From: Richard Henderson <richard.henderson@linaro.org>
To: qemu-devel@nongnu.org
Cc: laurent@vivier.eu
Subject: [Qemu-devel] [PATCH 22/33] linux-user: Split out alarm, pause, stime, utime, utimes
Date: Fri, 1 Jun 2018 00:30:39 -0700 [thread overview]
Message-ID: <20180601073050.8054-23-richard.henderson@linaro.org> (raw)
In-Reply-To: <20180601073050.8054-1-richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
---
linux-user/syscall.c | 156 ++++++++++++++++++++++++++-----------------
1 file changed, 94 insertions(+), 62 deletions(-)
diff --git a/linux-user/syscall.c b/linux-user/syscall.c
index 53eac58ec0..b3838c5161 100644
--- a/linux-user/syscall.c
+++ b/linux-user/syscall.c
@@ -7894,6 +7894,13 @@ IMPL(enosys)
return do_unimplemented(num);
}
+#ifdef TARGET_NR_alarm
+IMPL(alarm)
+{
+ return alarm(arg1);
+}
+#endif
+
IMPL(brk)
{
return do_brk(arg1);
@@ -8379,6 +8386,18 @@ IMPL(open_by_handle_at)
}
#endif
+#ifdef TARGET_NR_pause
+IMPL(pause)
+{
+ CPUState *cpu = ENV_GET_CPU(cpu_env);
+
+ if (!block_signals()) {
+ sigsuspend(&((TaskState *)cpu->opaque)->signal_mask);
+ }
+ return -TARGET_EINTR;
+}
+#endif
+
IMPL(read)
{
abi_long ret;
@@ -8402,6 +8421,17 @@ IMPL(read)
return ret;
}
+#ifdef TARGET_NR_stime
+IMPL(stime)
+{
+ time_t host_time;
+ if (get_user_sal(host_time, arg1)) {
+ return -TARGET_EFAULT;
+ }
+ return get_errno(stime(&host_time));
+}
+#endif
+
#ifdef TARGET_NR_time
IMPL(time)
{
@@ -8463,6 +8493,55 @@ IMPL(unlinkat)
}
#endif
+#ifdef TARGET_NR_utime
+IMPL(utime)
+{
+ struct utimbuf tbuf;
+ char *p;
+ abi_long ret;
+
+ if (arg2) {
+ struct target_utimbuf *target_tbuf;
+ if (!lock_user_struct(VERIFY_READ, target_tbuf, arg2, 1)) {
+ return -TARGET_EFAULT;
+ }
+ tbuf.actime = tswapal(target_tbuf->actime);
+ tbuf.modtime = tswapal(target_tbuf->modtime);
+ unlock_user_struct(target_tbuf, arg2, 0);
+ }
+ p = lock_user_string(arg1);
+ if (!p) {
+ return -TARGET_EFAULT;
+ }
+ ret = get_errno(utime(p, arg2 ? &tbuf : NULL));
+ unlock_user(p, arg1, 0);
+ return ret;
+}
+#endif
+
+#ifdef TARGET_NR_utimes
+IMPL(utimes)
+{
+ struct timeval tv[2];
+ char *p;
+ abi_long ret;
+
+ if (arg2 &&
+ (copy_from_user_timeval(&tv[0], arg2) ||
+ copy_from_user_timeval(&tv[1],
+ arg2 + sizeof(struct target_timeval)))) {
+ return -TARGET_EFAULT;
+ }
+ p = lock_user_string(arg1);
+ if (!p) {
+ return -TARGET_EFAULT;
+ }
+ ret = get_errno(utimes(p, arg2 ? tv : NULL));
+ unlock_user(p, arg1, 0);
+ return ret;
+}
+#endif
+
#ifdef TARGET_NR_waitid
IMPL(waitid)
{
@@ -8539,68 +8618,6 @@ IMPL(everything_else)
char *fn;
switch(num) {
-#ifdef TARGET_NR_stime /* not on alpha */
- case TARGET_NR_stime:
- {
- time_t host_time;
- if (get_user_sal(host_time, arg1))
- return -TARGET_EFAULT;
- return get_errno(stime(&host_time));
- }
-#endif
-#ifdef TARGET_NR_alarm /* not on alpha */
- case TARGET_NR_alarm:
- return alarm(arg1);
-#endif
-#ifdef TARGET_NR_pause /* not on alpha */
- case TARGET_NR_pause:
- if (!block_signals()) {
- sigsuspend(&((TaskState *)cpu->opaque)->signal_mask);
- }
- return -TARGET_EINTR;
-#endif
-#ifdef TARGET_NR_utime
- case TARGET_NR_utime:
- {
- struct utimbuf tbuf, *host_tbuf;
- struct target_utimbuf *target_tbuf;
- if (arg2) {
- if (!lock_user_struct(VERIFY_READ, target_tbuf, arg2, 1))
- return -TARGET_EFAULT;
- tbuf.actime = tswapal(target_tbuf->actime);
- tbuf.modtime = tswapal(target_tbuf->modtime);
- unlock_user_struct(target_tbuf, arg2, 0);
- host_tbuf = &tbuf;
- } else {
- host_tbuf = NULL;
- }
- if (!(p = lock_user_string(arg1)))
- return -TARGET_EFAULT;
- ret = get_errno(utime(p, host_tbuf));
- unlock_user(p, arg1, 0);
- }
- return ret;
-#endif
-#ifdef TARGET_NR_utimes
- case TARGET_NR_utimes:
- {
- struct timeval *tvp, tv[2];
- if (arg2) {
- if (copy_from_user_timeval(&tv[0], arg2)
- || copy_from_user_timeval(&tv[1],
- arg2 + sizeof(struct target_timeval)))
- return -TARGET_EFAULT;
- tvp = tv;
- } else {
- tvp = NULL;
- }
- if (!(p = lock_user_string(arg1)))
- return -TARGET_EFAULT;
- ret = get_errno(utimes(p, tvp));
- unlock_user(p, arg1, 0);
- }
- return ret;
-#endif
#if defined(TARGET_NR_futimesat)
case TARGET_NR_futimesat:
if (is_hostfd(arg1)) {
@@ -12856,6 +12873,9 @@ IMPL(everything_else)
}
static impl_fn * const syscall_table[] = {
+#ifdef TARGET_NR_alarm
+ [TARGET_NR_alarm] = impl_alarm,
+#endif
[TARGET_NR_brk] = impl_brk,
[TARGET_NR_close] = impl_close,
[TARGET_NR_chdir] = impl_chdir,
@@ -12899,8 +12919,14 @@ static impl_fn * const syscall_table[] = {
[TARGET_NR_openat] = impl_openat,
#if defined(TARGET_NR_open_by_handle_at) && defined(CONFIG_OPEN_BY_HANDLE)
[TARGET_NR_open_by_handle_at] = impl_open_by_handle_at,
+#endif
+#ifdef TARGET_NR_pause
+ [TARGET_NR_pause] = impl_pause,
#endif
[TARGET_NR_read] = impl_read,
+#ifdef TARGET_NR_stime
+ [TARGET_NR_stime] = impl_stime,
+#endif
#ifdef TARGET_NR_time
[TARGET_NR_time] = impl_time,
#endif
@@ -12913,6 +12939,12 @@ static impl_fn * const syscall_table[] = {
#if TARGET_NR_unlinkat
[TARGET_NR_unlinkat] = impl_unlinkat,
#endif
+#ifdef TARGET_NR_utime
+ [TARGET_NR_utime] = impl_utime,
+#endif
+#ifdef TARGET_NR_utimes
+ [TARGET_NR_utimes] = impl_utimes,
+#endif
#ifdef TARGET_NR_waitid
[TARGET_NR_waitid] = impl_waitid,
#endif
--
2.17.0
next prev parent reply other threads:[~2018-06-01 7:31 UTC|newest]
Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-01 7:30 [Qemu-devel] [PATCH 00/33] linux-user: Begin splitting do_syscall Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 01/33] linux-user: Split out do_syscall1 Richard Henderson
2018-06-01 7:36 ` Laurent Vivier
2018-06-01 14:00 ` Eric Blake
2018-06-01 14:52 ` Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 02/33] linux-user: Relax single exit from "break" Richard Henderson
2018-06-04 19:29 ` Laurent Vivier
2018-06-01 7:30 ` [Qemu-devel] [PATCH 03/33] linux-user: Propagate goto ebadf to return Richard Henderson
2018-06-04 19:33 ` Laurent Vivier
2018-06-01 7:30 ` [Qemu-devel] [PATCH 04/33] linux-user: Propagate goto efault " Richard Henderson
2018-06-04 19:35 ` Laurent Vivier
2018-06-01 7:30 ` [Qemu-devel] [PATCH 05/33] linux-user: Propagate goto unimplemented_nowarn " Richard Henderson
2018-06-04 19:36 ` Laurent Vivier
2018-06-01 7:30 ` [Qemu-devel] [PATCH 06/33] linux-user: Split out goto unimplemented to do_unimplemented Richard Henderson
2018-06-04 19:38 ` Laurent Vivier
2018-06-01 7:30 ` [Qemu-devel] [PATCH 07/33] linux-user: Propagate goto fail to return Richard Henderson
2018-06-04 19:48 ` Laurent Vivier
2018-06-01 7:30 ` [Qemu-devel] [PATCH 08/33] linux-user: Make syscall number unsigned Richard Henderson
2018-06-04 19:50 ` Laurent Vivier
2018-06-01 7:30 ` [Qemu-devel] [PATCH 09/33] linux-user: Set up infrastructure for table-izing syscalls Richard Henderson
2018-06-04 19:55 ` Laurent Vivier
2018-06-01 7:30 ` [Qemu-devel] [PATCH 10/33] linux-user: Split out brk, close, exit, read, write Richard Henderson
2018-06-04 20:17 ` Laurent Vivier
2018-06-04 21:01 ` Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 11/33] linux-user: Split out execve Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 12/33] linux-user: Split out open, openat Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 13/33] linux-user: Split out name_to_handle_at Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 14/33] linux-user: Split out open_to_handle_at Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 15/33] linux-user: Split out creat, fork, waitid, waitpid Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 16/33] linux-user: Split out link, linkat Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 17/33] linux-user: Split out unlink, unlinkat Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 18/33] linux-user: Split out chdir, mknod, mknodat, time, chmod Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 19/33] linux-user: Remove all unimplemented entries Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 20/33] linux-user: Split out getpid, getxpid, lseek Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 21/33] linux-user: Split out mount, umount Richard Henderson
2018-06-01 7:30 ` Richard Henderson [this message]
2018-06-01 7:30 ` [Qemu-devel] [PATCH 23/33] linux-user: Split out access, faccessat, futimesat, kill, nice, sync, syncfs Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 24/33] linux-user: Split out rename, renameat, renameat2 Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 25/33] linux-user: Split out dup, mkdir, mkdirat, rmdir Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 26/33] linux-user: Split out acct, pipe, pipe2, times, umount2 Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 27/33] linux-user: Split out ioctl Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 28/33] linux-user: Split out chroot, dup2, dup3, fcntl, setpgid, umask Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 29/33] linux-user: Split out getpgrp, getppid, setsid Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 30/33] linux-user: Split out rt_sigaction, sigaction Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 31/33] linux-user: Split out rt_sigprocmask, sgetmask, sigprocmask, ssetmask Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 32/33] linux-user: Split out rt_sigpending, rt_sigsuspend, sigpending, sigsuspend Richard Henderson
2018-06-01 7:30 ` [Qemu-devel] [PATCH 33/33] linux-user: Split out rt_sigqueueinfo, rt_sigtimedwait, rt_tgsigqueueinfo Richard Henderson
2018-06-01 7:33 ` [Qemu-devel] [PATCH 00/33] linux-user: Begin splitting do_syscall Richard Henderson
2018-06-01 8:05 ` no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180601073050.8054-23-richard.henderson@linaro.org \
--to=richard.henderson@linaro.org \
--cc=laurent@vivier.eu \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).