qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: Stefan Hajnoczi <stefanha@redhat.com>,
	"Denis V. Lunev" <den@openvz.org>, Kevin Wolf <kwolf@redhat.com>,
	Max Reitz <mreitz@redhat.com>,
	"open list:parallels" <qemu-block@nongnu.org>
Subject: [Qemu-devel] [PATCH 1/8] parallels: Switch to byte-based calls
Date: Wed, 25 Apr 2018 13:32:16 -0500	[thread overview]
Message-ID: <20180425183223.580566-2-eblake@redhat.com> (raw)
In-Reply-To: <20180425183223.580566-1-eblake@redhat.com>

We are gradually moving away from sector-based interfaces, towards
byte-based.  Make the change for the last few sector-based calls
into the block layer from the parallels driver.

Ideally, the parallels driver should switch to doing everything
byte-based, but that's a more invasive change that requires a
bit more auditing.

Signed-off-by: Eric Blake <eblake@redhat.com>
---
 block/parallels.c | 16 ++++++++++------
 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/block/parallels.c b/block/parallels.c
index 3f74fcb877a..c071c7f759f 100644
--- a/block/parallels.c
+++ b/block/parallels.c
@@ -226,14 +226,15 @@ static int64_t allocate_clusters(BlockDriverState *bs, int64_t sector_num,
         };
         qemu_iovec_init_external(&qiov, &iov, 1);

-        ret = bdrv_co_readv(bs->backing, idx * s->tracks, nb_cow_sectors,
-                            &qiov);
+        ret = bdrv_co_preadv(bs->backing, idx * s->tracks * BDRV_SECTOR_SIZE,
+                             nb_cow_bytes, &qiov, 0);
         if (ret < 0) {
             qemu_vfree(iov.iov_base);
             return ret;
         }

-        ret = bdrv_co_writev(bs->file, s->data_end, nb_cow_sectors, &qiov);
+        ret = bdrv_co_pwritev(bs->file, s->data_end * BDRV_SECTOR_SIZE,
+                              nb_cow_bytes, &qiov, 0);
         qemu_vfree(iov.iov_base);
         if (ret < 0) {
             return ret;
@@ -339,7 +340,8 @@ static coroutine_fn int parallels_co_writev(BlockDriverState *bs,
         qemu_iovec_reset(&hd_qiov);
         qemu_iovec_concat(&hd_qiov, qiov, bytes_done, nbytes);

-        ret = bdrv_co_writev(bs->file, position, n, &hd_qiov);
+        ret = bdrv_co_pwritev(bs->file, position * BDRV_SECTOR_SIZE, nbytes,
+                              &hd_qiov, 0);
         if (ret < 0) {
             break;
         }
@@ -378,7 +380,8 @@ static coroutine_fn int parallels_co_readv(BlockDriverState *bs,

         if (position < 0) {
             if (bs->backing) {
-                ret = bdrv_co_readv(bs->backing, sector_num, n, &hd_qiov);
+                ret = bdrv_co_preadv(bs->backing, sector_num * BDRV_SECTOR_SIZE,
+                                     nbytes, &hd_qiov, 0);
                 if (ret < 0) {
                     break;
                 }
@@ -386,7 +389,8 @@ static coroutine_fn int parallels_co_readv(BlockDriverState *bs,
                 qemu_iovec_memset(&hd_qiov, 0, 0, nbytes);
             }
         } else {
-            ret = bdrv_co_readv(bs->file, position, n, &hd_qiov);
+            ret = bdrv_co_preadv(bs->file, position * BDRV_SECTOR_SIZE, nbytes,
+                                 &hd_qiov, 0);
             if (ret < 0) {
                 break;
             }
-- 
2.14.3

  reply	other threads:[~2018-04-25 18:32 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-25 18:32 [Qemu-devel] [PATCH 0/8] block: more byte-based cleanups: vectored I/O Eric Blake
2018-04-25 18:32 ` Eric Blake [this message]
2018-05-23 19:19   ` [Qemu-devel] [Qemu-block] [PATCH 1/8] parallels: Switch to byte-based calls John Snow
2018-05-23 20:09     ` Eric Blake
2018-05-23 20:10       ` John Snow
2018-05-25 15:22   ` [Qemu-devel] " Stefan Hajnoczi
2018-05-25 16:29   ` Denis V. Lunev
2018-04-25 18:32 ` [Qemu-devel] [PATCH 2/8] qcow: Switch get_cluster_offset to be byte-based Eric Blake
2018-05-28 10:52   ` Kevin Wolf
2018-05-29 15:03     ` Eric Blake
2018-05-29 15:10       ` Kevin Wolf
2018-04-25 18:32 ` [Qemu-devel] [PATCH 3/8] qcow: Switch qcow_co_readv to byte-based calls Eric Blake
2018-05-28 11:04   ` Kevin Wolf
2018-05-29 15:03     ` Eric Blake
2018-04-25 18:32 ` [Qemu-devel] [PATCH 4/8] qcow: Switch qcow_co_writev " Eric Blake
2018-05-28 11:09   ` Kevin Wolf
2018-04-25 18:32 ` [Qemu-devel] [PATCH 5/8] qcow: Switch to a byte-based driver Eric Blake
2018-04-25 18:32 ` [Qemu-devel] [PATCH 6/8] replication: Switch to byte-based calls Eric Blake
2018-04-25 18:32 ` [Qemu-devel] [PATCH 7/8] vhdx: " Eric Blake
2018-04-25 18:32 ` [Qemu-devel] [PATCH 8/8] block: Removed unused sector-based vectored I/O Eric Blake
2018-05-25 15:22   ` Stefan Hajnoczi
2018-05-28 11:19 ` [Qemu-devel] [PATCH 0/8] block: more byte-based cleanups: " Kevin Wolf
2018-05-29 15:00   ` Eric Blake

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180425183223.580566-2-eblake@redhat.com \
    --to=eblake@redhat.com \
    --cc=den@openvz.org \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).