qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Laurent Vivier <laurent@vivier.eu>
To: qemu-devel@nongnu.org
Cc: Yongbok Kim <yongbok.kim@mips.com>,
	Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>,
	Riku Voipio <riku.voipio@iki.fi>,
	Richard Henderson <rth@twiddle.net>,
	Laurent Vivier <laurent@vivier.eu>
Subject: [Qemu-devel] [PATCH 5/5] linux-user: copy sparc/sockbits.h definitions from linux
Date: Fri, 11 May 2018 00:26:01 +0200	[thread overview]
Message-ID: <20180510222601.19944-6-laurent@vivier.eu> (raw)
In-Reply-To: <20180510222601.19944-1-laurent@vivier.eu>

Values defined for sparc are not correct.
Copy the content of "arch/sparc/include/uapi/asm/socket.h"
to fix them.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
---
 linux-user/sparc/sockbits.h | 161 ++++++++++++++++++++++++--------------------
 1 file changed, 89 insertions(+), 72 deletions(-)

diff --git a/linux-user/sparc/sockbits.h b/linux-user/sparc/sockbits.h
index 385061c8b0..0a822e3e1f 100644
--- a/linux-user/sparc/sockbits.h
+++ b/linux-user/sparc/sockbits.h
@@ -8,87 +8,104 @@
 #ifndef SPARC_SOCKBITS_H
 #define SPARC_SOCKBITS_H
 
-/** sock_type - Socket types
- *
- * Please notice that for binary compat reasons SPARC has to
- * override the enum sock_type in include/linux/net.h, so
- * we define ARCH_HAS_SOCKET_TYPES here.
- *
- * @SOCK_DGRAM - datagram (conn.less) socket
- * @SOCK_STREAM - stream (connection) socket
- * @SOCK_RAW - raw socket
- * @SOCK_RDM - reliably-delivered message
- * @SOCK_SEQPACKET - sequential packet socket
- * @SOCK_DCCP - Datagram Congestion Control Protocol socket
- * @SOCK_PACKET - linux specific way of getting packets at the dev level.
- *                For writing rarp and other similar things on the user
- *                level.
- * @SOCK_CLOEXEC - sets the close-on-exec (FD_CLOEXEC) flag.
- * @SOCK_NONBLOCK - sets the O_NONBLOCK file status flag.
- */
+/* For setsockopt(2) */
+#define TARGET_SOL_SOCKET      0xffff
 
-#define ARCH_HAS_SOCKET_TYPES          1
+#define TARGET_SO_DEBUG        0x0001
+#define TARGET_SO_PASSCRED     0x0002
+#define TARGET_SO_REUSEADDR    0x0004
+#define TARGET_SO_KEEPALIVE    0x0008
+#define TARGET_SO_DONTROUTE    0x0010
+#define TARGET_SO_BROADCAST    0x0020
+#define TARGET_SO_PEERCRED     0x0040
+#define TARGET_SO_LINGER       0x0080
+#define TARGET_SO_OOBINLINE    0x0100
+#define TARGET_SO_REUSEPORT    0x0200
+#define TARGET_SO_BSDCOMPAT    0x0400
+#define TARGET_SO_RCVLOWAT     0x0800
+#define TARGET_SO_SNDLOWAT     0x1000
+#define TARGET_SO_RCVTIMEO     0x2000
+#define TARGET_SO_SNDTIMEO     0x4000
+#define TARGET_SO_ACCEPTCONN   0x8000
 
-enum sock_type {
-       TARGET_SOCK_STREAM      = 1,
-       TARGET_SOCK_DGRAM       = 2,
-       TARGET_SOCK_RAW         = 3,
-       TARGET_SOCK_RDM         = 4,
-       TARGET_SOCK_SEQPACKET   = 5,
-       TARGET_SOCK_DCCP        = 6,
-       TARGET_SOCK_PACKET      = 10,
-       TARGET_SOCK_CLOEXEC     = 020000000,
-       TARGET_SOCK_NONBLOCK    = 040000,
-};
+#define TARGET_SO_SNDBUF       0x1001
+#define TARGET_SO_RCVBUF       0x1002
+#define TARGET_SO_SNDBUFFORCE  0x100a
+#define TARGET_SO_RCVBUFFORCE  0x100b
+#define TARGET_SO_ERROR        0x1007
+#define TARGET_SO_TYPE         0x1008
+#define TARGET_SO_PROTOCOL     0x1028
+#define TARGET_SO_DOMAIN       0x1029
 
-#define TARGET_SOCK_MAX (TARGET_SOCK_PACKET + 1)
-#define TARGET_SOCK_TYPE_MASK    0xf  /* Covers up to TARGET_SOCK_MAX-1. */
+/* Linux specific, keep the same. */
+#define TARGET_SO_NO_CHECK     0x000b
+#define TARGET_SO_PRIORITY     0x000c
 
-#define TARGET_SO_PASSSEC        31
+#define TARGET_SO_BINDTODEVICE 0x000d
 
-/* For setsockopt(2) */
-#define TARGET_SOL_SOCKET      1
-
-#define TARGET_SO_DEBUG        1
-#define TARGET_SO_REUSEADDR    2
-#define TARGET_SO_TYPE         3
-#define TARGET_SO_ERROR        4
-#define TARGET_SO_DONTROUTE    5
-#define TARGET_SO_BROADCAST    6
-#define TARGET_SO_SNDBUF       7
-#define TARGET_SO_RCVBUF       8
-#define TARGET_SO_SNDBUFFORCE  32
-#define TARGET_SO_RCVBUFFORCE  33
-#define TARGET_SO_KEEPALIVE    9
-#define TARGET_SO_OOBINLINE    10
-#define TARGET_SO_NO_CHECK     11
-#define TARGET_SO_PRIORITY     12
-#define TARGET_SO_LINGER       13
-#define TARGET_SO_BSDCOMPAT    14
-/* To add :#define TARGET_SO_REUSEPORT 15 */
-#define TARGET_SO_PASSCRED     16
-#define TARGET_SO_PEERCRED     17
-#define TARGET_SO_RCVLOWAT     18
-#define TARGET_SO_SNDLOWAT     19
-#define TARGET_SO_RCVTIMEO     20
-#define TARGET_SO_SNDTIMEO     21
+#define TARGET_SO_ATTACH_FILTER        0x001a
+#define TARGET_SO_DETACH_FILTER        0x001b
+#define TARGET_SO_GET_FILTER           TARGET_SO_ATTACH_FILTER
 
-/* Security levels - as per NRL IPv6 - don't actually do anything */
-#define TARGET_SO_SECURITY_AUTHENTICATION              22
-#define TARGET_SO_SECURITY_ENCRYPTION_TRANSPORT        23
-#define TARGET_SO_SECURITY_ENCRYPTION_NETWORK          24
+#define TARGET_SO_PEERNAME             0x001c
+#define TARGET_SO_TIMESTAMP            0x001d
+#define TARGET_SCM_TIMESTAMP           TARGET_SO_TIMESTAMP
 
-#define TARGET_SO_BINDTODEVICE 25
+#define TARGET_SO_PEERSEC              0x001e
+#define TARGET_SO_PASSSEC              0x001f
+#define TARGET_SO_TIMESTAMPNS          0x0021
+#define TARGET_SCM_TIMESTAMPNS         TARGET_SO_TIMESTAMPNS
 
-/* Socket filtering */
-#define TARGET_SO_ATTACH_FILTER        26
-#define TARGET_SO_DETACH_FILTER        27
+#define TARGET_SO_MARK                 0x0022
 
-#define TARGET_SO_PEERNAME             28
-#define TARGET_SO_TIMESTAMP            29
-#define TARGET_SCM_TIMESTAMP           TARGET_SO_TIMESTAMP
+#define TARGET_SO_TIMESTAMPING         0x0023
+#define TARGET_SCM_TIMESTAMPING        TARGET_SO_TIMESTAMPING
+
+#define TARGET_SO_RXQ_OVFL             0x0024
+
+#define TARGET_SO_WIFI_STATUS          0x0025
+#define TARGET_SCM_WIFI_STATUS         TARGET_SO_WIFI_STATUS
+#define TARGET_SO_PEEK_OFF             0x0026
+
+/* Instruct lower device to use last 4-bytes of skb data as FCS */
+#define TARGET_SO_NOFCS                0x0027
+
+#define TARGET_SO_LOCK_FILTER          0x0028
+
+#define TARGET_SO_SELECT_ERR_QUEUE     0x0029
+
+#define TARGET_SO_BUSY_POLL            0x0030
+
+#define TARGET_SO_MAX_PACING_RATE      0x0031
 
-#define TARGET_SO_ACCEPTCONN           30
+#define TARGET_SO_BPF_EXTENSIONS       0x0032
 
-#define TARGET_SO_PEERSEC              31
+#define TARGET_SO_INCOMING_CPU         0x0033
+
+#define TARGET_SO_ATTACH_BPF           0x0034
+#define TARGET_SO_DETACH_BPF           TARGET_SO_DETACH_FILTER
+
+#define TARGET_SO_ATTACH_REUSEPORT_CBPF        0x0035
+#define TARGET_SO_ATTACH_REUSEPORT_EBPF        0x0036
+
+#define TARGET_SO_CNX_ADVICE           0x0037
+
+#define TARGET_SCM_TIMESTAMPING_OPT_STATS      0x0038
+
+#define TARGET_SO_MEMINFO              0x0039
+
+#define TARGET_SO_INCOMING_NAPI_ID     0x003a
+
+#define TARGET_SO_COOKIE               0x003b
+
+#define TARGET_SCM_TIMESTAMPING_PKTINFO        0x003c
+
+#define TARGET_SO_PEERGROUPS           0x003d
+
+#define TARGET_SO_ZEROCOPY             0x003e
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define TARGET_SO_SECURITY_AUTHENTICATION              0x5001
+#define TARGET_SO_SECURITY_ENCRYPTION_TRANSPORT        0x5002
+#define TARGET_SO_SECURITY_ENCRYPTION_NETWORK          0x5004
 #endif
-- 
2.14.3

  parent reply	other threads:[~2018-05-10 22:26 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-10 22:25 [Qemu-devel] [PATCH 0/5] linux-user: move socket.h definitions to CPU directories Laurent Vivier
2018-05-10 22:25 ` [Qemu-devel] [PATCH 1/5] linux-user: move mips socket.h definitions to mips/sockbits.h Laurent Vivier
2018-05-11 12:08   ` Peter Maydell
2018-05-10 22:25 ` [Qemu-devel] [PATCH 2/5] linux-user: move alpha socket.h definitions to alpha/sockbits.h Laurent Vivier
2018-05-11 12:09   ` Peter Maydell
2018-05-10 22:25 ` [Qemu-devel] [PATCH 3/5] linux-user: move sparc/sparc64 socket.h definitions to sparc/sockbits.h Laurent Vivier
2018-05-11 12:09   ` Peter Maydell
2018-05-10 22:26 ` [Qemu-devel] [PATCH 4/5] linux-user: move ppc socket.h definitions to ppc/sockbits.h Laurent Vivier
2018-05-11 12:09   ` Peter Maydell
2018-05-11 12:12   ` Peter Maydell
2018-05-11 16:53     ` Laurent Vivier
2018-05-10 22:26 ` Laurent Vivier [this message]
2018-05-11 12:07   ` [Qemu-devel] [PATCH 5/5] linux-user: copy sparc/sockbits.h definitions from linux Peter Maydell
2018-05-10 22:34 ` [Qemu-devel] [PATCH 0/5] linux-user: move socket.h definitions to CPU directories no-reply
2018-05-13  1:41 ` Philippe Mathieu-Daudé

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180510222601.19944-6-laurent@vivier.eu \
    --to=laurent@vivier.eu \
    --cc=mark.cave-ayland@ilande.co.uk \
    --cc=qemu-devel@nongnu.org \
    --cc=riku.voipio@iki.fi \
    --cc=rth@twiddle.net \
    --cc=yongbok.kim@mips.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).