qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Xu <peterx@redhat.com>
To: qemu-devel@nongnu.org
Cc: Alexey Perevalov <a.perevalov@samsung.com>,
	"Daniel P . Berrange" <berrange@redhat.com>,
	Juan Quintela <quintela@redhat.com>,
	Andrea Arcangeli <aarcange@redhat.com>,
	"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
	peterx@redhat.com
Subject: [Qemu-devel] [PATCH v8 11/24] migration: new cmd MIG_CMD_RECV_BITMAP
Date: Wed,  2 May 2018 18:47:27 +0800	[thread overview]
Message-ID: <20180502104740.12123-12-peterx@redhat.com> (raw)
In-Reply-To: <20180502104740.12123-1-peterx@redhat.com>

Add a new vm command MIG_CMD_RECV_BITMAP to request received bitmap for
one ramblock.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
---
 migration/savevm.h     |  1 +
 migration/savevm.c     | 61 ++++++++++++++++++++++++++++++++++++++++++++++++++
 migration/trace-events |  2 ++
 3 files changed, 64 insertions(+)

diff --git a/migration/savevm.h b/migration/savevm.h
index cf4f0d37ca..b8cee00d41 100644
--- a/migration/savevm.h
+++ b/migration/savevm.h
@@ -47,6 +47,7 @@ int qemu_savevm_send_packaged(QEMUFile *f, const uint8_t *buf, size_t len);
 void qemu_savevm_send_postcopy_advise(QEMUFile *f);
 void qemu_savevm_send_postcopy_listen(QEMUFile *f);
 void qemu_savevm_send_postcopy_run(QEMUFile *f);
+void qemu_savevm_send_recv_bitmap(QEMUFile *f, char *block_name);
 
 void qemu_savevm_send_postcopy_ram_discard(QEMUFile *f, const char *name,
                                            uint16_t len,
diff --git a/migration/savevm.c b/migration/savevm.c
index 6ee69d8283..9f4a95d411 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -81,6 +81,7 @@ enum qemu_vm_cmd {
                                       were previously sent during
                                       precopy but are dirty. */
     MIG_CMD_PACKAGED,          /* Send a wrapped stream within this stream */
+    MIG_CMD_RECV_BITMAP,       /* Request for recved bitmap on dst */
     MIG_CMD_MAX
 };
 
@@ -98,6 +99,7 @@ static struct mig_cmd_args {
     [MIG_CMD_POSTCOPY_RAM_DISCARD] = {
                                    .len = -1, .name = "POSTCOPY_RAM_DISCARD" },
     [MIG_CMD_PACKAGED]         = { .len =  4, .name = "PACKAGED" },
+    [MIG_CMD_RECV_BITMAP]      = { .len = -1, .name = "RECV_BITMAP" },
     [MIG_CMD_MAX]              = { .len = -1, .name = "MAX" },
 };
 
@@ -956,6 +958,19 @@ void qemu_savevm_send_postcopy_run(QEMUFile *f)
     qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_RUN, 0, NULL);
 }
 
+void qemu_savevm_send_recv_bitmap(QEMUFile *f, char *block_name)
+{
+    size_t len;
+    char buf[256];
+
+    trace_savevm_send_recv_bitmap(block_name);
+
+    buf[0] = len = strlen(block_name);
+    memcpy(buf + 1, block_name, len);
+
+    qemu_savevm_command_send(f, MIG_CMD_RECV_BITMAP, len + 1, (uint8_t *)buf);
+}
+
 bool qemu_savevm_state_blocked(Error **errp)
 {
     SaveStateEntry *se;
@@ -1801,6 +1816,49 @@ static int loadvm_handle_cmd_packaged(MigrationIncomingState *mis)
     return ret;
 }
 
+/*
+ * Handle request that source requests for recved_bitmap on
+ * destination. Payload format:
+ *
+ * len (1 byte) + ramblock_name (<255 bytes)
+ */
+static int loadvm_handle_recv_bitmap(MigrationIncomingState *mis,
+                                     uint16_t len)
+{
+    QEMUFile *file = mis->from_src_file;
+    RAMBlock *rb;
+    char block_name[256];
+    size_t cnt;
+
+    cnt = qemu_get_counted_string(file, block_name);
+    if (!cnt) {
+        error_report("%s: failed to read block name", __func__);
+        return -EINVAL;
+    }
+
+    /* Validate before using the data */
+    if (qemu_file_get_error(file)) {
+        return qemu_file_get_error(file);
+    }
+
+    if (len != cnt + 1) {
+        error_report("%s: invalid payload length (%d)", __func__, len);
+        return -EINVAL;
+    }
+
+    rb = qemu_ram_block_by_name(block_name);
+    if (!rb) {
+        error_report("%s: block '%s' not found", __func__, block_name);
+        return -EINVAL;
+    }
+
+    /* TODO: send the bitmap back to source */
+
+    trace_loadvm_handle_recv_bitmap(block_name);
+
+    return 0;
+}
+
 /*
  * Process an incoming 'QEMU_VM_COMMAND'
  * 0           just a normal return
@@ -1874,6 +1932,9 @@ static int loadvm_process_command(QEMUFile *f)
 
     case MIG_CMD_POSTCOPY_RAM_DISCARD:
         return loadvm_postcopy_ram_handle_discard(mis, len);
+
+    case MIG_CMD_RECV_BITMAP:
+        return loadvm_handle_recv_bitmap(mis, len);
     }
 
     return 0;
diff --git a/migration/trace-events b/migration/trace-events
index 7f836499d1..5bee6d525a 100644
--- a/migration/trace-events
+++ b/migration/trace-events
@@ -12,6 +12,7 @@ loadvm_state_cleanup(void) ""
 loadvm_handle_cmd_packaged(unsigned int length) "%u"
 loadvm_handle_cmd_packaged_main(int ret) "%d"
 loadvm_handle_cmd_packaged_received(int ret) "%d"
+loadvm_handle_recv_bitmap(char *s) "%s"
 loadvm_postcopy_handle_advise(void) ""
 loadvm_postcopy_handle_listen(void) ""
 loadvm_postcopy_handle_run(void) ""
@@ -34,6 +35,7 @@ savevm_send_open_return_path(void) ""
 savevm_send_ping(uint32_t val) "0x%x"
 savevm_send_postcopy_listen(void) ""
 savevm_send_postcopy_run(void) ""
+savevm_send_recv_bitmap(char *name) "%s"
 savevm_state_setup(void) ""
 savevm_state_header(void) ""
 savevm_state_iterate(void) ""
-- 
2.14.3

  parent reply	other threads:[~2018-05-02 10:48 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-02 10:47 [Qemu-devel] [PATCH v8 00/24] Migration: postcopy failure recovery Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 01/24] migration: let incoming side use thread context Peter Xu
2018-05-08 14:36   ` Juan Quintela
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 02/24] migration: new postcopy-pause state Peter Xu
2018-05-08 15:16   ` Juan Quintela
2018-05-09  4:05     ` Peter Xu
2018-05-09  6:59       ` Juan Quintela
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 03/24] migration: implement "postcopy-pause" src logic Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 04/24] migration: allow dst vm pause on postcopy Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 05/24] migration: allow src return path to pause Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 06/24] migration: allow fault thread " Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 07/24] qmp: hmp: add migrate "resume" option Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 08/24] migration: rebuild channel on source Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 09/24] migration: new state "postcopy-recover" Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 10/24] migration: wakeup dst ram-load-thread for recover Peter Xu
2018-05-02 10:47 ` Peter Xu [this message]
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 12/24] migration: new message MIG_RP_MSG_RECV_BITMAP Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 13/24] migration: new cmd MIG_CMD_POSTCOPY_RESUME Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 14/24] migration: new message MIG_RP_MSG_RESUME_ACK Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 15/24] migration: introduce SaveVMHandlers.resume_prepare Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 16/24] migration: synchronize dirty bitmap for resume Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 17/24] migration: setup ramstate " Peter Xu
2018-05-08 10:54   ` Dr. David Alan Gilbert
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 18/24] migration: final handshake for the resume Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 19/24] migration: init dst in migration_object_init too Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 20/24] qmp/migration: new command migrate-recover Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 21/24] hmp/migration: add migrate_recover command Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 22/24] migration: introduce lock for to_dst_file Peter Xu
2018-05-08 11:31   ` Dr. David Alan Gilbert
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 23/24] migration/qmp: add command migrate-pause Peter Xu
2018-05-08 13:20   ` Dr. David Alan Gilbert
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 24/24] migration/hmp: add migrate_pause command Peter Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180502104740.12123-12-peterx@redhat.com \
    --to=peterx@redhat.com \
    --cc=a.perevalov@samsung.com \
    --cc=aarcange@redhat.com \
    --cc=berrange@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).