From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org, alex.bennee@linaro.org
Subject: [Qemu-devel] [PATCH v2 27/27] fpu/softfloat: Pass FloatClass to pickNaNMulAdd
Date: Fri, 11 May 2018 17:43:11 -0700 [thread overview]
Message-ID: <20180512004311.9299-28-richard.henderson@linaro.org> (raw)
In-Reply-To: <20180512004311.9299-1-richard.henderson@linaro.org>
For each operand, pass a single enumeration instead of a pair of booleans.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
fpu/softfloat-specialize.h | 70 +++++++++++++++-----------------------
fpu/softfloat.c | 5 +--
2 files changed, 28 insertions(+), 47 deletions(-)
diff --git a/fpu/softfloat-specialize.h b/fpu/softfloat-specialize.h
index 47c67caec6..85c59c20d8 100644
--- a/fpu/softfloat-specialize.h
+++ b/fpu/softfloat-specialize.h
@@ -594,15 +594,14 @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls,
| information.
| Return values : 0 : a; 1 : b; 2 : c; 3 : default-NaN
*----------------------------------------------------------------------------*/
-#if defined(TARGET_ARM)
-static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
- flag cIsQNaN, flag cIsSNaN, flag infzero,
- float_status *status)
+static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls,
+ bool infzero, float_status *status)
{
+#if defined(TARGET_ARM)
/* For ARM, the (inf,zero,qnan) case sets InvalidOp and returns
* the default NaN
*/
- if (infzero && cIsQNaN) {
+ if (infzero && is_qnan(c_cls)) {
float_raise(float_flag_invalid, status);
return 3;
}
@@ -610,25 +609,20 @@ static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
/* This looks different from the ARM ARM pseudocode, because the ARM ARM
* puts the operands to a fused mac operation (a*b)+c in the order c,a,b.
*/
- if (cIsSNaN) {
+ if (is_snan(c_cls)) {
return 2;
- } else if (aIsSNaN) {
+ } else if (is_snan(a_cls)) {
return 0;
- } else if (bIsSNaN) {
+ } else if (is_snan(b_cls)) {
return 1;
- } else if (cIsQNaN) {
+ } else if (is_qnan(c_cls)) {
return 2;
- } else if (aIsQNaN) {
+ } else if (is_qnan(a_cls)) {
return 0;
} else {
return 1;
}
-}
#elif defined(TARGET_MIPS)
-static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
- flag cIsQNaN, flag cIsSNaN, flag infzero,
- float_status *status)
-{
/* For MIPS, the (inf,zero,qnan) case sets InvalidOp and returns
* the default NaN
*/
@@ -639,41 +633,36 @@ static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
if (snan_bit_is_one(status)) {
/* Prefer sNaN over qNaN, in the a, b, c order. */
- if (aIsSNaN) {
+ if (is_snan(a_cls)) {
return 0;
- } else if (bIsSNaN) {
+ } else if (is_snan(b_cls)) {
return 1;
- } else if (cIsSNaN) {
+ } else if (is_snan(c_cls)) {
return 2;
- } else if (aIsQNaN) {
+ } else if (is_qnan(a_cls)) {
return 0;
- } else if (bIsQNaN) {
+ } else if (is_qnan(b_cls)) {
return 1;
} else {
return 2;
}
} else {
/* Prefer sNaN over qNaN, in the c, a, b order. */
- if (cIsSNaN) {
+ if (is_snan(c_cls)) {
return 2;
- } else if (aIsSNaN) {
+ } else if (is_snan(a_cls)) {
return 0;
- } else if (bIsSNaN) {
+ } else if (is_snan(b_cls)) {
return 1;
- } else if (cIsQNaN) {
+ } else if (is_qnan(c_cls)) {
return 2;
- } else if (aIsQNaN) {
+ } else if (is_qnan(a_cls)) {
return 0;
} else {
return 1;
}
}
-}
#elif defined(TARGET_PPC)
-static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
- flag cIsQNaN, flag cIsSNaN, flag infzero,
- float_status *status)
-{
/* For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer
* to return an input NaN if we have one (ie c) rather than generating
* a default NaN
@@ -686,31 +675,26 @@ static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
/* If fRA is a NaN return it; otherwise if fRB is a NaN return it;
* otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB
*/
- if (aIsSNaN || aIsQNaN) {
+ if (is_nan(a_cls)) {
return 0;
- } else if (cIsSNaN || cIsQNaN) {
+ } else if (is_nan(c_cls)) {
return 2;
} else {
return 1;
}
-}
#else
-/* A default implementation: prefer a to b to c.
- * This is unlikely to actually match any real implementation.
- */
-static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
- flag cIsQNaN, flag cIsSNaN, flag infzero,
- float_status *status)
-{
- if (aIsSNaN || aIsQNaN) {
+ /* A default implementation: prefer a to b to c.
+ * This is unlikely to actually match any real implementation.
+ */
+ if (is_nan(a_cls)) {
return 0;
- } else if (bIsSNaN || bIsQNaN) {
+ } else if (is_nan(b_cls)) {
return 1;
} else {
return 2;
}
-}
#endif
+}
/*----------------------------------------------------------------------------
| Takes two single-precision floating-point values `a' and `b', one of which
diff --git a/fpu/softfloat.c b/fpu/softfloat.c
index 593869e5a7..383f2f5f99 100644
--- a/fpu/softfloat.c
+++ b/fpu/softfloat.c
@@ -601,10 +601,7 @@ static FloatParts pick_nan_muladd(FloatParts a, FloatParts b, FloatParts c,
s->float_exception_flags |= float_flag_invalid;
}
- which = pickNaNMulAdd(is_qnan(a.cls), is_snan(a.cls),
- is_qnan(b.cls), is_snan(b.cls),
- is_qnan(c.cls), is_snan(c.cls),
- inf_zero, s);
+ which = pickNaNMulAdd(a.cls, b.cls, c.cls, inf_zero, s);
if (s->default_nan_mode) {
/* Note that this check is after pickNaNMulAdd so that function
--
2.17.0
next prev parent reply other threads:[~2018-05-12 0:43 UTC|newest]
Thread overview: 59+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-12 0:42 [Qemu-devel] [PATCH v2 00/27] softfloat patch roundup Richard Henderson
2018-05-12 0:42 ` [Qemu-devel] [PATCH v2 01/27] fpu/softfloat: int_to_float ensure r fully initialised Richard Henderson
2018-05-14 10:18 ` Peter Maydell
2018-05-12 0:42 ` [Qemu-devel] [PATCH v2 02/27] fpu/softfloat: Don't set Invalid for float-to-int(MAXINT) Richard Henderson
2018-05-14 10:19 ` Peter Maydell
2018-05-14 16:16 ` Richard Henderson
2018-05-12 0:42 ` [Qemu-devel] [PATCH v2 03/27] fpu/softfloat: Merge NO_SIGNALING_NANS definitions Richard Henderson
2018-05-14 10:20 ` Peter Maydell
2018-05-12 0:42 ` [Qemu-devel] [PATCH v2 04/27] fpu/softfloat: Split floatXX_silence_nan from floatXX_maybe_silence_nan Richard Henderson
2018-05-14 10:23 ` Peter Maydell
2018-05-12 0:42 ` [Qemu-devel] [PATCH v2 05/27] fpu/softfloat: Move softfloat-specialize.h below FloatParts definition Richard Henderson
2018-05-14 10:23 ` Peter Maydell
2018-05-12 0:42 ` [Qemu-devel] [PATCH v2 06/27] fpu/softfloat: Canonicalize NaN fraction Richard Henderson
2018-05-14 10:29 ` Peter Maydell
2018-05-14 16:23 ` Richard Henderson
2018-05-12 0:42 ` [Qemu-devel] [PATCH v2 07/27] fpu/softfloat: Introduce parts_is_snan_frac Richard Henderson
2018-05-14 10:31 ` Peter Maydell
2018-05-12 0:42 ` [Qemu-devel] [PATCH v2 08/27] fpu/softfloat: Replace float_class_dnan with parts_default_nan Richard Henderson
2018-05-14 10:51 ` Peter Maydell
2018-05-12 0:42 ` [Qemu-devel] [PATCH v2 09/27] fpu/softfloat: Replace float_class_msnan with parts_silence_nan Richard Henderson
2018-05-14 10:56 ` Peter Maydell
2018-05-12 0:42 ` [Qemu-devel] [PATCH v2 10/27] fpu/softfloat: re-factor float to float conversions Richard Henderson
2018-05-14 13:47 ` Peter Maydell
2018-05-12 0:42 ` [Qemu-devel] [PATCH v2 11/27] fpu/softfloat: support ARM Alternative half-precision Richard Henderson
2018-05-14 13:52 ` Peter Maydell
2018-05-12 0:42 ` [Qemu-devel] [PATCH v2 12/27] target/arm: Use floatX_silence_nan when we have already checked for SNaN Richard Henderson
2018-05-14 13:52 ` Peter Maydell
2018-05-12 0:42 ` [Qemu-devel] [PATCH v2 13/27] target/arm: convert conversion helpers to fpst/ahp_flag Richard Henderson
2018-05-14 13:41 ` Peter Maydell
2018-05-14 17:27 ` Richard Henderson
2018-05-12 0:42 ` [Qemu-devel] [PATCH v2 14/27] target/arm: squash FZ16 behaviour for conversions Richard Henderson
2018-05-14 13:53 ` Peter Maydell
2018-05-12 0:42 ` [Qemu-devel] [PATCH v2 15/27] target/arm: Fix fp_status_f16 tininess before rounding Richard Henderson
2018-05-14 13:59 ` Peter Maydell
2018-05-12 0:43 ` [Qemu-devel] [PATCH v2 16/27] target/arm: Remove floatX_maybe_silence_nan from conversions Richard Henderson
2018-05-14 14:35 ` Peter Maydell
2018-05-12 0:43 ` [Qemu-devel] [PATCH v2 17/27] target/hppa: " Richard Henderson
2018-05-14 14:35 ` Peter Maydell
2018-05-12 0:43 ` [Qemu-devel] [PATCH v2 18/27] target/m68k: Use floatX_silence_nan when we have already checked for SNaN Richard Henderson
2018-05-14 14:36 ` Peter Maydell
2018-05-12 0:43 ` [Qemu-devel] [PATCH v2 19/27] target/mips: Remove floatX_maybe_silence_nan from conversions Richard Henderson
2018-05-14 14:36 ` Peter Maydell
2018-05-12 0:43 ` [Qemu-devel] [PATCH v2 20/27] target/riscv: " Richard Henderson
2018-05-12 22:15 ` Michael Clark
2018-05-12 0:43 ` [Qemu-devel] [PATCH v2 21/27] target/s390x: " Richard Henderson
2018-05-12 0:43 ` [Qemu-devel] [PATCH v2 22/27] fpu/softfloat: Use float*_silence_nan in propagateFloat*NaN Richard Henderson
2018-05-14 14:38 ` Peter Maydell
2018-05-12 0:43 ` [Qemu-devel] [PATCH v2 23/27] fpu/softfloat: Remove floatX_maybe_silence_nan Richard Henderson
2018-05-14 14:38 ` Peter Maydell
2018-05-12 0:43 ` [Qemu-devel] [PATCH v2 24/27] fpu/softfloat: Specialize on snan_bit_is_one Richard Henderson
2018-05-14 14:44 ` Peter Maydell
2018-05-14 16:54 ` Richard Henderson
2018-05-12 0:43 ` [Qemu-devel] [PATCH v2 25/27] fpu/softfloat: Make is_nan et al available to softfloat-specialize.h Richard Henderson
2018-05-14 14:46 ` Peter Maydell
2018-05-12 0:43 ` [Qemu-devel] [PATCH v2 26/27] fpu/softfloat: Pass FloatClass to pickNaN Richard Henderson
2018-05-14 14:53 ` Peter Maydell
2018-05-12 0:43 ` Richard Henderson [this message]
2018-05-14 14:54 ` [Qemu-devel] [PATCH v2 27/27] fpu/softfloat: Pass FloatClass to pickNaNMulAdd Peter Maydell
2018-05-14 15:04 ` [Qemu-devel] [PATCH v2 00/27] softfloat patch roundup Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180512004311.9299-28-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=alex.bennee@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).