From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
To: Juan Quintela <quintela@redhat.com>
Cc: qemu-devel@nongnu.org, lvivier@redhat.com, peterx@redhat.com
Subject: Re: [Qemu-devel] [PATCH v13 10/12] migration: Wait for blocking IO
Date: Mon, 11 Jun 2018 16:54:51 +0100 [thread overview]
Message-ID: <20180611155450.GH2661@work-vm> (raw)
In-Reply-To: <20180523111817.1463-11-quintela@redhat.com>
* Juan Quintela (quintela@redhat.com) wrote:
> We have three conditions here:
> - channel fails -> error
> - we have to quit: we close the channel and reads fails
> - normal read that success, we are in bussiness
>
> So forget the complications of waiting in a semaphore.
>
> Signed-off-by: Juan Quintela <quintela@redhat.com>
I'd still prefer this to be squashed into the earlier ones somehow, but
the result looks OK afterwards I think.
Dave
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
> ---
> migration/ram.c | 81 ++++++++++++++++++-------------------------------
> 1 file changed, 29 insertions(+), 52 deletions(-)
>
> diff --git a/migration/ram.c b/migration/ram.c
> index 2584130c85..a707d3ae80 100644
> --- a/migration/ram.c
> +++ b/migration/ram.c
> @@ -595,8 +595,6 @@ typedef struct {
> bool running;
> /* should this thread finish */
> bool quit;
> - /* thread has work to do */
> - bool pending_job;
> /* array of pages to receive */
> MultiFDPages_t *pages;
> /* packet allocated len */
> @@ -1170,14 +1168,6 @@ static void multifd_recv_sync_main(void)
> for (i = 0; i < migrate_multifd_channels(); i++) {
> MultiFDRecvParams *p = &multifd_recv_state->params[i];
>
> - trace_multifd_recv_sync_main_signal(p->id);
> - qemu_mutex_lock(&p->mutex);
> - p->pending_job = true;
> - qemu_mutex_unlock(&p->mutex);
> - }
> - for (i = 0; i < migrate_multifd_channels(); i++) {
> - MultiFDRecvParams *p = &multifd_recv_state->params[i];
> -
> trace_multifd_recv_sync_main_wait(p->id);
> qemu_sem_wait(&multifd_recv_state->sem_sync);
> qemu_mutex_lock(&p->mutex);
> @@ -1190,7 +1180,6 @@ static void multifd_recv_sync_main(void)
> MultiFDRecvParams *p = &multifd_recv_state->params[i];
>
> trace_multifd_recv_sync_main_signal(p->id);
> -
> qemu_sem_post(&p->sem_sync);
> }
> trace_multifd_recv_sync_main(multifd_recv_state->seq);
> @@ -1205,51 +1194,40 @@ static void *multifd_recv_thread(void *opaque)
> trace_multifd_recv_thread_start(p->id);
>
> while (true) {
> + uint32_t used;
> + uint32_t flags;
> +
> + ret = qio_channel_read_all_eof(p->c, (void *)p->packet,
> + p->packet_len, &local_err);
> + if (ret == 0) { /* EOF */
> + break;
> + }
> + if (ret == -1) { /* Error */
> + break;
> + }
> +
> qemu_mutex_lock(&p->mutex);
> - if (true || p->pending_job) {
> - uint32_t used;
> - uint32_t flags;
> - qemu_mutex_unlock(&p->mutex);
> -
> - ret = qio_channel_read_all_eof(p->c, (void *)p->packet,
> - p->packet_len, &local_err);
> - if (ret == 0) { /* EOF */
> - break;
> - }
> - if (ret == -1) { /* Error */
> - break;
> - }
> -
> - qemu_mutex_lock(&p->mutex);
> - ret = multifd_recv_unfill_packet(p, &local_err);
> - if (ret) {
> - qemu_mutex_unlock(&p->mutex);
> - break;
> - }
> -
> - used = p->pages->used;
> - flags = p->flags;
> - trace_multifd_recv(p->id, p->seq, used, flags);
> - p->pending_job = false;
> - p->num_packets++;
> - p->num_pages += used;
> + ret = multifd_recv_unfill_packet(p, &local_err);
> + if (ret) {
> qemu_mutex_unlock(&p->mutex);
> + break;
> + }
>
> - ret = qio_channel_readv_all(p->c, p->pages->iov, used, &local_err);
> - if (ret != 0) {
> - break;
> - }
> + used = p->pages->used;
> + flags = p->flags;
> + trace_multifd_recv(p->id, p->seq, used, flags);
> + p->num_packets++;
> + p->num_pages += used;
> + qemu_mutex_unlock(&p->mutex);
>
> - if (flags & MULTIFD_FLAG_SYNC) {
> - qemu_sem_post(&multifd_recv_state->sem_sync);
> - qemu_sem_wait(&p->sem_sync);
> - }
> - } else if (p->quit) {
> - qemu_mutex_unlock(&p->mutex);
> + ret = qio_channel_readv_all(p->c, p->pages->iov, used, &local_err);
> + if (ret != 0) {
> break;
> - } else {
> - qemu_mutex_unlock(&p->mutex);
> - /* sometimes there are spurious wakeups */
> + }
> +
> + if (flags & MULTIFD_FLAG_SYNC) {
> + qemu_sem_post(&multifd_recv_state->sem_sync);
> + qemu_sem_wait(&p->sem_sync);
> }
> }
>
> @@ -1287,7 +1265,6 @@ int multifd_load_setup(void)
> qemu_sem_init(&p->sem, 0);
> qemu_sem_init(&p->sem_sync, 0);
> p->quit = false;
> - p->pending_job = false;
> p->id = i;
> p->pages = multifd_pages_init(page_count);
> p->packet_len = sizeof(MultiFDPacket_t)
> --
> 2.17.0
>
--
Dr. David Alan Gilbert / dgilbert@redhat.com / Manchester, UK
next prev parent reply other threads:[~2018-06-11 15:55 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-05-23 11:18 [Qemu-devel] [PATCH v13 00/12] Multifd Juan Quintela
2018-05-23 11:18 ` [Qemu-devel] [PATCH v13 01/12] migration: Create multipage support Juan Quintela
2018-06-11 16:58 ` Dr. David Alan Gilbert
2018-05-23 11:18 ` [Qemu-devel] [PATCH v13 02/12] migration: Create multifd packet Juan Quintela
2018-06-11 11:10 ` Dr. David Alan Gilbert
2018-05-23 11:18 ` [Qemu-devel] [PATCH v13 03/12] migration: Add multifd traces for start/end thread Juan Quintela
2018-05-31 16:11 ` Dr. David Alan Gilbert
2018-05-23 11:18 ` [Qemu-devel] [PATCH v13 04/12] migration: Calculate transferred ram correctly Juan Quintela
2018-05-31 17:14 ` Dr. David Alan Gilbert
2018-05-23 11:18 ` [Qemu-devel] [PATCH v13 05/12] migration: Multifd channels always wait on the sem Juan Quintela
2018-06-11 17:13 ` Dr. David Alan Gilbert
2018-05-23 11:18 ` [Qemu-devel] [PATCH v13 06/12] migration: Add block where to send/receive packets Juan Quintela
2018-05-23 11:18 ` [Qemu-devel] [PATCH v13 07/12] migration: Synchronize multifd threads with main thread Juan Quintela
2018-06-11 11:53 ` Dr. David Alan Gilbert
2018-05-23 11:18 ` [Qemu-devel] [PATCH v13 08/12] migration: Create ram_save_multifd_page Juan Quintela
2018-06-11 17:33 ` Dr. David Alan Gilbert
2018-05-23 11:18 ` [Qemu-devel] [PATCH v13 09/12] migration: Start sending messages Juan Quintela
2018-06-11 15:49 ` Dr. David Alan Gilbert
2018-05-23 11:18 ` [Qemu-devel] [PATCH v13 10/12] migration: Wait for blocking IO Juan Quintela
2018-06-11 15:54 ` Dr. David Alan Gilbert [this message]
2018-05-23 11:18 ` [Qemu-devel] [PATCH v13 11/12] migration: Remove not needed semaphore and quit Juan Quintela
2018-06-11 16:45 ` Dr. David Alan Gilbert
2018-06-20 7:20 ` Juan Quintela
2018-06-20 9:01 ` Dr. David Alan Gilbert
2018-06-20 9:42 ` Juan Quintela
2018-06-20 9:46 ` Dr. David Alan Gilbert
2018-06-20 9:48 ` Juan Quintela
2018-06-20 10:38 ` Dr. David Alan Gilbert
2018-06-20 11:07 ` Juan Quintela
2018-06-20 11:25 ` Dr. David Alan Gilbert
2018-05-23 11:18 ` [Qemu-devel] [PATCH v13 12/12] migration: Stop sending whole pages through main channel Juan Quintela
2018-05-23 11:41 ` [Qemu-devel] [PATCH v13 00/12] Multifd no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180611155450.GH2661@work-vm \
--to=dgilbert@redhat.com \
--cc=lvivier@redhat.com \
--cc=peterx@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).