From: John Snow <jsnow@redhat.com>
To: qemu-devel@nongnu.org, qemu-block@nongnu.org
Cc: John Snow <jsnow@redhat.com>
Subject: [Qemu-devel] [PATCH 01/16] ahci: add port register enumeration
Date: Fri, 25 May 2018 19:54:54 -0400 [thread overview]
Message-ID: <20180525235509.11282-2-jsnow@redhat.com> (raw)
In-Reply-To: <20180525235509.11282-1-jsnow@redhat.com>
Instead of tracking offsets, lets count the registers.
Signed-off-by: John Snow <jsnow@redhat.com>
---
hw/ide/ahci.c | 25 +++++++++++++++++++++++++
hw/ide/ahci_internal.h | 29 +++++++++++++++++++++++++++++
2 files changed, 54 insertions(+)
diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index e22d7be05f..48130c6439 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -46,6 +46,31 @@ static bool ahci_map_fis_address(AHCIDevice *ad);
static void ahci_unmap_clb_address(AHCIDevice *ad);
static void ahci_unmap_fis_address(AHCIDevice *ad);
+__attribute__((__unused__)) /* TODO */
+static const char *AHCIPortReg_lookup[AHCI_PORT_REG__COUNT] = {
+ [AHCI_PORT_REG_LST_ADDR] = "PxCLB",
+ [AHCI_PORT_REG_LST_ADDR_HI] = "PxCLBU",
+ [AHCI_PORT_REG_FIS_ADDR] = "PxFB",
+ [AHCI_PORT_REG_FIS_ADDR_HI] = "PxFBU",
+ [AHCI_PORT_REG_IRQ_STAT] = "PxIS",
+ [AHCI_PORT_REG_IRQ_MASK] = "PXIE",
+ [AHCI_PORT_REG_CMD] = "PxCMD",
+ [7] = "Reserved",
+ [AHCI_PORT_REG_TFDATA] = "PxTFD",
+ [AHCI_PORT_REG_SIG] = "PxSIG",
+ [AHCI_PORT_REG_SCR_STAT] = "PxSSTS",
+ [AHCI_PORT_REG_SCR_CTL] = "PxSCTL",
+ [AHCI_PORT_REG_SCR_ERR] = "PxSERR",
+ [AHCI_PORT_REG_SCR_ACT] = "PxSACT",
+ [AHCI_PORT_REG_CMD_ISSUE] = "PxCI",
+ [AHCI_PORT_REG_SCR_NOTIF] = "PxSNTF",
+ [AHCI_PORT_REG_FIS_CTL] = "PxFBS",
+ [AHCI_PORT_REG_DEV_SLEEP] = "PxDEVSLP",
+ [18 ... 27] = "Reserved",
+ [AHCI_PORT_REG_VENDOR_1 ...
+ AHCI_PORT_REG_VENDOR_4] = "PxVS",
+};
+
static const char *AHCIPortIRQ_lookup[AHCI_PORT_IRQ__COUNT] = {
[AHCI_PORT_IRQ_BIT_DHRS] = "DHRS",
[AHCI_PORT_IRQ_BIT_PSS] = "PSS",
diff --git a/hw/ide/ahci_internal.h b/hw/ide/ahci_internal.h
index 1a25d6c039..eb7e1eefc0 100644
--- a/hw/ide/ahci_internal.h
+++ b/hw/ide/ahci_internal.h
@@ -74,6 +74,34 @@
#define HOST_CAP_NCQ (1 << 30) /* Native Command Queueing */
#define HOST_CAP_64 (1U << 31) /* PCI DAC (64-bit DMA) support */
+/* registers for each SATA port */
+enum AHCIPortReg {
+ AHCI_PORT_REG_LST_ADDR = 0, /* PxCLB: command list DMA addr */
+ AHCI_PORT_REG_LST_ADDR_HI = 1, /* PxCLBU: command list DMA addr hi */
+ AHCI_PORT_REG_FIS_ADDR = 2, /* PxFB: FIS rx buf addr */
+ AHCI_PORT_REG_FIS_ADDR_HI = 3, /* PxFBU: FIX rx buf addr hi */
+ AHCI_PORT_REG_IRQ_STAT = 4, /* PxIS: interrupt status */
+ AHCI_PORT_REG_IRQ_MASK = 5, /* PxIE: interrupt enable/disable mask */
+ AHCI_PORT_REG_CMD = 6, /* PxCMD: port command */
+ /* RESERVED */
+ AHCI_PORT_REG_TFDATA = 8, /* PxTFD: taskfile data */
+ AHCI_PORT_REG_SIG = 9, /* PxSIG: device TF signature */
+ AHCI_PORT_REG_SCR_STAT = 10, /* PxSSTS: SATA phy register: SStatus */
+ AHCI_PORT_REG_SCR_CTL = 11, /* PxSCTL: SATA phy register: SControl */
+ AHCI_PORT_REG_SCR_ERR = 12, /* PxSERR: SATA phy register: SError */
+ AHCI_PORT_REG_SCR_ACT = 13, /* PxSACT: SATA phy register: SActive */
+ AHCI_PORT_REG_CMD_ISSUE = 14, /* PxCI: command issue */
+ AHCI_PORT_REG_SCR_NOTIF = 15, /* PxSNTF: SATA phy register: SNotification */
+ AHCI_PORT_REG_FIS_CTL = 16, /* PxFBS: Port multiplier switching ctl */
+ AHCI_PORT_REG_DEV_SLEEP = 17, /* PxDEVSLP: device sleep control */
+ /* RESERVED */
+ AHCI_PORT_REG_VENDOR_1 = 28, /* PxVS: Vendor Specific */
+ AHCI_PORT_REG_VENDOR_2 = 29,
+ AHCI_PORT_REG_VENDOR_3 = 30,
+ AHCI_PORT_REG_VENDOR_4 = 31,
+ AHCI_PORT_REG__COUNT = 32
+};
+
/* registers for each SATA port */
#define PORT_LST_ADDR 0x00 /* command list DMA addr */
#define PORT_LST_ADDR_HI 0x04 /* command list DMA addr hi */
@@ -82,6 +110,7 @@
#define PORT_IRQ_STAT 0x10 /* interrupt status */
#define PORT_IRQ_MASK 0x14 /* interrupt enable/disable mask */
#define PORT_CMD 0x18 /* port command */
+
#define PORT_TFDATA 0x20 /* taskfile data */
#define PORT_SIG 0x24 /* device TF signature */
#define PORT_SCR_STAT 0x28 /* SATA phy register: SStatus */
--
2.14.3
next prev parent reply other threads:[~2018-05-25 23:55 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-25 23:54 [Qemu-devel] [PATCH 00/16] AHCI: tracing improvements John Snow
2018-05-25 23:54 ` John Snow [this message]
2018-05-25 23:54 ` [Qemu-devel] [PATCH 02/16] ahci: modify ahci_port_read to use register numbers John Snow
2018-05-25 23:54 ` [Qemu-devel] [PATCH 03/16] ahci: make port read traces more descriptive John Snow
2018-05-26 4:44 ` Philippe Mathieu-Daudé
2018-05-30 20:17 ` John Snow
2018-05-30 21:28 ` Philippe Mathieu-Daudé
2018-05-31 16:25 ` John Snow
2018-05-25 23:54 ` [Qemu-devel] [PATCH 04/16] ahci: fix spacing damage on ahci_port_write John Snow
2018-05-25 23:54 ` [Qemu-devel] [PATCH 05/16] ahci: combine identical clauses in port write John Snow
2018-05-25 23:54 ` [Qemu-devel] [PATCH 06/16] ahci: modify ahci_port_write to use register numbers John Snow
2018-05-25 23:55 ` [Qemu-devel] [PATCH 07/16] ahci: make port write traces more descriptive John Snow
2018-05-25 23:55 ` [Qemu-devel] [PATCH 08/16] ahci: delete old port register address definitions John Snow
2018-05-25 23:55 ` [Qemu-devel] [PATCH 09/16] ahci: add host register enumeration John Snow
2018-05-25 23:55 ` [Qemu-devel] [PATCH 10/16] ahci: fix host register max address John Snow
2018-05-25 23:55 ` [Qemu-devel] [PATCH 11/16] ahci: modify ahci_mem_read_32 to work on register numbers John Snow
2018-05-25 23:55 ` [Qemu-devel] [PATCH 12/16] ahci: make mem_read_32 traces more descriptive John Snow
2018-05-25 23:55 ` [Qemu-devel] [PATCH 13/16] ahci: fix spacing damage on ahci_mem_write John Snow
2018-05-25 23:55 ` [Qemu-devel] [PATCH 14/16] ahci: adjust ahci_mem_write to work on registers John Snow
2018-05-25 23:55 ` [Qemu-devel] [PATCH 15/16] ahci: delete old host register address definitions John Snow
2018-05-25 23:55 ` [Qemu-devel] [PATCH 16/16] ahci: make ahci_mem_write traces more descriptive John Snow
2018-05-26 0:11 ` [Qemu-devel] [PATCH 00/16] AHCI: tracing improvements no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180525235509.11282-2-jsnow@redhat.com \
--to=jsnow@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).