qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Laurent Vivier <laurent@vivier.eu>
To: qemu-devel@nongnu.org
Cc: Laurent Vivier <laurent@vivier.eu>, Riku Voipio <riku.voipio@iki.fi>
Subject: [Qemu-devel] [PATCH 11/15] linux-user: move mips signal definitions to mips/target_signal.h
Date: Tue, 29 May 2018 21:42:03 +0200	[thread overview]
Message-ID: <20180529194207.31503-12-laurent@vivier.eu> (raw)
In-Reply-To: <20180529194207.31503-1-laurent@vivier.eu>

No code change.

Signed-off-by: Laurent Vivier <laurent@vivier.eu>
---
 linux-user/mips/target_signal.h   | 50 ++++++++++++++++++++++++++++++++++
 linux-user/mips64/target_signal.h | 49 ++++++++++++++++++++++++++++++++++
 linux-user/syscall_defs.h         | 56 +--------------------------------------
 3 files changed, 100 insertions(+), 55 deletions(-)

diff --git a/linux-user/mips/target_signal.h b/linux-user/mips/target_signal.h
index 5f68bd7634..66e1ad44a6 100644
--- a/linux-user/mips/target_signal.h
+++ b/linux-user/mips/target_signal.h
@@ -1,6 +1,47 @@
 #ifndef MIPS_TARGET_SIGNAL_H
 #define MIPS_TARGET_SIGNAL_H
 
+#define TARGET_SIGHUP            1      /* Hangup (POSIX).  */
+#define TARGET_SIGINT            2      /* Interrupt (ANSI).  */
+#define TARGET_SIGQUIT           3      /* Quit (POSIX).  */
+#define TARGET_SIGILL            4      /* Illegal instruction (ANSI).  */
+#define TARGET_SIGTRAP           5      /* Trace trap (POSIX).  */
+#define TARGET_SIGIOT            6      /* IOT trap (4.2 BSD).  */
+#define TARGET_SIGABRT           TARGET_SIGIOT  /* Abort (ANSI).  */
+#define TARGET_SIGEMT            7
+#define TARGET_SIGSTKFLT         7 /* XXX: incorrect */
+#define TARGET_SIGFPE            8      /* Floating-point exception (ANSI).  */
+#define TARGET_SIGKILL           9      /* Kill, unblockable (POSIX).  */
+#define TARGET_SIGBUS           10      /* BUS error (4.2 BSD).  */
+#define TARGET_SIGSEGV          11      /* Segmentation violation (ANSI).  */
+#define TARGET_SIGSYS           12
+#define TARGET_SIGPIPE          13      /* Broken pipe (POSIX).  */
+#define TARGET_SIGALRM          14      /* Alarm clock (POSIX).  */
+#define TARGET_SIGTERM          15      /* Termination (ANSI).  */
+#define TARGET_SIGUSR1          16      /* User-defined signal 1 (POSIX).  */
+#define TARGET_SIGUSR2          17      /* User-defined signal 2 (POSIX).  */
+#define TARGET_SIGCHLD          18      /* Child status has changed (POSIX).  */
+#define TARGET_SIGCLD           TARGET_SIGCHLD  /* Same as TARGET_SIGCHLD (System V).  */
+#define TARGET_SIGPWR           19      /* Power failure restart (System V).  */
+#define TARGET_SIGWINCH 20      /* Window size change (4.3 BSD, Sun).  */
+#define TARGET_SIGURG           21      /* Urgent condition on socket (4.2 BSD).  */
+#define TARGET_SIGIO            22      /* I/O now possible (4.2 BSD).  */
+#define TARGET_SIGPOLL          TARGET_SIGIO    /* Pollable event occurred (System V).  */
+#define TARGET_SIGSTOP          23      /* Stop, unblockable (POSIX).  */
+#define TARGET_SIGTSTP          24      /* Keyboard stop (POSIX).  */
+#define TARGET_SIGCONT          25      /* Continue (POSIX).  */
+#define TARGET_SIGTTIN          26      /* Background read from tty (POSIX).  */
+#define TARGET_SIGTTOU          27      /* Background write to tty (POSIX).  */
+#define TARGET_SIGVTALRM        28      /* Virtual alarm clock (4.2 BSD).  */
+#define TARGET_SIGPROF          29      /* Profiling alarm clock (4.2 BSD).  */
+#define TARGET_SIGXCPU          30      /* CPU limit exceeded (4.2 BSD).  */
+#define TARGET_SIGXFSZ          31      /* File size limit exceeded (4.2 BSD).  */
+#define TARGET_SIGRTMIN         32
+
+#define TARGET_SIG_BLOCK        1       /* for blocking signals */
+#define TARGET_SIG_UNBLOCK      2       /* for unblocking signals */
+#define TARGET_SIG_SETMASK      3       /* for setting the signal mask */
+
 /* this struct defines a stack used during syscall handling */
 
 typedef struct target_sigaltstack {
@@ -16,6 +57,15 @@ typedef struct target_sigaltstack {
 #define TARGET_SS_ONSTACK     1
 #define TARGET_SS_DISABLE     2
 
+#define TARGET_SA_NOCLDSTOP     0x00000001
+#define TARGET_SA_NOCLDWAIT     0x00010000
+#define TARGET_SA_SIGINFO       0x00000008
+#define TARGET_SA_ONSTACK       0x08000000
+#define TARGET_SA_NODEFER       0x40000000
+#define TARGET_SA_RESTART       0x10000000
+#define TARGET_SA_RESETHAND     0x80000000
+#define TARGET_SA_RESTORER      0x04000000      /* Only for O32 */
+
 #define TARGET_MINSIGSTKSZ    2048
 #define TARGET_SIGSTKSZ       8192
 
diff --git a/linux-user/mips64/target_signal.h b/linux-user/mips64/target_signal.h
index 7fe6b2f517..753e91fbd6 100644
--- a/linux-user/mips64/target_signal.h
+++ b/linux-user/mips64/target_signal.h
@@ -1,6 +1,47 @@
 #ifndef MIPS64_TARGET_SIGNAL_H
 #define MIPS64_TARGET_SIGNAL_H
 
+#define TARGET_SIGHUP            1      /* Hangup (POSIX).  */
+#define TARGET_SIGINT            2      /* Interrupt (ANSI).  */
+#define TARGET_SIGQUIT           3      /* Quit (POSIX).  */
+#define TARGET_SIGILL            4      /* Illegal instruction (ANSI).  */
+#define TARGET_SIGTRAP           5      /* Trace trap (POSIX).  */
+#define TARGET_SIGIOT            6      /* IOT trap (4.2 BSD).  */
+#define TARGET_SIGABRT           TARGET_SIGIOT  /* Abort (ANSI).  */
+#define TARGET_SIGEMT            7
+#define TARGET_SIGSTKFLT         7 /* XXX: incorrect */
+#define TARGET_SIGFPE            8      /* Floating-point exception (ANSI).  */
+#define TARGET_SIGKILL           9      /* Kill, unblockable (POSIX).  */
+#define TARGET_SIGBUS           10      /* BUS error (4.2 BSD).  */
+#define TARGET_SIGSEGV          11      /* Segmentation violation (ANSI).  */
+#define TARGET_SIGSYS           12
+#define TARGET_SIGPIPE          13      /* Broken pipe (POSIX).  */
+#define TARGET_SIGALRM          14      /* Alarm clock (POSIX).  */
+#define TARGET_SIGTERM          15      /* Termination (ANSI).  */
+#define TARGET_SIGUSR1          16      /* User-defined signal 1 (POSIX).  */
+#define TARGET_SIGUSR2          17      /* User-defined signal 2 (POSIX).  */
+#define TARGET_SIGCHLD          18      /* Child status has changed (POSIX).  */
+#define TARGET_SIGCLD           TARGET_SIGCHLD  /* Same as TARGET_SIGCHLD (System V).  */
+#define TARGET_SIGPWR           19      /* Power failure restart (System V).  */
+#define TARGET_SIGWINCH 20      /* Window size change (4.3 BSD, Sun).  */
+#define TARGET_SIGURG           21      /* Urgent condition on socket (4.2 BSD).  */
+#define TARGET_SIGIO            22      /* I/O now possible (4.2 BSD).  */
+#define TARGET_SIGPOLL          TARGET_SIGIO    /* Pollable event occurred (System V).  */
+#define TARGET_SIGSTOP          23      /* Stop, unblockable (POSIX).  */
+#define TARGET_SIGTSTP          24      /* Keyboard stop (POSIX).  */
+#define TARGET_SIGCONT          25      /* Continue (POSIX).  */
+#define TARGET_SIGTTIN          26      /* Background read from tty (POSIX).  */
+#define TARGET_SIGTTOU          27      /* Background write to tty (POSIX).  */
+#define TARGET_SIGVTALRM        28      /* Virtual alarm clock (4.2 BSD).  */
+#define TARGET_SIGPROF          29      /* Profiling alarm clock (4.2 BSD).  */
+#define TARGET_SIGXCPU          30      /* CPU limit exceeded (4.2 BSD).  */
+#define TARGET_SIGXFSZ          31      /* File size limit exceeded (4.2 BSD).  */
+#define TARGET_SIGRTMIN         32
+
+#define TARGET_SIG_BLOCK        1       /* for blocking signals */
+#define TARGET_SIG_UNBLOCK      2       /* for unblocking signals */
+#define TARGET_SIG_SETMASK      3       /* for setting the signal mask */
+
 /* this struct defines a stack used during syscall handling */
 
 typedef struct target_sigaltstack {
@@ -16,6 +57,14 @@ typedef struct target_sigaltstack {
 #define TARGET_SS_ONSTACK     1
 #define TARGET_SS_DISABLE     2
 
+#define TARGET_SA_NOCLDSTOP     0x00000001
+#define TARGET_SA_NOCLDWAIT     0x00010000
+#define TARGET_SA_SIGINFO       0x00000008
+#define TARGET_SA_ONSTACK       0x08000000
+#define TARGET_SA_NODEFER       0x40000000
+#define TARGET_SA_RESTART       0x10000000
+#define TARGET_SA_RESETHAND     0x80000000
+
 #define TARGET_MINSIGSTKSZ    2048
 #define TARGET_SIGSTKSZ       8192
 
diff --git a/linux-user/syscall_defs.h b/linux-user/syscall_defs.h
index 0034156c6b..21d3ef5559 100644
--- a/linux-user/syscall_defs.h
+++ b/linux-user/syscall_defs.h
@@ -426,18 +426,7 @@ int do_sigaction(int sig, const struct target_sigaction *act,
     || defined(TARGET_TILEGX) || defined(TARGET_HPPA) || defined(TARGET_NIOS2) \
     || defined(TARGET_RISCV) || defined(TARGET_XTENSA)
 
-#if defined(TARGET_MIPS)
-#define TARGET_SA_NOCLDSTOP	0x00000001
-#define TARGET_SA_NOCLDWAIT	0x00010000
-#define TARGET_SA_SIGINFO	0x00000008
-#define TARGET_SA_ONSTACK	0x08000000
-#define TARGET_SA_NODEFER	0x40000000
-#define TARGET_SA_RESTART	0x10000000
-#define TARGET_SA_RESETHAND	0x80000000
-#if !defined(TARGET_ABI_MIPSN32) && !defined(TARGET_ABI_MIPSN64)
-#define TARGET_SA_RESTORER	0x04000000	/* Only for O32 */
-#endif
-#elif defined(TARGET_OPENRISC)
+#if defined(TARGET_OPENRISC)
 #define TARGET_SA_NOCLDSTOP    0x00000001
 #define TARGET_SA_NOCLDWAIT    0x00000002
 #define TARGET_SA_SIGINFO      0x00000004
@@ -508,49 +497,6 @@ int do_sigaction(int sig, const struct target_sigaction *act,
 #define TARGET_SIG_UNBLOCK       2
 #define TARGET_SIG_SETMASK       3
 
-#elif defined(TARGET_MIPS)
-
-#define TARGET_SIGHUP		 1	/* Hangup (POSIX).  */
-#define TARGET_SIGINT		 2	/* Interrupt (ANSI).  */
-#define TARGET_SIGQUIT		 3	/* Quit (POSIX).  */
-#define TARGET_SIGILL		 4	/* Illegal instruction (ANSI).  */
-#define TARGET_SIGTRAP		 5	/* Trace trap (POSIX).  */
-#define TARGET_SIGIOT		 6	/* IOT trap (4.2 BSD).  */
-#define TARGET_SIGABRT		 TARGET_SIGIOT	/* Abort (ANSI).  */
-#define TARGET_SIGEMT		 7
-#define TARGET_SIGSTKFLT	 7 /* XXX: incorrect */
-#define TARGET_SIGFPE		 8	/* Floating-point exception (ANSI).  */
-#define TARGET_SIGKILL		 9	/* Kill, unblockable (POSIX).  */
-#define TARGET_SIGBUS		10	/* BUS error (4.2 BSD).  */
-#define TARGET_SIGSEGV		11	/* Segmentation violation (ANSI).  */
-#define TARGET_SIGSYS		12
-#define TARGET_SIGPIPE		13	/* Broken pipe (POSIX).  */
-#define TARGET_SIGALRM		14	/* Alarm clock (POSIX).  */
-#define TARGET_SIGTERM		15	/* Termination (ANSI).  */
-#define TARGET_SIGUSR1		16	/* User-defined signal 1 (POSIX).  */
-#define TARGET_SIGUSR2		17	/* User-defined signal 2 (POSIX).  */
-#define TARGET_SIGCHLD		18	/* Child status has changed (POSIX).  */
-#define TARGET_SIGCLD		TARGET_SIGCHLD	/* Same as TARGET_SIGCHLD (System V).  */
-#define TARGET_SIGPWR		19	/* Power failure restart (System V).  */
-#define TARGET_SIGWINCH	20	/* Window size change (4.3 BSD, Sun).  */
-#define TARGET_SIGURG		21	/* Urgent condition on socket (4.2 BSD).  */
-#define TARGET_SIGIO		22	/* I/O now possible (4.2 BSD).  */
-#define TARGET_SIGPOLL		TARGET_SIGIO	/* Pollable event occurred (System V).  */
-#define TARGET_SIGSTOP		23	/* Stop, unblockable (POSIX).  */
-#define TARGET_SIGTSTP		24	/* Keyboard stop (POSIX).  */
-#define TARGET_SIGCONT		25	/* Continue (POSIX).  */
-#define TARGET_SIGTTIN		26	/* Background read from tty (POSIX).  */
-#define TARGET_SIGTTOU		27	/* Background write to tty (POSIX).  */
-#define TARGET_SIGVTALRM	28	/* Virtual alarm clock (4.2 BSD).  */
-#define TARGET_SIGPROF		29	/* Profiling alarm clock (4.2 BSD).  */
-#define TARGET_SIGXCPU		30	/* CPU limit exceeded (4.2 BSD).  */
-#define TARGET_SIGXFSZ		31	/* File size limit exceeded (4.2 BSD).  */
-#define TARGET_SIGRTMIN         32
-
-#define TARGET_SIG_BLOCK	1	/* for blocking signals */
-#define TARGET_SIG_UNBLOCK	2	/* for unblocking signals */
-#define TARGET_SIG_SETMASK	3	/* for setting the signal mask */
-
 #elif defined(TARGET_HPPA)
 
 #define TARGET_SIGHUP           1
-- 
2.14.3

  parent reply	other threads:[~2018-05-29 19:42 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-29 19:41 [Qemu-devel] [PATCH 00/15] linux-user: move more definitions out of syscall_defs.h Laurent Vivier
2018-05-29 19:41 ` [Qemu-devel] [PATCH 01/15] linux-user: move generic fcntl definitions to generic/fcntl.h Laurent Vivier
2018-05-29 19:41 ` [Qemu-devel] [PATCH 02/15] linux-user: move alpha fcntl definitions to alpha/target_fcntl.h Laurent Vivier
2018-05-30 21:50   ` Richard Henderson
2018-05-29 19:41 ` [Qemu-devel] [PATCH 03/15] linux-user: move hppa fcntl definitions to hppa/target_fcntl.h Laurent Vivier
2018-05-30 21:51   ` Richard Henderson
2018-05-29 19:41 ` [Qemu-devel] [PATCH 04/15] linux-user: move arm/aarch64/m68k fcntl definitions to [arm|aarch64|m68k]/target_fcntl.h Laurent Vivier
2018-05-30 21:52   ` Richard Henderson
2018-05-29 19:41 ` [Qemu-devel] [PATCH 05/15] linux-user: move mips/mips64 fcntl definitions to mips/target_fcntl.h Laurent Vivier
2018-05-29 19:41 ` [Qemu-devel] [PATCH 06/15] linux-user: move ppc fcntl definitions to ppc/target_fcntl.h Laurent Vivier
2018-05-29 19:41 ` [Qemu-devel] [PATCH 07/15] linux-user: move sparc/sparc64 fcntl definitions to sparc/target_fcntl.h Laurent Vivier
2018-05-29 19:42 ` [Qemu-devel] [PATCH 08/15] linux-user: move get_sp_from_cpustate() to target_cpu.h Laurent Vivier
2018-05-30 21:59   ` Richard Henderson
2018-05-29 19:42 ` [Qemu-devel] [PATCH 09/15] linux-user: move generic signal definitions to generic/signal.h Laurent Vivier
2018-05-29 19:42 ` [Qemu-devel] [PATCH 10/15] linux-user: move sparc signal definitions to sparc/target_signal.h Laurent Vivier
2018-05-29 19:42 ` Laurent Vivier [this message]
2018-05-29 19:42 ` [Qemu-devel] [PATCH 12/15] linux-user: move openrisc signal definitions to openrisc/target_signal.h Laurent Vivier
2018-05-29 19:42 ` [Qemu-devel] [PATCH 13/15] linux-user: move alpha signal definitions to alpha/target_signal.h Laurent Vivier
2018-05-29 19:42 ` [Qemu-devel] [PATCH 14/15] linux-user: move hppa signal definitions to hppa/target_signal.h Laurent Vivier
2018-05-29 19:42 ` [Qemu-devel] [PATCH 15/15] linux-user: remove useless #if Laurent Vivier
2018-05-29 20:02 ` [Qemu-devel] [PATCH 00/15] linux-user: move more definitions out of syscall_defs.h no-reply
2018-05-30 22:06 ` Richard Henderson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180529194207.31503-12-laurent@vivier.eu \
    --to=laurent@vivier.eu \
    --cc=qemu-devel@nongnu.org \
    --cc=riku.voipio@iki.fi \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).