qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Jeff Cody <jcody@redhat.com>
To: Eric Blake <eblake@redhat.com>
Cc: qemu-devel@nongnu.org, kwolf@redhat.com,
	Wen Congyang <wencongyang2@huawei.com>,
	Xie Changlong <xiechanglong.d@gmail.com>,
	qemu-block@nongnu.org, mreitz@redhat.com
Subject: Re: [Qemu-devel] [Qemu-block] [PATCH v2 6/8] replication: Switch to byte-based calls
Date: Thu, 31 May 2018 23:55:07 -0400	[thread overview]
Message-ID: <20180601035507.GF11303@localhost.localdomain> (raw)
In-Reply-To: <20180531205046.153256-7-eblake@redhat.com>

On Thu, May 31, 2018 at 03:50:44PM -0500, Eric Blake wrote:
> We are gradually moving away from sector-based interfaces, towards
> byte-based.  Make the change for the last few sector-based calls
> into the block layer from the replication driver.
> 
> Ideally, the replication driver should switch to doing everything
> byte-based, but that's a more invasive change that requires a
> bit more auditing.
> 
> Signed-off-by: Eric Blake <eblake@redhat.com>

Reviewed-by: Jeff Cody <jcody@redhat.com>

> ---
>  block/replication.c | 14 ++++++++------
>  1 file changed, 8 insertions(+), 6 deletions(-)
> 
> diff --git a/block/replication.c b/block/replication.c
> index 826db7b3049..6349d6958e4 100644
> --- a/block/replication.c
> +++ b/block/replication.c
> @@ -246,13 +246,14 @@ static coroutine_fn int replication_co_readv(BlockDriverState *bs,
>          backup_cow_request_begin(&req, child->bs->job,
>                                   sector_num * BDRV_SECTOR_SIZE,
>                                   remaining_bytes);
> -        ret = bdrv_co_readv(bs->file, sector_num, remaining_sectors,
> -                            qiov);
> +        ret = bdrv_co_preadv(bs->file, sector_num * BDRV_SECTOR_SIZE,
> +                             remaining_bytes, qiov, 0);
>          backup_cow_request_end(&req);
>          goto out;
>      }
> 
> -    ret = bdrv_co_readv(bs->file, sector_num, remaining_sectors, qiov);
> +    ret = bdrv_co_preadv(bs->file, sector_num * BDRV_SECTOR_SIZE,
> +                         remaining_sectors * BDRV_SECTOR_SIZE, qiov, 0);
>  out:
>      return replication_return_value(s, ret);
>  }
> @@ -279,8 +280,8 @@ static coroutine_fn int replication_co_writev(BlockDriverState *bs,
>      }
> 
>      if (ret == 0) {
> -        ret = bdrv_co_writev(top, sector_num,
> -                             remaining_sectors, qiov);
> +        ret = bdrv_co_pwritev(top, sector_num * BDRV_SECTOR_SIZE,
> +                              remaining_sectors * BDRV_SECTOR_SIZE, qiov, 0);
>          return replication_return_value(s, ret);
>      }
> 
> @@ -306,7 +307,8 @@ static coroutine_fn int replication_co_writev(BlockDriverState *bs,
>          qemu_iovec_concat(&hd_qiov, qiov, bytes_done, count);
> 
>          target = ret ? top : base;
> -        ret = bdrv_co_writev(target, sector_num, n, &hd_qiov);
> +        ret = bdrv_co_pwritev(target, sector_num * BDRV_SECTOR_SIZE,
> +                              n * BDRV_SECTOR_SIZE, &hd_qiov, 0);
>          if (ret < 0) {
>              goto out1;
>          }
> -- 
> 2.14.3
> 
> 

  reply	other threads:[~2018-06-01  3:55 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-31 20:50 [Qemu-devel] [PATCH v2 0/8] block: more byte-based cleanups: vectored I/O Eric Blake
2018-05-31 20:50 ` [Qemu-devel] [PATCH v2 1/8] parallels: Switch to byte-based calls Eric Blake
2018-06-01  2:19   ` [Qemu-devel] [Qemu-block] " Jeff Cody
2018-05-31 20:50 ` [Qemu-devel] [PATCH v2 2/8] qcow: Switch get_cluster_offset to be byte-based Eric Blake
2018-06-04 20:41   ` [Qemu-devel] [Qemu-block] " Jeff Cody
2018-05-31 20:50 ` [Qemu-devel] [PATCH v2 3/8] qcow: Switch qcow_co_readv to byte-based calls Eric Blake
2018-06-04 21:17   ` [Qemu-devel] [Qemu-block] " Jeff Cody
2018-05-31 20:50 ` [Qemu-devel] [PATCH v2 4/8] qcow: Switch qcow_co_writev " Eric Blake
2018-06-04 21:27   ` [Qemu-devel] [Qemu-block] " Jeff Cody
2018-05-31 20:50 ` [Qemu-devel] [PATCH v2 5/8] qcow: Switch to a byte-based driver Eric Blake
2018-06-04 21:33   ` [Qemu-devel] [Qemu-block] " Jeff Cody
2018-06-05 11:12     ` Eric Blake
2018-06-05 13:36       ` Jeff Cody
2018-05-31 20:50 ` [Qemu-devel] [PATCH v2 6/8] replication: Switch to byte-based calls Eric Blake
2018-06-01  3:55   ` Jeff Cody [this message]
2018-05-31 20:50 ` [Qemu-devel] [PATCH v2 7/8] vhdx: " Eric Blake
2018-06-01  2:42   ` Jeff Cody
2018-05-31 20:50 ` [Qemu-devel] [PATCH v2 8/8] block: Remove unused sector-based vectored I/O Eric Blake
2018-06-01  3:55   ` [Qemu-devel] [Qemu-block] " Jeff Cody

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180601035507.GF11303@localhost.localdomain \
    --to=jcody@redhat.com \
    --cc=eblake@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=wencongyang2@huawei.com \
    --cc=xiechanglong.d@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).