From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 09/21] target/arm: Use new min/max expanders
Date: Thu, 10 May 2018 18:45:07 +0100 [thread overview]
Message-ID: <20180510174519.11264-10-peter.maydell@linaro.org> (raw)
In-Reply-To: <20180510174519.11264-1-peter.maydell@linaro.org>
From: Richard Henderson <richard.henderson@linaro.org>
The generic expanders replace nearly identical code in the translator.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180508151437.4232-3-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/translate-a64.c | 46 ++++++++++++--------------------------
1 file changed, 14 insertions(+), 32 deletions(-)
diff --git a/target/arm/translate-a64.c b/target/arm/translate-a64.c
index 6d49f30b4a..60d104cc8a 100644
--- a/target/arm/translate-a64.c
+++ b/target/arm/translate-a64.c
@@ -6021,15 +6021,18 @@ static void disas_simd_across_lanes(DisasContext *s, uint32_t insn)
tcg_gen_add_i64(tcg_res, tcg_res, tcg_elt);
break;
case 0x0a: /* SMAXV / UMAXV */
- tcg_gen_movcond_i64(is_u ? TCG_COND_GEU : TCG_COND_GE,
- tcg_res,
- tcg_res, tcg_elt, tcg_res, tcg_elt);
+ if (is_u) {
+ tcg_gen_umax_i64(tcg_res, tcg_res, tcg_elt);
+ } else {
+ tcg_gen_smax_i64(tcg_res, tcg_res, tcg_elt);
+ }
break;
case 0x1a: /* SMINV / UMINV */
- tcg_gen_movcond_i64(is_u ? TCG_COND_LEU : TCG_COND_LE,
- tcg_res,
- tcg_res, tcg_elt, tcg_res, tcg_elt);
- break;
+ if (is_u) {
+ tcg_gen_umin_i64(tcg_res, tcg_res, tcg_elt);
+ } else {
+ tcg_gen_smin_i64(tcg_res, tcg_res, tcg_elt);
+ }
break;
default:
g_assert_not_reached();
@@ -9927,27 +9930,6 @@ static void disas_simd_3same_logic(DisasContext *s, uint32_t insn)
}
}
-/* Helper functions for 32 bit comparisons */
-static void gen_max_s32(TCGv_i32 res, TCGv_i32 op1, TCGv_i32 op2)
-{
- tcg_gen_movcond_i32(TCG_COND_GE, res, op1, op2, op1, op2);
-}
-
-static void gen_max_u32(TCGv_i32 res, TCGv_i32 op1, TCGv_i32 op2)
-{
- tcg_gen_movcond_i32(TCG_COND_GEU, res, op1, op2, op1, op2);
-}
-
-static void gen_min_s32(TCGv_i32 res, TCGv_i32 op1, TCGv_i32 op2)
-{
- tcg_gen_movcond_i32(TCG_COND_LE, res, op1, op2, op1, op2);
-}
-
-static void gen_min_u32(TCGv_i32 res, TCGv_i32 op1, TCGv_i32 op2)
-{
- tcg_gen_movcond_i32(TCG_COND_LEU, res, op1, op2, op1, op2);
-}
-
/* Pairwise op subgroup of C3.6.16.
*
* This is called directly or via the handle_3same_float for float pairwise
@@ -10047,7 +10029,7 @@ static void handle_simd_3same_pair(DisasContext *s, int is_q, int u, int opcode,
static NeonGenTwoOpFn * const fns[3][2] = {
{ gen_helper_neon_pmax_s8, gen_helper_neon_pmax_u8 },
{ gen_helper_neon_pmax_s16, gen_helper_neon_pmax_u16 },
- { gen_max_s32, gen_max_u32 },
+ { tcg_gen_smax_i32, tcg_gen_umax_i32 },
};
genfn = fns[size][u];
break;
@@ -10057,7 +10039,7 @@ static void handle_simd_3same_pair(DisasContext *s, int is_q, int u, int opcode,
static NeonGenTwoOpFn * const fns[3][2] = {
{ gen_helper_neon_pmin_s8, gen_helper_neon_pmin_u8 },
{ gen_helper_neon_pmin_s16, gen_helper_neon_pmin_u16 },
- { gen_min_s32, gen_min_u32 },
+ { tcg_gen_smin_i32, tcg_gen_umin_i32 },
};
genfn = fns[size][u];
break;
@@ -10512,7 +10494,7 @@ static void disas_simd_3same_int(DisasContext *s, uint32_t insn)
static NeonGenTwoOpFn * const fns[3][2] = {
{ gen_helper_neon_max_s8, gen_helper_neon_max_u8 },
{ gen_helper_neon_max_s16, gen_helper_neon_max_u16 },
- { gen_max_s32, gen_max_u32 },
+ { tcg_gen_smax_i32, tcg_gen_umax_i32 },
};
genfn = fns[size][u];
break;
@@ -10523,7 +10505,7 @@ static void disas_simd_3same_int(DisasContext *s, uint32_t insn)
static NeonGenTwoOpFn * const fns[3][2] = {
{ gen_helper_neon_min_s8, gen_helper_neon_min_u8 },
{ gen_helper_neon_min_s16, gen_helper_neon_min_u16 },
- { gen_min_s32, gen_min_u32 },
+ { tcg_gen_smin_i32, tcg_gen_umin_i32 },
};
genfn = fns[size][u];
break;
--
2.17.0
next prev parent reply other threads:[~2018-05-10 17:45 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-10 17:44 [Qemu-devel] [PULL 00/21] target-arm queue Peter Maydell
2018-05-10 17:44 ` [Qemu-devel] [PULL 01/21] hw/arm/iotkit.c: fix minor memory leak Peter Maydell
2018-05-10 17:45 ` [Qemu-devel] [PULL 02/21] softfloat: Handle default NaN mode after pickNaNMulAdd, not before Peter Maydell
2018-05-10 17:45 ` [Qemu-devel] [PULL 03/21] pc: simplify MachineClass::get_hotplug_handler handling Peter Maydell
2018-05-10 17:45 ` [Qemu-devel] [PULL 04/21] platform-bus-device: use device plug callback instead of machine_done notifier Peter Maydell
2018-05-10 17:45 ` [Qemu-devel] [PULL 05/21] arm/boot: split load_dtb() from arm_load_kernel() Peter Maydell
2018-05-23 7:38 ` Auger Eric
2018-05-23 10:25 ` Igor Mammedov
2018-05-10 17:45 ` [Qemu-devel] [PULL 06/21] make sure that we aren't overwriting mc->get_hotplug_handler by accident Peter Maydell
2018-05-10 17:45 ` [Qemu-devel] [PULL 07/21] atomic.h: Work around gcc spurious "unused value" warning Peter Maydell
2018-05-10 17:45 ` [Qemu-devel] [PULL 08/21] tcg: Introduce helpers for integer min/max Peter Maydell
2018-05-10 17:45 ` Peter Maydell [this message]
2018-05-10 17:45 ` [Qemu-devel] [PULL 10/21] target/xtensa: Use new min/max expanders Peter Maydell
2018-05-10 17:45 ` [Qemu-devel] [PULL 11/21] tcg: Introduce atomic helpers for integer min/max Peter Maydell
2018-05-10 17:45 ` [Qemu-devel] [PULL 12/21] tcg: Use GEN_ATOMIC_HELPER_FN for opposite endian atomic add Peter Maydell
2018-05-10 17:45 ` [Qemu-devel] [PULL 13/21] target/riscv: Use new atomic min/max expanders Peter Maydell
2018-05-10 17:45 ` [Qemu-devel] [PULL 14/21] target/arm: Introduce ARM_FEATURE_V8_ATOMICS and initial decode Peter Maydell
2018-05-10 17:45 ` [Qemu-devel] [PULL 15/21] target/arm: Fill in disas_ldst_atomic Peter Maydell
2018-05-10 17:45 ` [Qemu-devel] [PULL 16/21] target/arm: Implement CAS and CASP Peter Maydell
2018-05-10 17:45 ` [Qemu-devel] [PULL 17/21] target/arm: Enable ARM_FEATURE_V8_ATOMICS for user-only Peter Maydell
2018-05-10 17:45 ` [Qemu-devel] [PULL 18/21] target/arm: Implement vector shifted SCVF/UCVF for fp16 Peter Maydell
2018-05-10 17:45 ` [Qemu-devel] [PULL 19/21] target/arm: Implement vector shifted FCVT " Peter Maydell
2018-05-10 17:45 ` [Qemu-devel] [PULL 20/21] target/arm: Fix float16 to/from int16 Peter Maydell
2018-05-10 17:45 ` [Qemu-devel] [PULL 21/21] target/arm: Clear SVE high bits for FMOV Peter Maydell
2018-05-10 18:06 ` [Qemu-devel] [PULL 00/21] target-arm queue no-reply
2018-05-14 8:46 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180510174519.11264-10-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).