qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Peter Xu <peterx@redhat.com>
To: qemu-devel@nongnu.org
Cc: Alexey Perevalov <a.perevalov@samsung.com>,
	"Daniel P . Berrange" <berrange@redhat.com>,
	Juan Quintela <quintela@redhat.com>,
	Andrea Arcangeli <aarcange@redhat.com>,
	"Dr . David Alan Gilbert" <dgilbert@redhat.com>,
	peterx@redhat.com
Subject: [Qemu-devel] [PATCH v8 22/24] migration: introduce lock for to_dst_file
Date: Wed,  2 May 2018 18:47:38 +0800	[thread overview]
Message-ID: <20180502104740.12123-23-peterx@redhat.com> (raw)
In-Reply-To: <20180502104740.12123-1-peterx@redhat.com>

Let's introduce a lock for that QEMUFile since we are going to operate
on it in multiple threads.

Signed-off-by: Peter Xu <peterx@redhat.com>
---
 migration/migration.h |  6 ++++++
 migration/channel.c   |  3 ++-
 migration/migration.c | 22 +++++++++++++++++++---
 3 files changed, 27 insertions(+), 4 deletions(-)

diff --git a/migration/migration.h b/migration/migration.h
index 012bcd352b..f6b9e774f9 100644
--- a/migration/migration.h
+++ b/migration/migration.h
@@ -114,6 +114,12 @@ struct MigrationState
     QemuThread thread;
     QEMUBH *cleanup_bh;
     QEMUFile *to_dst_file;
+    /*
+     * Protects to_dst_file pointer.  We need to make sure we won't
+     * yield or hang during the critical section, since this lock will
+     * be used in OOB command handler.
+     */
+    QemuMutex qemu_file_lock;
 
     /* bytes already send at the beggining of current interation */
     uint64_t iteration_initial_bytes;
diff --git a/migration/channel.c b/migration/channel.c
index c5eaf0fa0e..716192bf75 100644
--- a/migration/channel.c
+++ b/migration/channel.c
@@ -74,8 +74,9 @@ void migration_channel_connect(MigrationState *s,
         } else {
             QEMUFile *f = qemu_fopen_channel_output(ioc);
 
+            qemu_mutex_lock(&s->qemu_file_lock);
             s->to_dst_file = f;
-
+            qemu_mutex_unlock(&s->qemu_file_lock);
         }
     }
     migrate_fd_connect(s, error);
diff --git a/migration/migration.c b/migration/migration.c
index 03d1fc7bc3..25f26052d2 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -1229,6 +1229,7 @@ static void migrate_fd_cleanup(void *opaque)
 
     if (s->to_dst_file) {
         Error *local_err = NULL;
+        QEMUFile *tmp;
 
         trace_migrate_fd_cleanup();
         qemu_mutex_unlock_iothread();
@@ -1241,8 +1242,15 @@ static void migrate_fd_cleanup(void *opaque)
         if (multifd_save_cleanup(&local_err) != 0) {
             error_report_err(local_err);
         }
-        qemu_fclose(s->to_dst_file);
+        qemu_mutex_lock(&s->qemu_file_lock);
+        tmp = s->to_dst_file;
         s->to_dst_file = NULL;
+        qemu_mutex_unlock(&s->qemu_file_lock);
+        /*
+         * Close the file handle without the lock to make sure the
+         * critical section won't block for long.
+         */
+        qemu_fclose(tmp);
     }
 
     assert((s->state != MIGRATION_STATUS_ACTIVE) &&
@@ -2526,14 +2534,20 @@ static MigThrError postcopy_pause(MigrationState *s)
     assert(s->state == MIGRATION_STATUS_POSTCOPY_ACTIVE);
 
     while (true) {
+        QEMUFile *file;
+
         migrate_set_state(&s->state, s->state,
                           MIGRATION_STATUS_POSTCOPY_PAUSED);
 
         /* Current channel is possibly broken. Release it. */
         assert(s->to_dst_file);
-        qemu_file_shutdown(s->to_dst_file);
-        qemu_fclose(s->to_dst_file);
+        qemu_mutex_lock(&s->qemu_file_lock);
+        file = s->to_dst_file;
         s->to_dst_file = NULL;
+        qemu_mutex_unlock(&s->qemu_file_lock);
+
+        qemu_file_shutdown(file);
+        qemu_fclose(file);
 
         error_report("Detected IO failure for postcopy. "
                      "Migration paused.");
@@ -3002,6 +3016,7 @@ static void migration_instance_finalize(Object *obj)
     MigrationParameters *params = &ms->parameters;
 
     qemu_mutex_destroy(&ms->error_mutex);
+    qemu_mutex_destroy(&ms->qemu_file_lock);
     g_free(params->tls_hostname);
     g_free(params->tls_creds);
     qemu_sem_destroy(&ms->pause_sem);
@@ -3041,6 +3056,7 @@ static void migration_instance_init(Object *obj)
     qemu_sem_init(&ms->postcopy_pause_sem, 0);
     qemu_sem_init(&ms->postcopy_pause_rp_sem, 0);
     qemu_sem_init(&ms->rp_state.rp_sem, 0);
+    qemu_mutex_init(&ms->qemu_file_lock);
 }
 
 /*
-- 
2.14.3

  parent reply	other threads:[~2018-05-02 10:49 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-02 10:47 [Qemu-devel] [PATCH v8 00/24] Migration: postcopy failure recovery Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 01/24] migration: let incoming side use thread context Peter Xu
2018-05-08 14:36   ` Juan Quintela
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 02/24] migration: new postcopy-pause state Peter Xu
2018-05-08 15:16   ` Juan Quintela
2018-05-09  4:05     ` Peter Xu
2018-05-09  6:59       ` Juan Quintela
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 03/24] migration: implement "postcopy-pause" src logic Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 04/24] migration: allow dst vm pause on postcopy Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 05/24] migration: allow src return path to pause Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 06/24] migration: allow fault thread " Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 07/24] qmp: hmp: add migrate "resume" option Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 08/24] migration: rebuild channel on source Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 09/24] migration: new state "postcopy-recover" Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 10/24] migration: wakeup dst ram-load-thread for recover Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 11/24] migration: new cmd MIG_CMD_RECV_BITMAP Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 12/24] migration: new message MIG_RP_MSG_RECV_BITMAP Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 13/24] migration: new cmd MIG_CMD_POSTCOPY_RESUME Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 14/24] migration: new message MIG_RP_MSG_RESUME_ACK Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 15/24] migration: introduce SaveVMHandlers.resume_prepare Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 16/24] migration: synchronize dirty bitmap for resume Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 17/24] migration: setup ramstate " Peter Xu
2018-05-08 10:54   ` Dr. David Alan Gilbert
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 18/24] migration: final handshake for the resume Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 19/24] migration: init dst in migration_object_init too Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 20/24] qmp/migration: new command migrate-recover Peter Xu
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 21/24] hmp/migration: add migrate_recover command Peter Xu
2018-05-02 10:47 ` Peter Xu [this message]
2018-05-08 11:31   ` [Qemu-devel] [PATCH v8 22/24] migration: introduce lock for to_dst_file Dr. David Alan Gilbert
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 23/24] migration/qmp: add command migrate-pause Peter Xu
2018-05-08 13:20   ` Dr. David Alan Gilbert
2018-05-02 10:47 ` [Qemu-devel] [PATCH v8 24/24] migration/hmp: add migrate_pause command Peter Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180502104740.12123-23-peterx@redhat.com \
    --to=peterx@redhat.com \
    --cc=a.perevalov@samsung.com \
    --cc=aarcange@redhat.com \
    --cc=berrange@redhat.com \
    --cc=dgilbert@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=quintela@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).