dump_state(cs, stderr, fprintf, 0);
- exit(EXIT_FAILURE);
- }
- process_pending_signals (env);
-
- /* Most of the traps imply a transition through PALcode, which
- implies an REI instruction has been executed. Which means
- that RX and LOCK_ADDR should be cleared. But there are a
- few exceptions for traps internal to QEMU. */
- if (arch_interrupt) {
- env->flags &= ~ENV_FLAG_RX_FLAG;
- env->lock_addr = -1;
- }
- }
-}
-#endif /* TARGET_ALPHA */
-
#ifdef TARGET_S390X
/* s390x masks the fault address it reports in si_addr for SIGSEGV and SIGBUS */
@@ -1911,16 +1717,6 @@ int main(int argc, char **argv, char **envp)
env->pc = regs->sepc;
env->gpr[xSP] = regs->sp;
}
-#elif defined(TARGET_ALPHA)
- {
- int i;
-
- for(i = 0; i < 28; i++) {
- env->ir[i] = ((abi_ulong *)regs)[i];
- }
- env->ir[IR_SP] = regs->usp;
- env->pc = regs->pc;
- }
#elif defined(TARGET_S390X)
{
int i;
--
2.14.3
next prev parent reply other threads:[~2018-03-26 19:17 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-03-26 19:15 [Qemu-devel] [PATCH for 2.13 00/19] linux-user: move arch specific parts from main.c to arch directories Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 01/19] linux-user: create a dummy per arch cpu_loop.c Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 02/19] linux-user: move i386/x86_64 cpu loop to i386 directory Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 03/19] linux-user: move aarch64 cpu loop to aarch64 directory Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 04/19] linux-user: move arm cpu loop to arm directory Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 05/19] linux-user: move sparc/sparc64 cpu loop to sparc directory Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 06/19] linux-user: move ppc/ppc64 cpu loop to ppc directory Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 07/19] linux-user: move mips/mips64 cpu loop to mips directory Laurent Vivier
2018-03-27 22:21 ` Philippe Mathieu-Daudé
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 08/19] linux-user: move nios2 cpu loop to nios2 directory Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 09/19] linux-user: move openrisc cpu loop to openrisc directory Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 10/19] linux-user: move sh4 cpu loop to sh4 directory Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 11/19] linux-user: move cris cpu loop to cris directory Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 12/19] linux-user: move microblaze cpu loop to microblaze directory Laurent Vivier
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 13/19] linux-user: move m68k cpu loop to m68k directory Laurent Vivier
2018-03-26 19:15 ` Laurent Vivier [this message]
2018-03-27 22:22 ` [Qemu-devel] [PATCH for 2.13 14/19] linux-user: move alpha cpu loop to alpha directory Philippe Mathieu-Daudé
2018-03-26 19:15 ` [Qemu-devel] [PATCH for 2.13 15/19] linux-user: move s390x cpu loop to s390x directory Laurent Vivier
2018-03-27 8:50 ` Cornelia Huck
2018-03-26 19:16 ` [Qemu-devel] [PATCH for 2.13 16/19] linux-user: move tilegx cpu loop to tilegx directory Laurent Vivier
2018-03-26 19:16 ` [Qemu-devel] [PATCH for 2.13 17/19] linux-user: move riscv cpu loop to riscv directory Laurent Vivier
2018-03-26 21:48 ` Michael Clark
2018-03-26 19:16 ` [Qemu-devel] [PATCH for 2.13 18/19] linux-user: move hppa cpu loop to hppa directory Laurent Vivier
2018-03-27 22:23 ` Philippe Mathieu-Daudé
2018-03-26 19:16 ` [Qemu-devel] [PATCH for 2.13 19/19] linux-user: move xtensa cpu loop to xtensa directory Laurent Vivier
2018-03-28 5:37 ` [Qemu-devel] [PATCH for 2.13 00/19] linux-user: move arch specific parts from main.c to arch directories Richard Henderson
2018-03-29 9:54 ` no-reply
2018-03-31 6:41 ` no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180326191603.10217-15-laurent@vivier.eu \
--to=laurent@vivier.eu \
--cc=cohuck@redhat.com \
--cc=f4bug@amsat.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=qemu-s390x@nongnu.org \
--cc=riku.voipio@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).