From: John Snow <jsnow@redhat.com>
To: qemu-devel@nongnu.org
Cc: jsnow@redhat.com, peter.maydell@linaro.org
Subject: [Qemu-devel] [PULL 14/30] ahci: modify ahci_mem_read_32 to work on register numbers
Date: Fri, 8 Jun 2018 13:47:17 -0400 [thread overview]
Message-ID: <20180608174733.4936-15-jsnow@redhat.com> (raw)
In-Reply-To: <20180608174733.4936-1-jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20180531222835.16558-12-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
---
hw/ide/ahci.c | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index 5be43ba2d0..99cbfe6447 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -386,22 +386,27 @@ static uint64_t ahci_mem_read_32(void *opaque, hwaddr addr)
uint32_t val = 0;
if (addr < AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR) {
- switch (addr) {
- case HOST_CAP:
+ enum AHCIHostReg regnum = addr / 4;
+ assert(regnum < AHCI_HOST_REG__COUNT);
+
+ switch (regnum) {
+ case AHCI_HOST_REG_CAP:
val = s->control_regs.cap;
break;
- case HOST_CTL:
+ case AHCI_HOST_REG_CTL:
val = s->control_regs.ghc;
break;
- case HOST_IRQ_STAT:
+ case AHCI_HOST_REG_IRQ_STAT:
val = s->control_regs.irqstatus;
break;
- case HOST_PORTS_IMPL:
+ case AHCI_HOST_REG_PORTS_IMPL:
val = s->control_regs.impl;
break;
- case HOST_VERSION:
+ case AHCI_HOST_REG_VERSION:
val = s->control_regs.version;
break;
+ default:
+ break;
}
} else if ((addr >= AHCI_PORT_REGS_START_ADDR) &&
(addr < (AHCI_PORT_REGS_START_ADDR +
--
2.14.3
next prev parent reply other threads:[~2018-06-08 17:47 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-08 17:47 [Qemu-devel] [PULL 00/30] Ide patches John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 01/30] ahci: trim signatures on raise/lower John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 02/30] ahci: fix PxCI register race John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 03/30] ahci: don't schedule unnecessary BH John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 04/30] ahci: add port register enumeration John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 05/30] ahci: modify ahci_port_read to use register numbers John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 06/30] ahci: make port read traces more descriptive John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 07/30] ahci: fix spacing damage on ahci_port_write John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 08/30] ahci: combine identical clauses in port write John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 09/30] ahci: modify ahci_port_write to use register numbers John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 10/30] ahci: make port write traces more descriptive John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 11/30] ahci: delete old port register address definitions John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 12/30] ahci: add host register enumeration John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 13/30] ahci: fix host register max address John Snow
2018-06-08 17:47 ` John Snow [this message]
2018-06-08 17:47 ` [Qemu-devel] [PULL 15/30] ahci: make mem_read_32 traces more descriptive John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 16/30] ahci: fix spacing damage on ahci_mem_write John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 17/30] ahci: adjust ahci_mem_write to work on registers John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 18/30] ahci: delete old host register address definitions John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 19/30] ahci: make ahci_mem_write traces more descriptive John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 20/30] tests/boot-sector: Add magic bytes to s390x boot code header John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 21/30] tests/cdrom-test: Test booting from CD-ROM ISO image file John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 22/30] tests/cdrom-test: Test that -cdrom parameter is working John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 23/30] MAINTAINERS: Add the cdrom-test to John's section John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 24/30] libqos/ahci: track sector size John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 25/30] ahci: move PIO Setup FIS before transfer, fix it for ATAPI commands John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 26/30] ide: push end_transfer_func out of start_transfer callback, rename callback John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 27/30] ide: call ide_cmd_done from ide_transfer_stop John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 28/30] ide: make ide_transfer_stop idempotent John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 29/30] atapi: call ide_set_irq before ide_transfer_start John Snow
2018-06-08 17:47 ` [Qemu-devel] [PULL 30/30] ide: introduce ide_transfer_start_norecurse John Snow
2018-06-11 11:46 ` [Qemu-devel] [PULL 00/30] Ide patches Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180608174733.4936-15-jsnow@redhat.com \
--to=jsnow@redhat.com \
--cc=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).