qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 06/37] vxhs: Switch to byte-based callbacks
Date: Tue, 15 May 2018 17:40:02 +0200	[thread overview]
Message-ID: <20180515154033.19899-7-kwolf@redhat.com> (raw)
In-Reply-To: <20180515154033.19899-1-kwolf@redhat.com>

From: Eric Blake <eblake@redhat.com>

We are gradually moving away from sector-based interfaces, towards
byte-based.  Make the change for the last few sector-based callbacks
in the vxhs driver.

Note that the driver was already using byte-based calls for
performing actual I/O, so this just gets rid of a round trip
of scaling; however, as I don't know if VxHS is tolerant of
non-sector AIO operations, I went with the conservative approach
of adding .bdrv_refresh_limits to override the block layer
defaults back to the pre-patch value of 512.

Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 block/vxhs.c | 43 ++++++++++++++++++++++---------------------
 1 file changed, 22 insertions(+), 21 deletions(-)

diff --git a/block/vxhs.c b/block/vxhs.c
index 55ae1a666e..339e23218d 100644
--- a/block/vxhs.c
+++ b/block/vxhs.c
@@ -216,6 +216,12 @@ static void vxhs_parse_filename(const char *filename, QDict *options,
     }
 }
 
+static void vxhs_refresh_limits(BlockDriverState *bs, Error **errp)
+{
+    /* XXX Does VXHS support AIO on less than 512-byte alignment? */
+    bs->bl.request_alignment = 512;
+}
+
 static int vxhs_init_and_ref(void)
 {
     if (vxhs_ref++ == 0) {
@@ -424,21 +430,17 @@ static const AIOCBInfo vxhs_aiocb_info = {
  * and is passed to QNIO. When QNIO completes the work,
  * it will be passed back through the callback.
  */
-static BlockAIOCB *vxhs_aio_rw(BlockDriverState *bs, int64_t sector_num,
-                               QEMUIOVector *qiov, int nb_sectors,
+static BlockAIOCB *vxhs_aio_rw(BlockDriverState *bs, uint64_t offset,
+                               QEMUIOVector *qiov, uint64_t size,
                                BlockCompletionFunc *cb, void *opaque,
                                VDISKAIOCmd iodir)
 {
     VXHSAIOCB *acb = NULL;
     BDRVVXHSState *s = bs->opaque;
-    size_t size;
-    uint64_t offset;
     int iio_flags = 0;
     int ret = 0;
     void *dev_handle = s->vdisk_hostinfo.dev_handle;
 
-    offset = sector_num * BDRV_SECTOR_SIZE;
-    size = nb_sectors * BDRV_SECTOR_SIZE;
     acb = qemu_aio_get(&vxhs_aiocb_info, bs, cb, opaque);
 
     /*
@@ -451,11 +453,11 @@ static BlockAIOCB *vxhs_aio_rw(BlockDriverState *bs, int64_t sector_num,
     switch (iodir) {
     case VDISK_AIO_WRITE:
             ret = iio_writev(dev_handle, acb, qiov->iov, qiov->niov,
-                             offset, (uint64_t)size, iio_flags);
+                             offset, size, iio_flags);
             break;
     case VDISK_AIO_READ:
             ret = iio_readv(dev_handle, acb, qiov->iov, qiov->niov,
-                            offset, (uint64_t)size, iio_flags);
+                            offset, size, iio_flags);
             break;
     default:
             trace_vxhs_aio_rw_invalid(iodir);
@@ -474,22 +476,20 @@ errout:
     return NULL;
 }
 
-static BlockAIOCB *vxhs_aio_readv(BlockDriverState *bs,
-                                   int64_t sector_num, QEMUIOVector *qiov,
-                                   int nb_sectors,
+static BlockAIOCB *vxhs_aio_preadv(BlockDriverState *bs,
+                                   uint64_t offset, uint64_t bytes,
+                                   QEMUIOVector *qiov, int flags,
                                    BlockCompletionFunc *cb, void *opaque)
 {
-    return vxhs_aio_rw(bs, sector_num, qiov, nb_sectors, cb,
-                       opaque, VDISK_AIO_READ);
+    return vxhs_aio_rw(bs, offset, qiov, bytes, cb, opaque, VDISK_AIO_READ);
 }
 
-static BlockAIOCB *vxhs_aio_writev(BlockDriverState *bs,
-                                   int64_t sector_num, QEMUIOVector *qiov,
-                                   int nb_sectors,
-                                   BlockCompletionFunc *cb, void *opaque)
+static BlockAIOCB *vxhs_aio_pwritev(BlockDriverState *bs,
+                                    uint64_t offset, uint64_t bytes,
+                                    QEMUIOVector *qiov, int flags,
+                                    BlockCompletionFunc *cb, void *opaque)
 {
-    return vxhs_aio_rw(bs, sector_num, qiov, nb_sectors,
-                       cb, opaque, VDISK_AIO_WRITE);
+    return vxhs_aio_rw(bs, offset, qiov, bytes, cb, opaque, VDISK_AIO_WRITE);
 }
 
 static void vxhs_close(BlockDriverState *bs)
@@ -561,10 +561,11 @@ static BlockDriver bdrv_vxhs = {
     .instance_size                = sizeof(BDRVVXHSState),
     .bdrv_file_open               = vxhs_open,
     .bdrv_parse_filename          = vxhs_parse_filename,
+    .bdrv_refresh_limits          = vxhs_refresh_limits,
     .bdrv_close                   = vxhs_close,
     .bdrv_getlength               = vxhs_getlength,
-    .bdrv_aio_readv               = vxhs_aio_readv,
-    .bdrv_aio_writev              = vxhs_aio_writev,
+    .bdrv_aio_preadv              = vxhs_aio_preadv,
+    .bdrv_aio_pwritev             = vxhs_aio_pwritev,
 };
 
 static void bdrv_vxhs_init(void)
-- 
2.13.6

  parent reply	other threads:[~2018-05-15 15:40 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-15 15:39 [Qemu-devel] [PULL 00/37] Block layer patches Kevin Wolf
2018-05-15 15:39 ` [Qemu-devel] [PULL 01/37] block-backend: simplify blk_get_aio_context Kevin Wolf
2018-05-15 15:39 ` [Qemu-devel] [PULL 02/37] block: Support byte-based aio callbacks Kevin Wolf
2018-05-15 15:39 ` [Qemu-devel] [PULL 03/37] file-win32: Switch to byte-based callbacks Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 04/37] null: Switch to byte-based read/write Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 05/37] rbd: Switch to byte-based callbacks Kevin Wolf
2018-05-15 15:40 ` Kevin Wolf [this message]
2018-05-15 15:40 ` [Qemu-devel] [PULL 07/37] block: Drop last of the sector-based aio callbacks Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 08/37] block: Merge .bdrv_co_writev{, _flags} in drivers Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 09/37] hmp: Allow using a qdev id in block_set_io_throttle Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 10/37] blockjob: expose error string via query Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 11/37] blockjob: Fix assertion in block_job_finalize() Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 12/37] blockjob: Wrappers for progress counter access Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 13/37] blockjob: Move RateLimit to BlockJob Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 14/37] blockjob: Implement block_job_set_speed() centrally Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 15/37] blockjob: Introduce block_job_ratelimit_get_delay() Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 16/37] blockjob: Add block_job_driver() Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 17/37] iotests: Split 214 off of 122 Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 18/37] Fix error message about compressed clusters with OFLAG_COPIED Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 19/37] specs/qcow2: Clarify that compressed clusters have the COPIED bit reset Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 20/37] qcow2: Give the refcount cache the minimum possible size by default Kevin Wolf
2018-05-25 17:10   ` Peter Maydell
2018-05-28  8:38     ` Kevin Wolf
2018-05-28  8:58       ` Alberto Garcia
2018-05-28 13:49         ` Peter Maydell
2018-05-28 13:58           ` Alberto Garcia
2018-05-15 15:40 ` [Qemu-devel] [PULL 21/37] docs: Document the new default sizes of the qcow2 caches Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 22/37] iotests: Add failure matching to common.qemu Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 23/37] iotests: Skip 181 and 201 without userfaultfd Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 24/37] block: Add COR filter driver Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 25/37] block: BLK_PERM_WRITE includes ..._UNCHANGED Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 26/37] block: Add BDRV_REQ_WRITE_UNCHANGED flag Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 27/37] block: Set BDRV_REQ_WRITE_UNCHANGED for COR writes Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 28/37] block/quorum: Support BDRV_REQ_WRITE_UNCHANGED Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 29/37] block: Support BDRV_REQ_WRITE_UNCHANGED in filters Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 30/37] iotests: Clean up wrap image in 197 Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 31/37] iotests: Copy 197 for COR filter driver Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 32/37] iotests: Add test for COR across nodes Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 33/37] qemu-img: Check post-truncation size Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 34/37] block: Document BDRV_REQ_WRITE_UNCHANGED support Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 35/37] qemu-io: Use purely string blockdev options Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 36/37] qemu-img: Use only string options in img_open_opts Kevin Wolf
2018-05-15 15:40 ` [Qemu-devel] [PULL 37/37] iotests: Add test for -U/force-share conflicts Kevin Wolf
2018-05-15 16:59 ` [Qemu-devel] [PULL 00/37] Block layer patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180515154033.19899-7-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).