From: Peter Xu <peterx@redhat.com>
To: qemu-devel@nongnu.org
Cc: Alexey Perevalov <a.perevalov@samsung.com>,
"Daniel P . Berrange" <berrange@redhat.com>,
Juan Quintela <quintela@redhat.com>,
Andrea Arcangeli <aarcange@redhat.com>,
"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
peterx@redhat.com
Subject: [Qemu-devel] [PATCH v8 14/24] migration: new message MIG_RP_MSG_RESUME_ACK
Date: Wed, 2 May 2018 18:47:30 +0800 [thread overview]
Message-ID: <20180502104740.12123-15-peterx@redhat.com> (raw)
In-Reply-To: <20180502104740.12123-1-peterx@redhat.com>
Creating new message to reply for MIG_CMD_POSTCOPY_RESUME. One uint32_t
is used as payload to let the source know whether destination is ready
to continue the migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
---
migration/migration.h | 3 +++
migration/migration.c | 37 +++++++++++++++++++++++++++++++++++++
migration/savevm.c | 3 ++-
migration/trace-events | 1 +
4 files changed, 43 insertions(+), 1 deletion(-)
diff --git a/migration/migration.h b/migration/migration.h
index b5f89da402..e8f0afb8eb 100644
--- a/migration/migration.h
+++ b/migration/migration.h
@@ -24,6 +24,8 @@
struct PostcopyBlocktimeContext;
+#define MIGRATION_RESUME_ACK_VALUE (1)
+
/* State for the incoming migration */
struct MigrationIncomingState {
QEMUFile *from_src_file;
@@ -261,6 +263,7 @@ int migrate_send_rp_req_pages(MigrationIncomingState *mis, const char* rbname,
ram_addr_t start, size_t len);
void migrate_send_rp_recv_bitmap(MigrationIncomingState *mis,
char *block_name);
+void migrate_send_rp_resume_ack(MigrationIncomingState *mis, uint32_t value);
void dirty_bitmap_mig_before_vm_start(void);
void init_dirty_bitmap_incoming_migration(void);
diff --git a/migration/migration.c b/migration/migration.c
index 4276d18130..ac1780e8f0 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -96,6 +96,7 @@ enum mig_rp_message_type {
MIG_RP_MSG_REQ_PAGES_ID, /* data (start: be64, len: be32, id: string) */
MIG_RP_MSG_REQ_PAGES, /* data (start: be64, len: be32) */
MIG_RP_MSG_RECV_BITMAP, /* send recved_bitmap back to source */
+ MIG_RP_MSG_RESUME_ACK, /* tell source that we are ready to resume */
MIG_RP_MSG_MAX
};
@@ -559,6 +560,14 @@ void migrate_send_rp_recv_bitmap(MigrationIncomingState *mis,
trace_migrate_send_rp_recv_bitmap(block_name, res);
}
+void migrate_send_rp_resume_ack(MigrationIncomingState *mis, uint32_t value)
+{
+ uint32_t buf;
+
+ buf = cpu_to_be32(value);
+ migrate_send_rp_message(mis, MIG_RP_MSG_RESUME_ACK, sizeof(buf), &buf);
+}
+
MigrationCapabilityStatusList *qmp_query_migrate_capabilities(Error **errp)
{
MigrationCapabilityStatusList *head = NULL;
@@ -1838,6 +1847,7 @@ static struct rp_cmd_args {
[MIG_RP_MSG_REQ_PAGES] = { .len = 12, .name = "REQ_PAGES" },
[MIG_RP_MSG_REQ_PAGES_ID] = { .len = -1, .name = "REQ_PAGES_ID" },
[MIG_RP_MSG_RECV_BITMAP] = { .len = -1, .name = "RECV_BITMAP" },
+ [MIG_RP_MSG_RESUME_ACK] = { .len = 4, .name = "RESUME_ACK" },
[MIG_RP_MSG_MAX] = { .len = -1, .name = "MAX" },
};
@@ -1895,6 +1905,25 @@ static int migrate_handle_rp_recv_bitmap(MigrationState *s, char *block_name)
return ram_dirty_bitmap_reload(s, block);
}
+static int migrate_handle_rp_resume_ack(MigrationState *s, uint32_t value)
+{
+ trace_source_return_path_thread_resume_ack(value);
+
+ if (value != MIGRATION_RESUME_ACK_VALUE) {
+ error_report("%s: illegal resume_ack value %"PRIu32,
+ __func__, value);
+ return -1;
+ }
+
+ /* Now both sides are active. */
+ migrate_set_state(&s->state, MIGRATION_STATUS_POSTCOPY_RECOVER,
+ MIGRATION_STATUS_POSTCOPY_ACTIVE);
+
+ /* TODO: notify send thread that time to continue send pages */
+
+ return 0;
+}
+
/*
* Handles messages sent on the return path towards the source VM
*
@@ -2014,6 +2043,14 @@ retry:
}
break;
+ case MIG_RP_MSG_RESUME_ACK:
+ tmp32 = ldl_be_p(buf);
+ if (migrate_handle_rp_resume_ack(ms, tmp32)) {
+ mark_source_rp_bad(ms);
+ goto out;
+ }
+ break;
+
default:
break;
}
diff --git a/migration/savevm.c b/migration/savevm.c
index a7e793eef7..6a2d77cbf3 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -1795,7 +1795,8 @@ static int loadvm_postcopy_handle_resume(MigrationIncomingState *mis)
trace_loadvm_postcopy_handle_resume();
- /* TODO: Tell source that "we are ready" */
+ /* Tell source that "we are ready" */
+ migrate_send_rp_resume_ack(mis, MIGRATION_RESUME_ACK_VALUE);
return 0;
}
diff --git a/migration/trace-events b/migration/trace-events
index 29cc10f299..40a7217829 100644
--- a/migration/trace-events
+++ b/migration/trace-events
@@ -120,6 +120,7 @@ source_return_path_thread_entry(void) ""
source_return_path_thread_loop_top(void) ""
source_return_path_thread_pong(uint32_t val) "0x%x"
source_return_path_thread_shut(uint32_t val) "0x%x"
+source_return_path_thread_resume_ack(uint32_t v) "%"PRIu32
migrate_global_state_post_load(const char *state) "loaded state: %s"
migrate_global_state_pre_save(const char *state) "saved state: %s"
migration_thread_low_pending(uint64_t pending) "%" PRIu64
--
2.14.3
next prev parent reply other threads:[~2018-05-02 10:48 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-02 10:47 [Qemu-devel] [PATCH v8 00/24] Migration: postcopy failure recovery Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 01/24] migration: let incoming side use thread context Peter Xu
2018-05-08 14:36 ` Juan Quintela
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 02/24] migration: new postcopy-pause state Peter Xu
2018-05-08 15:16 ` Juan Quintela
2018-05-09 4:05 ` Peter Xu
2018-05-09 6:59 ` Juan Quintela
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 03/24] migration: implement "postcopy-pause" src logic Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 04/24] migration: allow dst vm pause on postcopy Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 05/24] migration: allow src return path to pause Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 06/24] migration: allow fault thread " Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 07/24] qmp: hmp: add migrate "resume" option Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 08/24] migration: rebuild channel on source Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 09/24] migration: new state "postcopy-recover" Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 10/24] migration: wakeup dst ram-load-thread for recover Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 11/24] migration: new cmd MIG_CMD_RECV_BITMAP Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 12/24] migration: new message MIG_RP_MSG_RECV_BITMAP Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 13/24] migration: new cmd MIG_CMD_POSTCOPY_RESUME Peter Xu
2018-05-02 10:47 ` Peter Xu [this message]
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 15/24] migration: introduce SaveVMHandlers.resume_prepare Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 16/24] migration: synchronize dirty bitmap for resume Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 17/24] migration: setup ramstate " Peter Xu
2018-05-08 10:54 ` Dr. David Alan Gilbert
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 18/24] migration: final handshake for the resume Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 19/24] migration: init dst in migration_object_init too Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 20/24] qmp/migration: new command migrate-recover Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 21/24] hmp/migration: add migrate_recover command Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 22/24] migration: introduce lock for to_dst_file Peter Xu
2018-05-08 11:31 ` Dr. David Alan Gilbert
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 23/24] migration/qmp: add command migrate-pause Peter Xu
2018-05-08 13:20 ` Dr. David Alan Gilbert
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 24/24] migration/hmp: add migrate_pause command Peter Xu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180502104740.12123-15-peterx@redhat.com \
--to=peterx@redhat.com \
--cc=a.perevalov@samsung.com \
--cc=aarcange@redhat.com \
--cc=berrange@redhat.com \
--cc=dgilbert@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).