From: Jeff Cody <jcody@redhat.com>
To: Eric Blake <eblake@redhat.com>
Cc: qemu-devel@nongnu.org, kwolf@redhat.com, qemu-block@nongnu.org,
mreitz@redhat.com
Subject: Re: [Qemu-devel] [Qemu-block] [PATCH v2 2/8] qcow: Switch get_cluster_offset to be byte-based
Date: Mon, 4 Jun 2018 16:41:09 -0400 [thread overview]
Message-ID: <20180604204109.GC14298@localhost.localdomain> (raw)
In-Reply-To: <20180531205046.153256-3-eblake@redhat.com>
On Thu, May 31, 2018 at 03:50:40PM -0500, Eric Blake wrote:
> We are gradually moving away from sector-based interfaces, towards
> byte-based. Make the change for the internal helper function
> get_cluster_offset(), by changing n_start and n_end to by byte
s/by\ byte/be\ byte/
> offsets rather than sector indices within the cluster being
> allocated. However, assert that these values are still
> sector-aligned (at least qcrypto_block_encrypt() still wants that).
> For now we get that alignment for free because we still use
> sector-based driver callbacks.
>
> A later patch will then switch the qcow driver as a whole over
> to byte-based operation; but will still leave things at sector
> alignments as it is not worth auditing the qcow image format
> to worry about sub-sector requests.
>
> Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
>
> ---
> v2: assert sector alignment [Max]
> ---
> block/qcow.c | 29 +++++++++++++++--------------
> 1 file changed, 15 insertions(+), 14 deletions(-)
>
> diff --git a/block/qcow.c b/block/qcow.c
> index 3ba2ca25ea5..42d1bbb7643 100644
> --- a/block/qcow.c
> +++ b/block/qcow.c
> @@ -345,8 +345,8 @@ static int qcow_reopen_prepare(BDRVReopenState *state,
> *
> * 0 to not allocate.
> *
> - * 1 to allocate a normal cluster (for sector indexes 'n_start' to
> - * 'n_end')
> + * 1 to allocate a normal cluster (for sector-aligned byte offsets 'n_start'
> + * to 'n_end' within the cluster)
> *
> * 2 to allocate a compressed cluster of size
> * 'compressed_size'. 'compressed_size' must be > 0 and <
> @@ -440,9 +440,10 @@ static int get_cluster_offset(BlockDriverState *bs,
> if (!allocate)
> return 0;
> BLKDBG_EVENT(bs->file, BLKDBG_CLUSTER_ALLOC);
> + assert(QEMU_IS_ALIGNED(n_start | n_end, BDRV_SECTOR_SIZE));
> /* allocate a new cluster */
> if ((cluster_offset & QCOW_OFLAG_COMPRESSED) &&
> - (n_end - n_start) < s->cluster_sectors) {
> + (n_end - n_start) < s->cluster_size) {
> /* if the cluster is already compressed, we must
> decompress it in the case it is not completely
> overwritten */
> @@ -480,16 +481,15 @@ static int get_cluster_offset(BlockDriverState *bs,
> /* if encrypted, we must initialize the cluster
> content which won't be written */
> if (bs->encrypted &&
> - (n_end - n_start) < s->cluster_sectors) {
> - uint64_t start_sect;
> + (n_end - n_start) < s->cluster_size) {
> + uint64_t start_offset;
> assert(s->crypto);
> - start_sect = (offset & ~(s->cluster_size - 1)) >> 9;
> - for(i = 0; i < s->cluster_sectors; i++) {
> + start_offset = offset & ~(s->cluster_size - 1);
> + for (i = 0; i < s->cluster_size; i += BDRV_SECTOR_SIZE) {
> if (i < n_start || i >= n_end) {
> - memset(s->cluster_data, 0x00, 512);
> + memset(s->cluster_data, 0x00, BDRV_SECTOR_SIZE);
> if (qcrypto_block_encrypt(s->crypto,
> - (start_sect + i) *
> - BDRV_SECTOR_SIZE,
> + start_offset + i,
> s->cluster_data,
> BDRV_SECTOR_SIZE,
> NULL) < 0) {
> @@ -497,8 +497,9 @@ static int get_cluster_offset(BlockDriverState *bs,
> }
> BLKDBG_EVENT(bs->file, BLKDBG_WRITE_AIO);
> ret = bdrv_pwrite(bs->file,
> - cluster_offset + i * 512,
> - s->cluster_data, 512);
> + cluster_offset + i,
> + s->cluster_data,
> + BDRV_SECTOR_SIZE);
> if (ret < 0) {
> return ret;
> }
> @@ -758,8 +759,8 @@ static coroutine_fn int qcow_co_writev(BlockDriverState *bs, int64_t sector_num,
> n = nb_sectors;
> }
> ret = get_cluster_offset(bs, sector_num << 9, 1, 0,
> - index_in_cluster,
> - index_in_cluster + n, &cluster_offset);
> + index_in_cluster << 9,
> + (index_in_cluster + n) << 9, &cluster_offset);
> if (ret < 0) {
> break;
> }
> --
> 2.14.3
>
>
next prev parent reply other threads:[~2018-06-04 20:41 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-31 20:50 [Qemu-devel] [PATCH v2 0/8] block: more byte-based cleanups: vectored I/O Eric Blake
2018-05-31 20:50 ` [Qemu-devel] [PATCH v2 1/8] parallels: Switch to byte-based calls Eric Blake
2018-06-01 2:19 ` [Qemu-devel] [Qemu-block] " Jeff Cody
2018-05-31 20:50 ` [Qemu-devel] [PATCH v2 2/8] qcow: Switch get_cluster_offset to be byte-based Eric Blake
2018-06-04 20:41 ` Jeff Cody [this message]
2018-05-31 20:50 ` [Qemu-devel] [PATCH v2 3/8] qcow: Switch qcow_co_readv to byte-based calls Eric Blake
2018-06-04 21:17 ` [Qemu-devel] [Qemu-block] " Jeff Cody
2018-05-31 20:50 ` [Qemu-devel] [PATCH v2 4/8] qcow: Switch qcow_co_writev " Eric Blake
2018-06-04 21:27 ` [Qemu-devel] [Qemu-block] " Jeff Cody
2018-05-31 20:50 ` [Qemu-devel] [PATCH v2 5/8] qcow: Switch to a byte-based driver Eric Blake
2018-06-04 21:33 ` [Qemu-devel] [Qemu-block] " Jeff Cody
2018-06-05 11:12 ` Eric Blake
2018-06-05 13:36 ` Jeff Cody
2018-05-31 20:50 ` [Qemu-devel] [PATCH v2 6/8] replication: Switch to byte-based calls Eric Blake
2018-06-01 3:55 ` [Qemu-devel] [Qemu-block] " Jeff Cody
2018-05-31 20:50 ` [Qemu-devel] [PATCH v2 7/8] vhdx: " Eric Blake
2018-06-01 2:42 ` Jeff Cody
2018-05-31 20:50 ` [Qemu-devel] [PATCH v2 8/8] block: Remove unused sector-based vectored I/O Eric Blake
2018-06-01 3:55 ` [Qemu-devel] [Qemu-block] " Jeff Cody
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180604204109.GC14298@localhost.localdomain \
--to=jcody@redhat.com \
--cc=eblake@redhat.com \
--cc=kwolf@redhat.com \
--cc=mreitz@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).