From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 03/37] file-win32: Switch to byte-based callbacks
Date: Tue, 15 May 2018 17:39:59 +0200 [thread overview]
Message-ID: <20180515154033.19899-4-kwolf@redhat.com> (raw)
In-Reply-To: <20180515154033.19899-1-kwolf@redhat.com>
From: Eric Blake <eblake@redhat.com>
We are gradually moving away from sector-based interfaces, towards
byte-based. Make the change for the last few sector-based callbacks
in the file-win32 driver.
Note that the driver was already using byte-based calls for
performing actual I/O, so this just gets rid of a round trip
of scaling; however, as I don't know if Windows is tolerant of
non-sector AIO operations, I went with the conservative approach
of modifying .bdrv_refresh_limits to override the block layer
defaults back to the pre-patch value of 512.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
include/block/raw-aio.h | 2 +-
block/file-win32.c | 47 +++++++++++++++++++++++++++++------------------
block/win32-aio.c | 5 ++---
3 files changed, 32 insertions(+), 22 deletions(-)
diff --git a/include/block/raw-aio.h b/include/block/raw-aio.h
index a4cdbbf1b7..9e47b8a629 100644
--- a/include/block/raw-aio.h
+++ b/include/block/raw-aio.h
@@ -57,7 +57,7 @@ void win32_aio_cleanup(QEMUWin32AIOState *aio);
int win32_aio_attach(QEMUWin32AIOState *aio, HANDLE hfile);
BlockAIOCB *win32_aio_submit(BlockDriverState *bs,
QEMUWin32AIOState *aio, HANDLE hfile,
- int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
+ uint64_t offset, uint64_t bytes, QEMUIOVector *qiov,
BlockCompletionFunc *cb, void *opaque, int type);
void win32_aio_detach_aio_context(QEMUWin32AIOState *aio,
AioContext *old_context);
diff --git a/block/file-win32.c b/block/file-win32.c
index 2e2f746bb1..3c67db4336 100644
--- a/block/file-win32.c
+++ b/block/file-win32.c
@@ -251,7 +251,11 @@ static void raw_probe_alignment(BlockDriverState *bs, Error **errp)
&dg.Geometry.BytesPerSector,
&freeClusters, &totalClusters);
bs->bl.request_alignment = dg.Geometry.BytesPerSector;
+ return;
}
+
+ /* XXX Does Windows support AIO on less than 512-byte alignment? */
+ bs->bl.request_alignment = 512;
}
static void raw_parse_flags(int flags, bool use_aio, int *access_flags,
@@ -410,32 +414,32 @@ fail:
return ret;
}
-static BlockAIOCB *raw_aio_readv(BlockDriverState *bs,
- int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
- BlockCompletionFunc *cb, void *opaque)
+static BlockAIOCB *raw_aio_preadv(BlockDriverState *bs,
+ uint64_t offset, uint64_t bytes,
+ QEMUIOVector *qiov, int flags,
+ BlockCompletionFunc *cb, void *opaque)
{
BDRVRawState *s = bs->opaque;
if (s->aio) {
- return win32_aio_submit(bs, s->aio, s->hfile, sector_num, qiov,
- nb_sectors, cb, opaque, QEMU_AIO_READ);
+ return win32_aio_submit(bs, s->aio, s->hfile, offset, bytes, qiov,
+ cb, opaque, QEMU_AIO_READ);
} else {
- return paio_submit(bs, s->hfile, sector_num << BDRV_SECTOR_BITS, qiov,
- nb_sectors << BDRV_SECTOR_BITS,
+ return paio_submit(bs, s->hfile, offset, qiov, bytes,
cb, opaque, QEMU_AIO_READ);
}
}
-static BlockAIOCB *raw_aio_writev(BlockDriverState *bs,
- int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
- BlockCompletionFunc *cb, void *opaque)
+static BlockAIOCB *raw_aio_pwritev(BlockDriverState *bs,
+ uint64_t offset, uint64_t bytes,
+ QEMUIOVector *qiov, int flags,
+ BlockCompletionFunc *cb, void *opaque)
{
BDRVRawState *s = bs->opaque;
if (s->aio) {
- return win32_aio_submit(bs, s->aio, s->hfile, sector_num, qiov,
- nb_sectors, cb, opaque, QEMU_AIO_WRITE);
+ return win32_aio_submit(bs, s->aio, s->hfile, offset, bytes, qiov,
+ cb, opaque, QEMU_AIO_WRITE);
} else {
- return paio_submit(bs, s->hfile, sector_num << BDRV_SECTOR_BITS, qiov,
- nb_sectors << BDRV_SECTOR_BITS,
+ return paio_submit(bs, s->hfile, offset, qiov, bytes,
cb, opaque, QEMU_AIO_WRITE);
}
}
@@ -632,8 +636,8 @@ BlockDriver bdrv_file = {
.bdrv_co_create_opts = raw_co_create_opts,
.bdrv_has_zero_init = bdrv_has_zero_init_1,
- .bdrv_aio_readv = raw_aio_readv,
- .bdrv_aio_writev = raw_aio_writev,
+ .bdrv_aio_preadv = raw_aio_preadv,
+ .bdrv_aio_pwritev = raw_aio_pwritev,
.bdrv_aio_flush = raw_aio_flush,
.bdrv_truncate = raw_truncate,
@@ -708,6 +712,12 @@ static void hdev_parse_filename(const char *filename, QDict *options,
bdrv_parse_filename_strip_prefix(filename, "host_device:", options);
}
+static void hdev_refresh_limits(BlockDriverState *bs, Error **errp)
+{
+ /* XXX Does Windows support AIO on less than 512-byte alignment? */
+ bs->bl.request_alignment = 512;
+}
+
static int hdev_open(BlockDriverState *bs, QDict *options, int flags,
Error **errp)
{
@@ -793,9 +803,10 @@ static BlockDriver bdrv_host_device = {
.bdrv_probe_device = hdev_probe_device,
.bdrv_file_open = hdev_open,
.bdrv_close = raw_close,
+ .bdrv_refresh_limits = hdev_refresh_limits,
- .bdrv_aio_readv = raw_aio_readv,
- .bdrv_aio_writev = raw_aio_writev,
+ .bdrv_aio_preadv = raw_aio_preadv,
+ .bdrv_aio_pwritev = raw_aio_pwritev,
.bdrv_aio_flush = raw_aio_flush,
.bdrv_detach_aio_context = raw_detach_aio_context,
diff --git a/block/win32-aio.c b/block/win32-aio.c
index 3be8f458fa..9cd355d42f 100644
--- a/block/win32-aio.c
+++ b/block/win32-aio.c
@@ -112,15 +112,14 @@ static const AIOCBInfo win32_aiocb_info = {
BlockAIOCB *win32_aio_submit(BlockDriverState *bs,
QEMUWin32AIOState *aio, HANDLE hfile,
- int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
+ uint64_t offset, uint64_t bytes, QEMUIOVector *qiov,
BlockCompletionFunc *cb, void *opaque, int type)
{
struct QEMUWin32AIOCB *waiocb;
- uint64_t offset = sector_num * 512;
DWORD rc;
waiocb = qemu_aio_get(&win32_aiocb_info, bs, cb, opaque);
- waiocb->nbytes = nb_sectors * 512;
+ waiocb->nbytes = bytes;
waiocb->qiov = qiov;
waiocb->is_read = (type == QEMU_AIO_READ);
--
2.13.6
next prev parent reply other threads:[~2018-05-15 15:40 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-15 15:39 [Qemu-devel] [PULL 00/37] Block layer patches Kevin Wolf
2018-05-15 15:39 ` [Qemu-devel] [PULL 01/37] block-backend: simplify blk_get_aio_context Kevin Wolf
2018-05-15 15:39 ` [Qemu-devel] [PULL 02/37] block: Support byte-based aio callbacks Kevin Wolf
2018-05-15 15:39 ` Kevin Wolf [this message]
2018-05-15 15:40 ` [Qemu-devel] [PULL 04/37] null: Switch to byte-based read/write Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 05/37] rbd: Switch to byte-based callbacks Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 06/37] vxhs: " Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 07/37] block: Drop last of the sector-based aio callbacks Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 08/37] block: Merge .bdrv_co_writev{, _flags} in drivers Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 09/37] hmp: Allow using a qdev id in block_set_io_throttle Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 10/37] blockjob: expose error string via query Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 11/37] blockjob: Fix assertion in block_job_finalize() Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 12/37] blockjob: Wrappers for progress counter access Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 13/37] blockjob: Move RateLimit to BlockJob Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 14/37] blockjob: Implement block_job_set_speed() centrally Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 15/37] blockjob: Introduce block_job_ratelimit_get_delay() Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 16/37] blockjob: Add block_job_driver() Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 17/37] iotests: Split 214 off of 122 Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 18/37] Fix error message about compressed clusters with OFLAG_COPIED Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 19/37] specs/qcow2: Clarify that compressed clusters have the COPIED bit reset Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 20/37] qcow2: Give the refcount cache the minimum possible size by default Kevin Wolf
2018-05-25 17:10 ` Peter Maydell
2018-05-28 8:38 ` Kevin Wolf
2018-05-28 8:58 ` Alberto Garcia
2018-05-28 13:49 ` Peter Maydell
2018-05-28 13:58 ` Alberto Garcia
2018-05-15 15:40 ` [Qemu-devel] [PULL 21/37] docs: Document the new default sizes of the qcow2 caches Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 22/37] iotests: Add failure matching to common.qemu Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 23/37] iotests: Skip 181 and 201 without userfaultfd Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 24/37] block: Add COR filter driver Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 25/37] block: BLK_PERM_WRITE includes ..._UNCHANGED Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 26/37] block: Add BDRV_REQ_WRITE_UNCHANGED flag Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 27/37] block: Set BDRV_REQ_WRITE_UNCHANGED for COR writes Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 28/37] block/quorum: Support BDRV_REQ_WRITE_UNCHANGED Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 29/37] block: Support BDRV_REQ_WRITE_UNCHANGED in filters Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 30/37] iotests: Clean up wrap image in 197 Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 31/37] iotests: Copy 197 for COR filter driver Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 32/37] iotests: Add test for COR across nodes Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 33/37] qemu-img: Check post-truncation size Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 34/37] block: Document BDRV_REQ_WRITE_UNCHANGED support Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 35/37] qemu-io: Use purely string blockdev options Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 36/37] qemu-img: Use only string options in img_open_opts Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 37/37] iotests: Add test for -U/force-share conflicts Kevin Wolf
2018-05-15 16:59 ` [Qemu-devel] [PULL 00/37] Block layer patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180515154033.19899-4-kwolf@redhat.com \
--to=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).