From: Eric Blake <eblake@redhat.com>
To: qemu-devel@nongnu.org
Cc: Kevin Wolf <kwolf@redhat.com>, Max Reitz <mreitz@redhat.com>,
"open list:qcow" <qemu-block@nongnu.org>
Subject: [Qemu-devel] [PATCH 2/8] qcow: Switch get_cluster_offset to be byte-based
Date: Wed, 25 Apr 2018 13:32:17 -0500 [thread overview]
Message-ID: <20180425183223.580566-3-eblake@redhat.com> (raw)
In-Reply-To: <20180425183223.580566-1-eblake@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Make the change for the internal helper function
get_cluster_offset(), by changing n_start and n_end to by byte
offsets rather than sector indices within the cluster being
allocated.
A later patch will then switch the qcow driver as a whole over
to byte-based operation.
Signed-off-by: Eric Blake <eblake@redhat.com>
---
block/qcow.c | 28 ++++++++++++++--------------
1 file changed, 14 insertions(+), 14 deletions(-)
diff --git a/block/qcow.c b/block/qcow.c
index dd042b8ddbe..32730a8dd91 100644
--- a/block/qcow.c
+++ b/block/qcow.c
@@ -345,8 +345,8 @@ static int qcow_reopen_prepare(BDRVReopenState *state,
*
* 0 to not allocate.
*
- * 1 to allocate a normal cluster (for sector indexes 'n_start' to
- * 'n_end')
+ * 1 to allocate a normal cluster (for byte offsets 'n_start' to
+ * 'n_end' within the cluster)
*
* 2 to allocate a compressed cluster of size
* 'compressed_size'. 'compressed_size' must be > 0 and <
@@ -442,7 +442,7 @@ static int get_cluster_offset(BlockDriverState *bs,
BLKDBG_EVENT(bs->file, BLKDBG_CLUSTER_ALLOC);
/* allocate a new cluster */
if ((cluster_offset & QCOW_OFLAG_COMPRESSED) &&
- (n_end - n_start) < s->cluster_sectors) {
+ (n_end - n_start) < s->cluster_size) {
/* if the cluster is already compressed, we must
decompress it in the case it is not completely
overwritten */
@@ -480,16 +480,15 @@ static int get_cluster_offset(BlockDriverState *bs,
/* if encrypted, we must initialize the cluster
content which won't be written */
if (bs->encrypted &&
- (n_end - n_start) < s->cluster_sectors) {
- uint64_t start_sect;
+ (n_end - n_start) < s->cluster_size) {
+ uint64_t start_offset;
assert(s->crypto);
- start_sect = (offset & ~(s->cluster_size - 1)) >> 9;
- for(i = 0; i < s->cluster_sectors; i++) {
+ start_offset = offset & ~(s->cluster_size - 1);
+ for (i = 0; i < s->cluster_size; i += BDRV_SECTOR_SIZE) {
if (i < n_start || i >= n_end) {
- memset(s->cluster_data, 0x00, 512);
+ memset(s->cluster_data, 0x00, BDRV_SECTOR_SIZE);
if (qcrypto_block_encrypt(s->crypto,
- (start_sect + i) *
- BDRV_SECTOR_SIZE,
+ start_offset + i,
s->cluster_data,
BDRV_SECTOR_SIZE,
NULL) < 0) {
@@ -497,8 +496,9 @@ static int get_cluster_offset(BlockDriverState *bs,
}
BLKDBG_EVENT(bs->file, BLKDBG_WRITE_AIO);
ret = bdrv_pwrite(bs->file,
- cluster_offset + i * 512,
- s->cluster_data, 512);
+ cluster_offset + i,
+ s->cluster_data,
+ BDRV_SECTOR_SIZE);
if (ret < 0) {
return ret;
}
@@ -758,8 +758,8 @@ static coroutine_fn int qcow_co_writev(BlockDriverState *bs, int64_t sector_num,
n = nb_sectors;
}
ret = get_cluster_offset(bs, sector_num << 9, 1, 0,
- index_in_cluster,
- index_in_cluster + n, &cluster_offset);
+ index_in_cluster << 9,
+ (index_in_cluster + n) << 9, &cluster_offset);
if (ret < 0) {
break;
}
--
2.14.3
next prev parent reply other threads:[~2018-04-25 18:32 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-25 18:32 [Qemu-devel] [PATCH 0/8] block: more byte-based cleanups: vectored I/O Eric Blake
2018-04-25 18:32 ` [Qemu-devel] [PATCH 1/8] parallels: Switch to byte-based calls Eric Blake
2018-05-23 19:19 ` [Qemu-devel] [Qemu-block] " John Snow
2018-05-23 20:09 ` Eric Blake
2018-05-23 20:10 ` John Snow
2018-05-25 15:22 ` [Qemu-devel] " Stefan Hajnoczi
2018-05-25 16:29 ` Denis V. Lunev
2018-04-25 18:32 ` Eric Blake [this message]
2018-05-28 10:52 ` [Qemu-devel] [PATCH 2/8] qcow: Switch get_cluster_offset to be byte-based Kevin Wolf
2018-05-29 15:03 ` Eric Blake
2018-05-29 15:10 ` Kevin Wolf
2018-04-25 18:32 ` [Qemu-devel] [PATCH 3/8] qcow: Switch qcow_co_readv to byte-based calls Eric Blake
2018-05-28 11:04 ` Kevin Wolf
2018-05-29 15:03 ` Eric Blake
2018-04-25 18:32 ` [Qemu-devel] [PATCH 4/8] qcow: Switch qcow_co_writev " Eric Blake
2018-05-28 11:09 ` Kevin Wolf
2018-04-25 18:32 ` [Qemu-devel] [PATCH 5/8] qcow: Switch to a byte-based driver Eric Blake
2018-04-25 18:32 ` [Qemu-devel] [PATCH 6/8] replication: Switch to byte-based calls Eric Blake
2018-04-25 18:32 ` [Qemu-devel] [PATCH 7/8] vhdx: " Eric Blake
2018-04-25 18:32 ` [Qemu-devel] [PATCH 8/8] block: Removed unused sector-based vectored I/O Eric Blake
2018-05-25 15:22 ` Stefan Hajnoczi
2018-05-28 11:19 ` [Qemu-devel] [PATCH 0/8] block: more byte-based cleanups: " Kevin Wolf
2018-05-29 15:00 ` Eric Blake
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180425183223.580566-3-eblake@redhat.com \
--to=eblake@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).