From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: peter.maydell@linaro.org
Subject: [Qemu-devel] [PULL 25/28] fpu/softfloat: Pass FloatClass to pickNaNMulAdd
Date: Wed, 16 May 2018 08:52:40 -0700 [thread overview]
Message-ID: <20180516155243.16937-26-richard.henderson@linaro.org> (raw)
In-Reply-To: <20180516155243.16937-1-richard.henderson@linaro.org>
For each operand, pass a single enumeration instead of a pair of booleans.
The commit also merges multiple different ifdef-selected implementations
of pickNaNMulAdd into a single function whose body is ifdef-selected.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
fpu/softfloat-specialize.h | 70 +++++++++++++++-----------------------
fpu/softfloat.c | 5 +--
2 files changed, 28 insertions(+), 47 deletions(-)
diff --git a/fpu/softfloat-specialize.h b/fpu/softfloat-specialize.h
index 2695183188..0399dfe011 100644
--- a/fpu/softfloat-specialize.h
+++ b/fpu/softfloat-specialize.h
@@ -594,15 +594,14 @@ static int pickNaN(FloatClass a_cls, FloatClass b_cls,
| information.
| Return values : 0 : a; 1 : b; 2 : c; 3 : default-NaN
*----------------------------------------------------------------------------*/
-#if defined(TARGET_ARM)
-static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
- flag cIsQNaN, flag cIsSNaN, flag infzero,
- float_status *status)
+static int pickNaNMulAdd(FloatClass a_cls, FloatClass b_cls, FloatClass c_cls,
+ bool infzero, float_status *status)
{
+#if defined(TARGET_ARM)
/* For ARM, the (inf,zero,qnan) case sets InvalidOp and returns
* the default NaN
*/
- if (infzero && cIsQNaN) {
+ if (infzero && is_qnan(c_cls)) {
float_raise(float_flag_invalid, status);
return 3;
}
@@ -610,25 +609,20 @@ static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
/* This looks different from the ARM ARM pseudocode, because the ARM ARM
* puts the operands to a fused mac operation (a*b)+c in the order c,a,b.
*/
- if (cIsSNaN) {
+ if (is_snan(c_cls)) {
return 2;
- } else if (aIsSNaN) {
+ } else if (is_snan(a_cls)) {
return 0;
- } else if (bIsSNaN) {
+ } else if (is_snan(b_cls)) {
return 1;
- } else if (cIsQNaN) {
+ } else if (is_qnan(c_cls)) {
return 2;
- } else if (aIsQNaN) {
+ } else if (is_qnan(a_cls)) {
return 0;
} else {
return 1;
}
-}
#elif defined(TARGET_MIPS)
-static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
- flag cIsQNaN, flag cIsSNaN, flag infzero,
- float_status *status)
-{
/* For MIPS, the (inf,zero,qnan) case sets InvalidOp and returns
* the default NaN
*/
@@ -639,41 +633,36 @@ static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
if (snan_bit_is_one(status)) {
/* Prefer sNaN over qNaN, in the a, b, c order. */
- if (aIsSNaN) {
+ if (is_snan(a_cls)) {
return 0;
- } else if (bIsSNaN) {
+ } else if (is_snan(b_cls)) {
return 1;
- } else if (cIsSNaN) {
+ } else if (is_snan(c_cls)) {
return 2;
- } else if (aIsQNaN) {
+ } else if (is_qnan(a_cls)) {
return 0;
- } else if (bIsQNaN) {
+ } else if (is_qnan(b_cls)) {
return 1;
} else {
return 2;
}
} else {
/* Prefer sNaN over qNaN, in the c, a, b order. */
- if (cIsSNaN) {
+ if (is_snan(c_cls)) {
return 2;
- } else if (aIsSNaN) {
+ } else if (is_snan(a_cls)) {
return 0;
- } else if (bIsSNaN) {
+ } else if (is_snan(b_cls)) {
return 1;
- } else if (cIsQNaN) {
+ } else if (is_qnan(c_cls)) {
return 2;
- } else if (aIsQNaN) {
+ } else if (is_qnan(a_cls)) {
return 0;
} else {
return 1;
}
}
-}
#elif defined(TARGET_PPC)
-static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
- flag cIsQNaN, flag cIsSNaN, flag infzero,
- float_status *status)
-{
/* For PPC, the (inf,zero,qnan) case sets InvalidOp, but we prefer
* to return an input NaN if we have one (ie c) rather than generating
* a default NaN
@@ -686,31 +675,26 @@ static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
/* If fRA is a NaN return it; otherwise if fRB is a NaN return it;
* otherwise return fRC. Note that muladd on PPC is (fRA * fRC) + frB
*/
- if (aIsSNaN || aIsQNaN) {
+ if (is_nan(a_cls)) {
return 0;
- } else if (cIsSNaN || cIsQNaN) {
+ } else if (is_nan(c_cls)) {
return 2;
} else {
return 1;
}
-}
#else
-/* A default implementation: prefer a to b to c.
- * This is unlikely to actually match any real implementation.
- */
-static int pickNaNMulAdd(flag aIsQNaN, flag aIsSNaN, flag bIsQNaN, flag bIsSNaN,
- flag cIsQNaN, flag cIsSNaN, flag infzero,
- float_status *status)
-{
- if (aIsSNaN || aIsQNaN) {
+ /* A default implementation: prefer a to b to c.
+ * This is unlikely to actually match any real implementation.
+ */
+ if (is_nan(a_cls)) {
return 0;
- } else if (bIsSNaN || bIsQNaN) {
+ } else if (is_nan(b_cls)) {
return 1;
} else {
return 2;
}
-}
#endif
+}
/*----------------------------------------------------------------------------
| Takes two single-precision floating-point values `a' and `b', one of which
diff --git a/fpu/softfloat.c b/fpu/softfloat.c
index 55954385ff..8e97602ace 100644
--- a/fpu/softfloat.c
+++ b/fpu/softfloat.c
@@ -601,10 +601,7 @@ static FloatParts pick_nan_muladd(FloatParts a, FloatParts b, FloatParts c,
s->float_exception_flags |= float_flag_invalid;
}
- which = pickNaNMulAdd(is_qnan(a.cls), is_snan(a.cls),
- is_qnan(b.cls), is_snan(b.cls),
- is_qnan(c.cls), is_snan(c.cls),
- inf_zero, s);
+ which = pickNaNMulAdd(a.cls, b.cls, c.cls, inf_zero, s);
if (s->default_nan_mode) {
/* Note that this check is after pickNaNMulAdd so that function
--
2.17.0
next prev parent reply other threads:[~2018-05-16 15:53 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-16 15:52 [Qemu-devel] [PULL 00/28] softfloat patch roundup Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 01/28] fpu/softfloat: Fix conversion from uint64 to float128 Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 02/28] fpu/softfloat: Merge NO_SIGNALING_NANS definitions Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 03/28] fpu/softfloat: Split floatXX_silence_nan from floatXX_maybe_silence_nan Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 04/28] fpu/softfloat: Move softfloat-specialize.h below FloatParts definition Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 05/28] fpu/softfloat: Canonicalize NaN fraction Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 06/28] fpu/softfloat: Introduce parts_is_snan_frac Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 07/28] fpu/softfloat: Replace float_class_dnan with parts_default_nan Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 08/28] fpu/softfloat: Replace float_class_msnan with parts_silence_nan Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 09/28] target/arm: convert conversion helpers to fpst/ahp_flag Richard Henderson
2018-05-17 10:16 ` Peter Maydell
2018-05-17 22:19 ` Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 10/28] target/arm: squash FZ16 behaviour for conversions Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 11/28] fpu/softfloat: Partial support for ARM Alternative half-precision Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 12/28] fpu/softfloat: re-factor float to float conversions Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 13/28] target/arm: Use floatX_silence_nan when we have already checked for SNaN Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 14/28] target/arm: Remove floatX_maybe_silence_nan from conversions Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 15/28] target/hppa: " Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 16/28] target/m68k: Use floatX_silence_nan when we have already checked for SNaN Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 17/28] target/mips: Remove floatX_maybe_silence_nan from conversions Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 18/28] target/riscv: " Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 19/28] target/s390x: " Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 20/28] fpu/softfloat: Use float*_silence_nan in propagateFloat*NaN Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 21/28] fpu/softfloat: Remove floatX_maybe_silence_nan Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 22/28] fpu/softfloat: Specialize on snan_bit_is_one Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 23/28] fpu/softfloat: Make is_nan et al available to softfloat-specialize.h Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 24/28] fpu/softfloat: Pass FloatClass to pickNaN Richard Henderson
2018-05-16 15:52 ` Richard Henderson [this message]
2018-05-16 15:52 ` [Qemu-devel] [PULL 26/28] fpu/softfloat: Define floatN_default_nan in terms of parts_default_nan Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 27/28] fpu/softfloat: Clean up parts_default_nan Richard Henderson
2018-05-16 15:52 ` [Qemu-devel] [PULL 28/28] fpu/softfloat: Define floatN_silence_nan in terms of parts_silence_nan Richard Henderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180516155243.16937-26-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).