From: Max Reitz <mreitz@redhat.com>
To: qemu-block@nongnu.org
Cc: qemu-devel@nongnu.org, Max Reitz <mreitz@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>,
Alberto Garcia <berto@igalia.com>, Kevin Wolf <kwolf@redhat.com>
Subject: [Qemu-devel] [PATCH v2 6/9] block: Support BDRV_REQ_WRITE_UNCHANGED in filters
Date: Sat, 21 Apr 2018 15:29:26 +0200 [thread overview]
Message-ID: <20180421132929.21610-7-mreitz@redhat.com> (raw)
In-Reply-To: <20180421132929.21610-1-mreitz@redhat.com>
Update the rest of the filter drivers to support
BDRV_REQ_WRITE_UNCHANGED. They already forward write request flags to
their children, so we just have to announce support for it.
This patch does not cover the replication driver because that currently
does not support flags at all, and because it just grabs the WRITE
permission for its children when it can, so we should be fine just
submitting the incoming WRITE_UNCHANGED requests as normal writes.
It also does not cover format drivers for similar reasons. They all use
bdrv_format_default_perms() as their .bdrv_child_perm() implementation
so they just always grab the WRITE permission for their file children
whenever possible. In addition, it often would be difficult to
ascertain whether incoming unchanging writes end up as unchanging writes
in their files. So we just leave them as normal potentially changing
writes.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
---
block/blkdebug.c | 9 +++++----
block/blkreplay.c | 3 +++
block/blkverify.c | 3 +++
block/copy-on-read.c | 10 ++++++----
block/mirror.c | 2 ++
block/raw-format.c | 9 +++++----
block/throttle.c | 6 ++++--
7 files changed, 28 insertions(+), 14 deletions(-)
diff --git a/block/blkdebug.c b/block/blkdebug.c
index 589712475a..762ec2527c 100644
--- a/block/blkdebug.c
+++ b/block/blkdebug.c
@@ -398,10 +398,11 @@ static int blkdebug_open(BlockDriverState *bs, QDict *options, int flags,
goto out;
}
- bs->supported_write_flags = BDRV_REQ_FUA &
- bs->file->bs->supported_write_flags;
- bs->supported_zero_flags = (BDRV_REQ_FUA | BDRV_REQ_MAY_UNMAP) &
- bs->file->bs->supported_zero_flags;
+ bs->supported_write_flags = BDRV_REQ_WRITE_UNCHANGED |
+ (BDRV_REQ_FUA & bs->file->bs->supported_write_flags);
+ bs->supported_zero_flags = BDRV_REQ_WRITE_UNCHANGED |
+ ((BDRV_REQ_FUA | BDRV_REQ_MAY_UNMAP) &
+ bs->file->bs->supported_zero_flags);
ret = -EINVAL;
/* Set alignment overrides */
diff --git a/block/blkreplay.c b/block/blkreplay.c
index fe5a9b4a98..b016dbeee7 100755
--- a/block/blkreplay.c
+++ b/block/blkreplay.c
@@ -35,6 +35,9 @@ static int blkreplay_open(BlockDriverState *bs, QDict *options, int flags,
goto fail;
}
+ bs->supported_write_flags = BDRV_REQ_WRITE_UNCHANGED;
+ bs->supported_zero_flags = BDRV_REQ_WRITE_UNCHANGED;
+
ret = 0;
fail:
return ret;
diff --git a/block/blkverify.c b/block/blkverify.c
index 331365be33..1646404b46 100644
--- a/block/blkverify.c
+++ b/block/blkverify.c
@@ -141,6 +141,9 @@ static int blkverify_open(BlockDriverState *bs, QDict *options, int flags,
goto fail;
}
+ bs->supported_write_flags = BDRV_REQ_WRITE_UNCHANGED;
+ bs->supported_zero_flags = BDRV_REQ_WRITE_UNCHANGED;
+
ret = 0;
fail:
qemu_opts_del(opts);
diff --git a/block/copy-on-read.c b/block/copy-on-read.c
index 823ec751c4..6a97208888 100644
--- a/block/copy-on-read.c
+++ b/block/copy-on-read.c
@@ -33,11 +33,13 @@ static int cor_open(BlockDriverState *bs, QDict *options, int flags,
return -EINVAL;
}
- bs->supported_write_flags = BDRV_REQ_FUA &
- bs->file->bs->supported_write_flags;
+ bs->supported_write_flags = BDRV_REQ_WRITE_UNCHANGED |
+ (BDRV_REQ_FUA &
+ bs->file->bs->supported_write_flags);
- bs->supported_zero_flags = (BDRV_REQ_FUA | BDRV_REQ_MAY_UNMAP) &
- bs->file->bs->supported_zero_flags;
+ bs->supported_zero_flags = BDRV_REQ_WRITE_UNCHANGED |
+ ((BDRV_REQ_FUA | BDRV_REQ_MAY_UNMAP) &
+ bs->file->bs->supported_zero_flags);
return 0;
}
diff --git a/block/mirror.c b/block/mirror.c
index 820f512c7b..6fdd36d27f 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -1148,6 +1148,8 @@ static void mirror_start_job(const char *job_id, BlockDriverState *bs,
mirror_top_bs->implicit = true;
}
mirror_top_bs->total_sectors = bs->total_sectors;
+ mirror_top_bs->supported_write_flags = BDRV_REQ_WRITE_UNCHANGED;
+ mirror_top_bs->supported_zero_flags = BDRV_REQ_WRITE_UNCHANGED;
bdrv_set_aio_context(mirror_top_bs, bdrv_get_aio_context(bs));
/* bdrv_append takes ownership of the mirror_top_bs reference, need to keep
diff --git a/block/raw-format.c b/block/raw-format.c
index a378547c99..fe33693a2d 100644
--- a/block/raw-format.c
+++ b/block/raw-format.c
@@ -415,10 +415,11 @@ static int raw_open(BlockDriverState *bs, QDict *options, int flags,
}
bs->sg = bs->file->bs->sg;
- bs->supported_write_flags = BDRV_REQ_FUA &
- bs->file->bs->supported_write_flags;
- bs->supported_zero_flags = (BDRV_REQ_FUA | BDRV_REQ_MAY_UNMAP) &
- bs->file->bs->supported_zero_flags;
+ bs->supported_write_flags = BDRV_REQ_WRITE_UNCHANGED |
+ (BDRV_REQ_FUA & bs->file->bs->supported_write_flags);
+ bs->supported_zero_flags = BDRV_REQ_WRITE_UNCHANGED |
+ ((BDRV_REQ_FUA | BDRV_REQ_MAY_UNMAP) &
+ bs->file->bs->supported_zero_flags);
if (bs->probed && !bdrv_is_read_only(bs)) {
fprintf(stderr,
diff --git a/block/throttle.c b/block/throttle.c
index 95ed06acd8..e298827f95 100644
--- a/block/throttle.c
+++ b/block/throttle.c
@@ -81,8 +81,10 @@ static int throttle_open(BlockDriverState *bs, QDict *options,
if (!bs->file) {
return -EINVAL;
}
- bs->supported_write_flags = bs->file->bs->supported_write_flags;
- bs->supported_zero_flags = bs->file->bs->supported_zero_flags;
+ bs->supported_write_flags = bs->file->bs->supported_write_flags |
+ BDRV_REQ_WRITE_UNCHANGED;
+ bs->supported_zero_flags = bs->file->bs->supported_zero_flags |
+ BDRV_REQ_WRITE_UNCHANGED;
return throttle_configure_tgm(bs, tgm, options, errp);
}
--
2.14.3
next prev parent reply other threads:[~2018-04-21 13:29 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-21 13:29 [Qemu-devel] [PATCH v2 0/9] block: Add COR filter driver Max Reitz
2018-04-21 13:29 ` [Qemu-devel] [PATCH v2 1/9] " Max Reitz
2018-04-24 15:08 ` Alberto Garcia
2018-04-25 11:18 ` Max Reitz
2018-04-25 11:35 ` Alberto Garcia
2018-04-21 13:29 ` [Qemu-devel] [PATCH v2 2/9] block: BLK_PERM_WRITE includes ..._UNCHANGED Max Reitz
2018-04-21 13:29 ` [Qemu-devel] [PATCH v2 3/9] block: Add BDRV_REQ_WRITE_UNCHANGED flag Max Reitz
2018-04-25 14:33 ` Eric Blake
2018-04-25 15:08 ` Max Reitz
2018-04-26 2:12 ` Eric Blake
2018-04-26 8:58 ` Kevin Wolf
2018-04-28 11:19 ` Max Reitz
2018-04-30 8:41 ` Kevin Wolf
2018-04-21 13:29 ` [Qemu-devel] [PATCH v2 4/9] block: Set BDRV_REQ_WRITE_UNCHANGED for COR writes Max Reitz
2018-04-21 13:29 ` [Qemu-devel] [PATCH v2 5/9] block/quorum: Support BDRV_REQ_WRITE_UNCHANGED Max Reitz
2018-04-21 13:29 ` Max Reitz [this message]
2018-04-21 13:29 ` [Qemu-devel] [PATCH v2 7/9] iotests: Clean up wrap image in 197 Max Reitz
2018-04-21 13:29 ` [Qemu-devel] [PATCH v2 8/9] iotests: Copy 197 for COR filter driver Max Reitz
2018-04-24 15:17 ` Alberto Garcia
2018-04-21 13:29 ` [Qemu-devel] [PATCH v2 9/9] iotests: Add test for COR across nodes Max Reitz
2018-04-24 16:50 ` Kevin Wolf
2018-04-24 16:51 ` [Qemu-devel] [PATCH v2 0/9] block: Add COR filter driver Kevin Wolf
2018-04-25 12:18 ` Max Reitz
2018-04-25 14:36 ` Eric Blake
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180421132929.21610-7-mreitz@redhat.com \
--to=mreitz@redhat.com \
--cc=berto@igalia.com \
--cc=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).