From: Paolo Bonzini <pbonzini@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com>
Subject: [Qemu-devel] [PULL 39/53] ipmi: Use proper struct reference for KCS vmstate
Date: Thu, 31 May 2018 19:15:52 +0200 [thread overview]
Message-ID: <20180531171606.21604-1-pbonzini@redhat.com> (raw)
In-Reply-To: <20180531171253.21012-1-pbonzini@redhat.com>
From: Corey Minyard <cminyard@mvista.com>
The vmstate for isa_ipmi_kcs was referencing into the kcs structure,
instead create a kcs structure separate and use that.
There were also some issues in the state transfer. The inlen field
was not being transferred, so if a transaction was in process during
the transfer it would be messed up. And the use_irq field was
transferred, but that should come from the configuration.
To fix this, the new VMS_VSTRUCT macros are used so the exact
version of the structure can be specified, depending on what
version was being received. So an upgrade should work for KCS.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1524670052-28373-3-git-send-email-minyard@acm.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
hw/ipmi/isa_ipmi_kcs.c | 81 ++++++++++++++++++++++++++++++++++--------
1 file changed, 66 insertions(+), 15 deletions(-)
diff --git a/hw/ipmi/isa_ipmi_kcs.c b/hw/ipmi/isa_ipmi_kcs.c
index 689587b65d..a79431554a 100644
--- a/hw/ipmi/isa_ipmi_kcs.c
+++ b/hw/ipmi/isa_ipmi_kcs.c
@@ -22,6 +22,7 @@
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
+#include "qemu/log.h"
#include "qapi/error.h"
#include "hw/hw.h"
#include "hw/ipmi/ipmi.h"
@@ -422,24 +423,69 @@ static void ipmi_isa_realize(DeviceState *dev, Error **errp)
isa_register_ioport(isadev, &iik->kcs.io, iik->kcs.io_base);
}
-const VMStateDescription vmstate_ISAIPMIKCSDevice = {
+static int ipmi_kcs_vmstate_post_load(void *opaque, int version)
+{
+ IPMIKCS *ik = opaque;
+
+ /* Make sure all the values are sane. */
+ if (ik->outpos >= MAX_IPMI_MSG_SIZE || ik->outlen >= MAX_IPMI_MSG_SIZE ||
+ ik->outpos >= ik->outlen) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "ipmi:kcs: vmstate transfer received bad out values: %d %d\n",
+ ik->outpos, ik->outlen);
+ ik->outpos = 0;
+ ik->outlen = 0;
+ }
+
+ if (ik->inlen >= MAX_IPMI_MSG_SIZE) {
+ qemu_log_mask(LOG_GUEST_ERROR,
+ "ipmi:kcs: vmstate transfer received bad in value: %d\n",
+ ik->inlen);
+ ik->inlen = 0;
+ }
+
+ return 0;
+}
+
+static bool vmstate_kcs_before_version2(void *opaque, int version)
+{
+ return version <= 1;
+}
+
+static const VMStateDescription vmstate_IPMIKCS = {
+ .name = TYPE_IPMI_INTERFACE_PREFIX "kcs",
+ .version_id = 2,
+ .minimum_version_id = 1,
+ .post_load = ipmi_kcs_vmstate_post_load,
+ .fields = (VMStateField[]) {
+ VMSTATE_BOOL(obf_irq_set, IPMIKCS),
+ VMSTATE_BOOL(atn_irq_set, IPMIKCS),
+ VMSTATE_UNUSED_TEST(vmstate_kcs_before_version2, 1), /* Was use_irq */
+ VMSTATE_BOOL(irqs_enabled, IPMIKCS),
+ VMSTATE_UINT32(outpos, IPMIKCS),
+ VMSTATE_UINT32_V(outlen, IPMIKCS, 2),
+ VMSTATE_UINT8_ARRAY(outmsg, IPMIKCS, MAX_IPMI_MSG_SIZE),
+ VMSTATE_UINT32_V(inlen, IPMIKCS, 2),
+ VMSTATE_UINT8_ARRAY(inmsg, IPMIKCS, MAX_IPMI_MSG_SIZE),
+ VMSTATE_BOOL(write_end, IPMIKCS),
+ VMSTATE_UINT8(status_reg, IPMIKCS),
+ VMSTATE_UINT8(data_out_reg, IPMIKCS),
+ VMSTATE_INT16(data_in_reg, IPMIKCS),
+ VMSTATE_INT16(cmd_reg, IPMIKCS),
+ VMSTATE_UINT8(waiting_rsp, IPMIKCS),
+ VMSTATE_END_OF_LIST()
+ }
+};
+
+static const VMStateDescription vmstate_ISAIPMIKCSDevice = {
.name = TYPE_IPMI_INTERFACE,
- .version_id = 1,
+ .version_id = 2,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
- VMSTATE_BOOL(kcs.obf_irq_set, ISAIPMIKCSDevice),
- VMSTATE_BOOL(kcs.atn_irq_set, ISAIPMIKCSDevice),
- VMSTATE_BOOL(kcs.use_irq, ISAIPMIKCSDevice),
- VMSTATE_BOOL(kcs.irqs_enabled, ISAIPMIKCSDevice),
- VMSTATE_UINT32(kcs.outpos, ISAIPMIKCSDevice),
- VMSTATE_UINT8_ARRAY(kcs.outmsg, ISAIPMIKCSDevice, MAX_IPMI_MSG_SIZE),
- VMSTATE_UINT8_ARRAY(kcs.inmsg, ISAIPMIKCSDevice, MAX_IPMI_MSG_SIZE),
- VMSTATE_BOOL(kcs.write_end, ISAIPMIKCSDevice),
- VMSTATE_UINT8(kcs.status_reg, ISAIPMIKCSDevice),
- VMSTATE_UINT8(kcs.data_out_reg, ISAIPMIKCSDevice),
- VMSTATE_INT16(kcs.data_in_reg, ISAIPMIKCSDevice),
- VMSTATE_INT16(kcs.cmd_reg, ISAIPMIKCSDevice),
- VMSTATE_UINT8(kcs.waiting_rsp, ISAIPMIKCSDevice),
+ VMSTATE_VSTRUCT_TEST(kcs, ISAIPMIKCSDevice, vmstate_kcs_before_version2,
+ 0, vmstate_IPMIKCS, IPMIKCS, 1),
+ VMSTATE_VSTRUCT_V(kcs, ISAIPMIKCSDevice, 2, vmstate_IPMIKCS,
+ IPMIKCS, 2),
VMSTATE_END_OF_LIST()
}
};
@@ -450,6 +496,11 @@ static void isa_ipmi_kcs_init(Object *obj)
ipmi_bmc_find_and_link(obj, (Object **) &iik->kcs.bmc);
+ /*
+ * Version 1 had an incorrect name, it clashed with the BT
+ * IPMI device, so receive it, but transmit a different
+ * version.
+ */
vmstate_register(NULL, 0, &vmstate_ISAIPMIKCSDevice, iik);
}
--
2.17.0
next prev parent reply other threads:[~2018-05-31 17:16 UTC|newest]
Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-31 17:12 [Qemu-devel] [PULL 00/53] Misc patches for 2018-05-31 Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 01/53] sandbox: disable -sandbox if CONFIG_SECCOMP undefined Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 02/53] vfio: Include "exec/address-spaces.h" directly in the source file Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 03/53] accel: Do not include "exec/address-spaces.h" if it is not necessary Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 04/53] target: " Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 05/53] memory: Do not include "exec/ioport.h" " Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 06/53] target/i386: " Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 07/53] target/xtensa: Include "qemu/timer.h" to use NANOSECONDS_PER_SECOND Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 08/53] target/ppc: Include "exec/exec-all.h" which provides tlb_flush() Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 09/53] target/hppa: Include "qemu/log.h" to use qemu_log() Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 10/53] target: Do not include "exec/exec-all.h" if it is not necessary Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 11/53] nios2: do not include exec-all.h from cpu.h Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 12/53] hw: Do not include "exec/ioport.h" if it is not necessary Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 13/53] hw: Do not include "exec/address-spaces.h" " Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 14/53] hw: Do not include "sysemu/block-backend.h" " Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 15/53] hw: Do not include "sysemu/blockdev.h" " Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 16/53] " Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 17/53] hw/block/nvme: Include "qemu/cutils.h" directly in the source file Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 18/53] hw/misc/mips_itu: Cleanup includes Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 19/53] hw/misc/sga: Use the correct ISA include Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 20/53] hw/hppa: Remove unused include Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 21/53] hw/i386/pc: " Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 22/53] hw/ide: " Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 23/53] hw: Clean "hw/devices.h" includes Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 24/53] qom: Document qom/device-list-properties implementation specific Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 25/53] qom: support orphan objects in object_get_canonical_path Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 26/53] virtio: free MemoryRegionCache when initialization fails Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 27/53] memory.h: Fix typo in documentation comment Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 28/53] memory: get rid of memory_region_init_reservation Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 29/53] memory: delete struct AddressSpaceOps Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 30/53] hw/isa/superio: Fix inconsistent use of Chardev->be Paolo Bonzini
2018-05-31 18:08 ` Philippe Mathieu-Daudé
2018-05-31 17:12 ` [Qemu-devel] [PULL 31/53] mux: fix ctrl-a b again Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 32/53] memfd: Avoid Coverity warning about integer overflow Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 33/53] exec.c: Initialize sa_flags passed to sigaction() Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 34/53] WHPX: dynamically load WHP libraries Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 35/53] WHPX: fix some compiler warnings Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 36/53] qemu-options: Mark the non-functional -clock option as deprecated Paolo Bonzini
2018-05-31 17:12 ` [Qemu-devel] [PULL 37/53] tcg: remove softfloat from --disable-tcg builds Paolo Bonzini
2018-05-31 17:15 ` Paolo Bonzini [this message]
2018-05-31 17:15 ` [Qemu-devel] [PULL 40/53] docs/interop: add "firmware.json" Paolo Bonzini
2018-05-31 19:07 ` Eric Blake
2018-05-31 17:15 ` [Qemu-devel] [PULL 41/53] gdbstub: Prevent fd leakage Paolo Bonzini
2018-05-31 17:15 ` [Qemu-devel] [PULL 42/53] virtio-gpu-3d: Define VIRTIO_GPU_CAPSET_VIRGL2 elsewhere Paolo Bonzini
2018-05-31 17:15 ` [Qemu-devel] [PULL 43/53] scripts/update-linux-headers: Handle __aligned_u64 Paolo Bonzini
2018-05-31 17:15 ` [Qemu-devel] [PULL 44/53] scripts/update-linux-headers: Handle kernel license no longer being one file Paolo Bonzini
2018-05-31 17:15 ` [Qemu-devel] [PULL 45/53] target/i386/kvm.c: Handle renaming of KVM_HINTS_DEDICATED Paolo Bonzini
2018-05-31 17:15 ` [Qemu-devel] [PULL 46/53] Update Linux headers to 4.17-rc6 Paolo Bonzini
2018-05-31 17:16 ` [Qemu-devel] [PULL 47/53] target/i386/kvm.c: Remove compatibility shim for KVM_HINTS_REALTIME Paolo Bonzini
2018-05-31 17:16 ` [Qemu-devel] [PULL 48/53] hw/i2c/smbus: Use DeviceClass::realize instead of SMBusDeviceClass::init Paolo Bonzini
2018-05-31 17:16 ` [Qemu-devel] [PULL 49/53] hw/i2c: Use DeviceClass::realize instead of I2CSlaveClass::init Paolo Bonzini
2018-05-31 17:16 ` [Qemu-devel] [PULL 50/53] qdev: Simplify the SysBusDeviceClass::init path Paolo Bonzini
2018-05-31 17:16 ` [Qemu-devel] [PULL 51/53] qdev: Remove DeviceClass::init() and ::exit() Paolo Bonzini
2018-05-31 17:16 ` [Qemu-devel] [PULL 52/53] char: Remove unwanted crlf conversion Paolo Bonzini
2018-06-08 17:39 ` Greg Kurz
2018-06-08 17:56 ` Philippe Mathieu-Daudé
2018-06-09 7:31 ` Greg Kurz
2018-06-08 18:08 ` Patryk Olszewski
2018-05-31 17:16 ` [Qemu-devel] [PULL 53/53] memory: Make operations using MemoryRegionIoeventfd struct pass by pointer Paolo Bonzini
2018-05-31 17:16 ` [Qemu-devel] [PULL 37/53] tcg: remove softfloat from --disable-tcg builds Paolo Bonzini
2018-05-31 17:16 ` [Qemu-devel] [PULL 38/53] vmstate: Add a VSTRUCT type Paolo Bonzini
2018-05-31 17:52 ` [Qemu-devel] [PULL 00/53] Misc patches for 2018-05-31 Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180531171606.21604-1-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=dgilbert@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).