qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 02/37] block: Support byte-based aio callbacks
Date: Tue, 15 May 2018 17:39:58 +0200	[thread overview]
Message-ID: <20180515154033.19899-3-kwolf@redhat.com> (raw)
In-Reply-To: <20180515154033.19899-1-kwolf@redhat.com>

From: Eric Blake <eblake@redhat.com>

We are gradually moving away from sector-based interfaces, towards
byte-based.  Add new sector-based aio callbacks for read and write,
to match the fact that bdrv_aio_pdiscard is already byte-based.

Ideally, drivers should be converted to use coroutine callbacks
rather than aio; but that is not quite as trivial (and if we were
to do that conversion, the null-aio driver would disappear), so for
the short term, converting the signature but keeping things with
aio is easier.  However, we CAN declare that a driver that uses
the byte-based aio interfaces now defaults to byte-based
operations, and must explicitly provide a refresh_limits override
to stick with larger alignments (making the alignment issues more
obvious directly in the drivers touched in the next few patches).

Once all drivers are converted, the sector-based aio callbacks will
be removed; in the meantime, a FIXME comment is added due to a
slight inefficiency that will be touched up as part of that later
cleanup.

Simplify some instances of 'bs->drv' into 'drv' while touching this,
since the local variable already exists to reduce typing.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 include/block/block_int.h |  6 ++++++
 block/io.c                | 38 +++++++++++++++++++++++++++++---------
 2 files changed, 35 insertions(+), 9 deletions(-)

diff --git a/include/block/block_int.h b/include/block/block_int.h
index c4dd1d4bb8..e772e3502b 100644
--- a/include/block/block_int.h
+++ b/include/block/block_int.h
@@ -144,9 +144,15 @@ struct BlockDriver {
     BlockAIOCB *(*bdrv_aio_readv)(BlockDriverState *bs,
         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
         BlockCompletionFunc *cb, void *opaque);
+    BlockAIOCB *(*bdrv_aio_preadv)(BlockDriverState *bs,
+        uint64_t offset, uint64_t bytes, QEMUIOVector *qiov, int flags,
+        BlockCompletionFunc *cb, void *opaque);
     BlockAIOCB *(*bdrv_aio_writev)(BlockDriverState *bs,
         int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
         BlockCompletionFunc *cb, void *opaque);
+    BlockAIOCB *(*bdrv_aio_pwritev)(BlockDriverState *bs,
+        uint64_t offset, uint64_t bytes, QEMUIOVector *qiov, int flags,
+        BlockCompletionFunc *cb, void *opaque);
     BlockAIOCB *(*bdrv_aio_flush)(BlockDriverState *bs,
         BlockCompletionFunc *cb, void *opaque);
     BlockAIOCB *(*bdrv_aio_pdiscard)(BlockDriverState *bs,
diff --git a/block/io.c b/block/io.c
index bd9a19a9c4..407bc25df4 100644
--- a/block/io.c
+++ b/block/io.c
@@ -92,7 +92,8 @@ void bdrv_refresh_limits(BlockDriverState *bs, Error **errp)
     }
 
     /* Default alignment based on whether driver has byte interface */
-    bs->bl.request_alignment = drv->bdrv_co_preadv ? 1 : 512;
+    bs->bl.request_alignment = (drv->bdrv_co_preadv ||
+                                drv->bdrv_aio_preadv) ? 1 : 512;
 
     /* Take some limits from the children as a default */
     if (bs->file) {
@@ -924,12 +925,15 @@ static int coroutine_fn bdrv_driver_preadv(BlockDriverState *bs,
         return drv->bdrv_co_preadv(bs, offset, bytes, qiov, flags);
     }
 
+    /* FIXME - no need to calculate these if .bdrv_aio_preadv exists */
     sector_num = offset >> BDRV_SECTOR_BITS;
     nb_sectors = bytes >> BDRV_SECTOR_BITS;
 
-    assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
-    assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
-    assert((bytes >> BDRV_SECTOR_BITS) <= BDRV_REQUEST_MAX_SECTORS);
+    if (!drv->bdrv_aio_preadv) {
+        assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
+        assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
+        assert((bytes >> BDRV_SECTOR_BITS) <= BDRV_REQUEST_MAX_SECTORS);
+    }
 
     if (drv->bdrv_co_readv) {
         return drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
@@ -939,8 +943,13 @@ static int coroutine_fn bdrv_driver_preadv(BlockDriverState *bs,
             .coroutine = qemu_coroutine_self(),
         };
 
-        acb = bs->drv->bdrv_aio_readv(bs, sector_num, qiov, nb_sectors,
+        if (drv->bdrv_aio_preadv) {
+            acb = drv->bdrv_aio_preadv(bs, offset, bytes, qiov, flags,
+                                       bdrv_co_io_em_complete, &co);
+        } else {
+            acb = drv->bdrv_aio_readv(bs, sector_num, qiov, nb_sectors,
                                       bdrv_co_io_em_complete, &co);
+        }
         if (acb == NULL) {
             return -EIO;
         } else {
@@ -972,12 +981,15 @@ static int coroutine_fn bdrv_driver_pwritev(BlockDriverState *bs,
         goto emulate_flags;
     }
 
+    /* FIXME - no need to calculate these if .bdrv_aio_pwritev exists */
     sector_num = offset >> BDRV_SECTOR_BITS;
     nb_sectors = bytes >> BDRV_SECTOR_BITS;
 
-    assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
-    assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
-    assert((bytes >> BDRV_SECTOR_BITS) <= BDRV_REQUEST_MAX_SECTORS);
+    if (!drv->bdrv_aio_pwritev) {
+        assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
+        assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
+        assert((bytes >> BDRV_SECTOR_BITS) <= BDRV_REQUEST_MAX_SECTORS);
+    }
 
     if (drv->bdrv_co_writev_flags) {
         ret = drv->bdrv_co_writev_flags(bs, sector_num, nb_sectors, qiov,
@@ -992,8 +1004,16 @@ static int coroutine_fn bdrv_driver_pwritev(BlockDriverState *bs,
             .coroutine = qemu_coroutine_self(),
         };
 
-        acb = bs->drv->bdrv_aio_writev(bs, sector_num, qiov, nb_sectors,
+        if (drv->bdrv_aio_pwritev) {
+            acb = drv->bdrv_aio_pwritev(bs, offset, bytes, qiov,
+                                        flags & bs->supported_write_flags,
+                                        bdrv_co_io_em_complete, &co);
+            flags &= ~bs->supported_write_flags;
+        } else {
+            assert(!bs->supported_write_flags);
+            acb = drv->bdrv_aio_writev(bs, sector_num, qiov, nb_sectors,
                                        bdrv_co_io_em_complete, &co);
+        }
         if (acb == NULL) {
             ret = -EIO;
         } else {
-- 
2.13.6

  parent reply	other threads:[~2018-05-15 15:40 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-15 15:39 [Qemu-devel] [PULL 00/37] Block layer patches Kevin Wolf
2018-05-15 15:39 ` [Qemu-devel] [PULL 01/37] block-backend: simplify blk_get_aio_context Kevin Wolf
2018-05-15 15:39 ` Kevin Wolf [this message]
2018-05-15 15:39 ` [Qemu-devel] [PULL 03/37] file-win32: Switch to byte-based callbacks Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 04/37] null: Switch to byte-based read/write Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 05/37] rbd: Switch to byte-based callbacks Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 06/37] vxhs: " Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 07/37] block: Drop last of the sector-based aio callbacks Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 08/37] block: Merge .bdrv_co_writev{, _flags} in drivers Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 09/37] hmp: Allow using a qdev id in block_set_io_throttle Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 10/37] blockjob: expose error string via query Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 11/37] blockjob: Fix assertion in block_job_finalize() Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 12/37] blockjob: Wrappers for progress counter access Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 13/37] blockjob: Move RateLimit to BlockJob Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 14/37] blockjob: Implement block_job_set_speed() centrally Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 15/37] blockjob: Introduce block_job_ratelimit_get_delay() Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 16/37] blockjob: Add block_job_driver() Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 17/37] iotests: Split 214 off of 122 Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 18/37] Fix error message about compressed clusters with OFLAG_COPIED Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 19/37] specs/qcow2: Clarify that compressed clusters have the COPIED bit reset Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 20/37] qcow2: Give the refcount cache the minimum possible size by default Kevin Wolf
2018-05-25 17:10   ` Peter Maydell
2018-05-28  8:38     ` Kevin Wolf
2018-05-28  8:58       ` Alberto Garcia
2018-05-28 13:49         ` Peter Maydell
2018-05-28 13:58           ` Alberto Garcia
2018-05-15 15:40 ` [Qemu-devel] [PULL 21/37] docs: Document the new default sizes of the qcow2 caches Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 22/37] iotests: Add failure matching to common.qemu Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 23/37] iotests: Skip 181 and 201 without userfaultfd Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 24/37] block: Add COR filter driver Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 25/37] block: BLK_PERM_WRITE includes ..._UNCHANGED Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 26/37] block: Add BDRV_REQ_WRITE_UNCHANGED flag Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 27/37] block: Set BDRV_REQ_WRITE_UNCHANGED for COR writes Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 28/37] block/quorum: Support BDRV_REQ_WRITE_UNCHANGED Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 29/37] block: Support BDRV_REQ_WRITE_UNCHANGED in filters Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 30/37] iotests: Clean up wrap image in 197 Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 31/37] iotests: Copy 197 for COR filter driver Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 32/37] iotests: Add test for COR across nodes Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 33/37] qemu-img: Check post-truncation size Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 34/37] block: Document BDRV_REQ_WRITE_UNCHANGED support Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 35/37] qemu-io: Use purely string blockdev options Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 36/37] qemu-img: Use only string options in img_open_opts Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 37/37] iotests: Add test for -U/force-share conflicts Kevin Wolf
2018-05-15 16:59 ` [Qemu-devel] [PULL 00/37] Block layer patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180515154033.19899-3-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).