From: Francisco Iglesias <frasse.iglesias@gmail.com>
To: qemu-devel@nongnu.org
Cc: edgari@xilinx.com, sai.pavan.boddu@xilinx.com,
alistair@alistair23.me, alistair23@gmail.com,
francisco.iglesias@feimtech.se, peter.maydell@linaro.org
Subject: [Qemu-devel] [PATCH v1 2/2] xlnx-zynqmp: Connect the ZynqMP GDMA and ADMA
Date: Sun, 29 Apr 2018 02:43:29 +0200 [thread overview]
Message-ID: <20180429004329.21067-3-frasse.iglesias@gmail.com> (raw)
In-Reply-To: <20180429004329.21067-1-frasse.iglesias@gmail.com>
The ZynqMP contains two instances of a generic DMA, the GDMA, located in the
FPD (full power domain), and the ADMA, located in LPD (low power domain). This
patch adds these two DMAs to the ZynqMP board.
Signed-off-by: Francisco Iglesias <frasse.iglesias@gmail.com>
---
hw/arm/xlnx-zynqmp.c | 53 ++++++++++++++++++++++++++++++++++++++++++++
include/hw/arm/xlnx-zynqmp.h | 5 +++++
2 files changed, 58 insertions(+)
diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
index 505253e0d2..d8c3c9e8d9 100644
--- a/hw/arm/xlnx-zynqmp.c
+++ b/hw/arm/xlnx-zynqmp.c
@@ -90,6 +90,24 @@ static const int spi_intr[XLNX_ZYNQMP_NUM_SPIS] = {
19, 20,
};
+static const uint64_t gdma_addr[XLNX_ZYNQMP_NUM_GDMA] = {
+ 0xFD500000, 0xFD510000, 0xFD520000, 0xFD530000,
+ 0xFD540000, 0xFD550000, 0xFD560000, 0xFD570000
+};
+
+static const int gdma_intr[XLNX_ZYNQMP_NUM_GDMA] = {
+ 124, 125, 126, 127, 128, 129, 130, 131
+};
+
+static const uint64_t adma_addr[XLNX_ZYNQMP_NUM_ADMA] = {
+ 0xFFA80000, 0xFFA90000, 0xFFAA0000, 0xFFAB0000,
+ 0xFFAC0000, 0xFFAD0000, 0xFFAE0000, 0xFFAF0000
+};
+
+static const int adma_intr[XLNX_ZYNQMP_NUM_ADMA] = {
+ 77, 78, 79, 80, 81, 82, 83, 84
+};
+
typedef struct XlnxZynqMPGICRegion {
int region_index;
uint32_t address;
@@ -197,6 +215,16 @@ static void xlnx_zynqmp_init(Object *obj)
object_initialize(&s->rtc, sizeof(s->rtc), TYPE_XLNX_ZYNQMP_RTC);
qdev_set_parent_bus(DEVICE(&s->rtc), sysbus_get_default());
+
+ for (i = 0; i < XLNX_ZYNQMP_NUM_GDMA; i++) {
+ object_initialize(&s->gdma[i], sizeof(s->gdma[i]), TYPE_XLNX_ZDMA);
+ qdev_set_parent_bus(DEVICE(&s->gdma[i]), sysbus_get_default());
+ }
+
+ for (i = 0; i < XLNX_ZYNQMP_NUM_ADMA; i++) {
+ object_initialize(&s->adma[i], sizeof(s->adma[i]), TYPE_XLNX_ZDMA);
+ qdev_set_parent_bus(DEVICE(&s->adma[i]), sysbus_get_default());
+ }
}
static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
@@ -492,6 +520,31 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
}
sysbus_mmio_map(SYS_BUS_DEVICE(&s->rtc), 0, RTC_ADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0, gic_spi[RTC_IRQ]);
+
+ for (i = 0; i < XLNX_ZYNQMP_NUM_GDMA; i++) {
+ object_property_set_uint(OBJECT(&s->gdma[i]), 128, "bus-width", &err);
+ object_property_set_bool(OBJECT(&s->gdma[i]), true, "realized", &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->gdma[i]), 0, gdma_addr[i]);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->gdma[i]), 0,
+ gic_spi[gdma_intr[i]]);
+ }
+
+ for (i = 0; i < XLNX_ZYNQMP_NUM_ADMA; i++) {
+ object_property_set_bool(OBJECT(&s->adma[i]), true, "realized", &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->adma[i]), 0, adma_addr[i]);
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->adma[i]), 0,
+ gic_spi[adma_intr[i]]);
+ }
}
static Property xlnx_zynqmp_props[] = {
diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h
index 3b613e364d..9824a0fa17 100644
--- a/include/hw/arm/xlnx-zynqmp.h
+++ b/include/hw/arm/xlnx-zynqmp.h
@@ -27,6 +27,7 @@
#include "hw/sd/sdhci.h"
#include "hw/ssi/xilinx_spips.h"
#include "hw/dma/xlnx_dpdma.h"
+#include "hw/dma/xlnx-zdma.h"
#include "hw/display/xlnx_dp.h"
#include "hw/intc/xlnx-zynqmp-ipi.h"
#include "hw/timer/xlnx-zynqmp-rtc.h"
@@ -41,6 +42,8 @@
#define XLNX_ZYNQMP_NUM_UARTS 2
#define XLNX_ZYNQMP_NUM_SDHCI 2
#define XLNX_ZYNQMP_NUM_SPIS 2
+#define XLNX_ZYNQMP_NUM_GDMA 8
+#define XLNX_ZYNQMP_NUM_ADMA 8
#define XLNX_ZYNQMP_NUM_QSPI_BUS 2
#define XLNX_ZYNQMP_NUM_QSPI_BUS_CS 2
@@ -94,6 +97,8 @@ typedef struct XlnxZynqMPState {
XlnxDPDMAState dpdma;
XlnxZynqMPIPI ipi;
XlnxZynqMPRTC rtc;
+ XlnxZDMA gdma[XLNX_ZYNQMP_NUM_GDMA];
+ XlnxZDMA adma[XLNX_ZYNQMP_NUM_ADMA];
char *boot_cpu;
ARMCPU *boot_cpu_ptr;
--
2.11.0
prev parent reply other threads:[~2018-04-29 0:43 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-29 0:43 [Qemu-devel] [PATCH v1 0/2] xlnx-zynqmp: Add emulation of the ZynqMP GDMA and ADMA Francisco Iglesias
2018-04-29 0:43 ` [Qemu-devel] [PATCH v1 1/2] xlnx-zdma: Add a model of the Xilinx ZynqMP generic DMA Francisco Iglesias
2018-04-30 13:27 ` Sai Pavan Boddu
2018-05-02 19:58 ` francisco iglesias
2018-04-30 13:42 ` Edgar E. Iglesias
2018-05-02 19:58 ` francisco iglesias
2018-04-29 0:43 ` Francisco Iglesias [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180429004329.21067-3-frasse.iglesias@gmail.com \
--to=frasse.iglesias@gmail.com \
--cc=alistair23@gmail.com \
--cc=alistair@alistair23.me \
--cc=edgari@xilinx.com \
--cc=francisco.iglesias@feimtech.se \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=sai.pavan.boddu@xilinx.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).