From: Juan Quintela <quintela@redhat.com>
To: qemu-devel@nongnu.org
Cc: dgilbert@redhat.com, lvivier@redhat.com, peterx@redhat.com
Subject: [Qemu-devel] [PULL 24/41] migration: new cmd MIG_CMD_RECV_BITMAP
Date: Wed, 9 May 2018 13:23:49 +0200 [thread overview]
Message-ID: <20180509112406.6183-25-quintela@redhat.com> (raw)
In-Reply-To: <20180509112406.6183-1-quintela@redhat.com>
From: Peter Xu <peterx@redhat.com>
Add a new vm command MIG_CMD_RECV_BITMAP to request received bitmap for
one ramblock.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180502104740.12123-12-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
---
migration/savevm.c | 61 ++++++++++++++++++++++++++++++++++++++++++
migration/savevm.h | 1 +
migration/trace-events | 2 ++
3 files changed, 64 insertions(+)
diff --git a/migration/savevm.c b/migration/savevm.c
index 6ee69d8283..9f4a95d411 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -81,6 +81,7 @@ enum qemu_vm_cmd {
were previously sent during
precopy but are dirty. */
MIG_CMD_PACKAGED, /* Send a wrapped stream within this stream */
+ MIG_CMD_RECV_BITMAP, /* Request for recved bitmap on dst */
MIG_CMD_MAX
};
@@ -98,6 +99,7 @@ static struct mig_cmd_args {
[MIG_CMD_POSTCOPY_RAM_DISCARD] = {
.len = -1, .name = "POSTCOPY_RAM_DISCARD" },
[MIG_CMD_PACKAGED] = { .len = 4, .name = "PACKAGED" },
+ [MIG_CMD_RECV_BITMAP] = { .len = -1, .name = "RECV_BITMAP" },
[MIG_CMD_MAX] = { .len = -1, .name = "MAX" },
};
@@ -956,6 +958,19 @@ void qemu_savevm_send_postcopy_run(QEMUFile *f)
qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_RUN, 0, NULL);
}
+void qemu_savevm_send_recv_bitmap(QEMUFile *f, char *block_name)
+{
+ size_t len;
+ char buf[256];
+
+ trace_savevm_send_recv_bitmap(block_name);
+
+ buf[0] = len = strlen(block_name);
+ memcpy(buf + 1, block_name, len);
+
+ qemu_savevm_command_send(f, MIG_CMD_RECV_BITMAP, len + 1, (uint8_t *)buf);
+}
+
bool qemu_savevm_state_blocked(Error **errp)
{
SaveStateEntry *se;
@@ -1801,6 +1816,49 @@ static int loadvm_handle_cmd_packaged(MigrationIncomingState *mis)
return ret;
}
+/*
+ * Handle request that source requests for recved_bitmap on
+ * destination. Payload format:
+ *
+ * len (1 byte) + ramblock_name (<255 bytes)
+ */
+static int loadvm_handle_recv_bitmap(MigrationIncomingState *mis,
+ uint16_t len)
+{
+ QEMUFile *file = mis->from_src_file;
+ RAMBlock *rb;
+ char block_name[256];
+ size_t cnt;
+
+ cnt = qemu_get_counted_string(file, block_name);
+ if (!cnt) {
+ error_report("%s: failed to read block name", __func__);
+ return -EINVAL;
+ }
+
+ /* Validate before using the data */
+ if (qemu_file_get_error(file)) {
+ return qemu_file_get_error(file);
+ }
+
+ if (len != cnt + 1) {
+ error_report("%s: invalid payload length (%d)", __func__, len);
+ return -EINVAL;
+ }
+
+ rb = qemu_ram_block_by_name(block_name);
+ if (!rb) {
+ error_report("%s: block '%s' not found", __func__, block_name);
+ return -EINVAL;
+ }
+
+ /* TODO: send the bitmap back to source */
+
+ trace_loadvm_handle_recv_bitmap(block_name);
+
+ return 0;
+}
+
/*
* Process an incoming 'QEMU_VM_COMMAND'
* 0 just a normal return
@@ -1874,6 +1932,9 @@ static int loadvm_process_command(QEMUFile *f)
case MIG_CMD_POSTCOPY_RAM_DISCARD:
return loadvm_postcopy_ram_handle_discard(mis, len);
+
+ case MIG_CMD_RECV_BITMAP:
+ return loadvm_handle_recv_bitmap(mis, len);
}
return 0;
diff --git a/migration/savevm.h b/migration/savevm.h
index cf4f0d37ca..b8cee00d41 100644
--- a/migration/savevm.h
+++ b/migration/savevm.h
@@ -47,6 +47,7 @@ int qemu_savevm_send_packaged(QEMUFile *f, const uint8_t *buf, size_t len);
void qemu_savevm_send_postcopy_advise(QEMUFile *f);
void qemu_savevm_send_postcopy_listen(QEMUFile *f);
void qemu_savevm_send_postcopy_run(QEMUFile *f);
+void qemu_savevm_send_recv_bitmap(QEMUFile *f, char *block_name);
void qemu_savevm_send_postcopy_ram_discard(QEMUFile *f, const char *name,
uint16_t len,
diff --git a/migration/trace-events b/migration/trace-events
index 7f836499d1..5bee6d525a 100644
--- a/migration/trace-events
+++ b/migration/trace-events
@@ -12,6 +12,7 @@ loadvm_state_cleanup(void) ""
loadvm_handle_cmd_packaged(unsigned int length) "%u"
loadvm_handle_cmd_packaged_main(int ret) "%d"
loadvm_handle_cmd_packaged_received(int ret) "%d"
+loadvm_handle_recv_bitmap(char *s) "%s"
loadvm_postcopy_handle_advise(void) ""
loadvm_postcopy_handle_listen(void) ""
loadvm_postcopy_handle_run(void) ""
@@ -34,6 +35,7 @@ savevm_send_open_return_path(void) ""
savevm_send_ping(uint32_t val) "0x%x"
savevm_send_postcopy_listen(void) ""
savevm_send_postcopy_run(void) ""
+savevm_send_recv_bitmap(char *name) "%s"
savevm_state_setup(void) ""
savevm_state_header(void) ""
savevm_state_iterate(void) ""
--
2.17.0
next prev parent reply other threads:[~2018-05-09 11:24 UTC|newest]
Thread overview: 51+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-09 11:23 [Qemu-devel] [PULL 00/41] Migration queue Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 01/41] migration: fix saving normal page even if it's been compressed Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 02/41] tests: Add migration precopy test Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 03/41] tests: Add migration xbzrle test Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 04/41] tests: Migration ppc now inlines its program Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 05/41] migration: Set error state in case of error Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 06/41] migration: Introduce multifd_recv_new_channel() Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 07/41] migration: terminate_* can be called for other threads Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 08/41] migration: Be sure all recv channels are created Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 09/41] migration: Export functions to create send channels Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 10/41] migration: Create multifd channels Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 11/41] migration: Delay start of migration main routines Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 12/41] migration: Transmit initial package through the multifd channels Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 13/41] migration: Define MultifdRecvParams sooner Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 14/41] migration: let incoming side use thread context Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 15/41] migration: new postcopy-pause state Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 16/41] migration: implement "postcopy-pause" src logic Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 17/41] migration: allow dst vm pause on postcopy Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 18/41] migration: allow src return path to pause Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 19/41] migration: allow fault thread " Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 20/41] qmp: hmp: add migrate "resume" option Juan Quintela
2018-05-09 12:57 ` Eric Blake
2018-05-09 11:23 ` [Qemu-devel] [PULL 21/41] migration: rebuild channel on source Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 22/41] migration: new state "postcopy-recover" Juan Quintela
2018-05-09 12:57 ` Eric Blake
2018-05-09 11:23 ` [Qemu-devel] [PULL 23/41] migration: wakeup dst ram-load-thread for recover Juan Quintela
2018-05-09 11:23 ` Juan Quintela [this message]
2018-05-09 11:23 ` [Qemu-devel] [PULL 25/41] migration: new message MIG_RP_MSG_RECV_BITMAP Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 26/41] migration: new cmd MIG_CMD_POSTCOPY_RESUME Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 27/41] migration: new message MIG_RP_MSG_RESUME_ACK Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 28/41] migration: introduce SaveVMHandlers.resume_prepare Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 29/41] migration: synchronize dirty bitmap for resume Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 30/41] migration: setup ramstate " Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 31/41] migration: final handshake for the resume Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 32/41] migration: init dst in migration_object_init too Juan Quintela
2018-05-09 11:23 ` [Qemu-devel] [PULL 33/41] qmp/migration: new command migrate-recover Juan Quintela
2018-05-09 12:59 ` Eric Blake
2018-05-09 11:23 ` [Qemu-devel] [PULL 34/41] hmp/migration: add migrate_recover command Juan Quintela
2018-05-09 11:24 ` [Qemu-devel] [PULL 35/41] migration: introduce lock for to_dst_file Juan Quintela
2018-05-09 11:24 ` [Qemu-devel] [PULL 36/41] migration/qmp: add command migrate-pause Juan Quintela
2018-05-09 12:59 ` Eric Blake
2018-05-09 11:24 ` [Qemu-devel] [PULL 37/41] migration/hmp: add migrate_pause command Juan Quintela
2018-05-09 11:24 ` [Qemu-devel] [PULL 38/41] migration: update docs Juan Quintela
2018-05-09 11:24 ` [Qemu-devel] [PULL 39/41] migration: update index field when delete or qsort RDMALocalBlock Juan Quintela
2018-05-09 11:24 ` [Qemu-devel] [PULL 40/41] migration: Textual fixups for blocktime Juan Quintela
2018-05-09 11:24 ` [Qemu-devel] [PULL 41/41] Migration+TLS: Fix crash due to double cleanup Juan Quintela
2018-05-11 13:41 ` [Qemu-devel] [PULL 00/41] Migration queue Peter Maydell
2018-05-11 14:20 ` Dr. David Alan Gilbert
2018-05-11 14:22 ` Peter Maydell
2018-05-18 10:19 ` Peter Maydell
2018-05-18 10:22 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180509112406.6183-25-quintela@redhat.com \
--to=quintela@redhat.com \
--cc=dgilbert@redhat.com \
--cc=lvivier@redhat.com \
--cc=peterx@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).