From: Max Reitz <mreitz@redhat.com>
To: qemu-block@nongnu.org
Cc: qemu-devel@nongnu.org, Max Reitz <mreitz@redhat.com>,
Kevin Wolf <kwolf@redhat.com>, John Snow <jsnow@redhat.com>,
Stefan Hajnoczi <stefanha@redhat.com>,
Jeff Cody <jcody@redhat.com>
Subject: [Qemu-devel] [PATCH v5 03/14] block/mirror: Use CoQueue to wait on in-flight ops
Date: Wed, 13 Jun 2018 20:18:12 +0200 [thread overview]
Message-ID: <20180613181823.13618-4-mreitz@redhat.com> (raw)
In-Reply-To: <20180613181823.13618-1-mreitz@redhat.com>
Attach a CoQueue to each in-flight operation so if we need to wait for
any we can use it to wait instead of just blindly yielding and hoping
for some operation to wake us.
A later patch will use this infrastructure to allow requests accessing
the same area of the virtual disk to specifically wait for each other.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
---
block/mirror.c | 34 +++++++++++++++++++++++-----------
1 file changed, 23 insertions(+), 11 deletions(-)
diff --git a/block/mirror.c b/block/mirror.c
index 47122482ff..7fb1074c72 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -13,6 +13,7 @@
#include "qemu/osdep.h"
#include "qemu/cutils.h"
+#include "qemu/coroutine.h"
#include "trace.h"
#include "block/blockjob_int.h"
#include "block/block_int.h"
@@ -33,6 +34,8 @@ typedef struct MirrorBuffer {
QSIMPLEQ_ENTRY(MirrorBuffer) next;
} MirrorBuffer;
+typedef struct MirrorOp MirrorOp;
+
typedef struct MirrorBlockJob {
BlockJob common;
BlockBackend *target;
@@ -65,15 +68,15 @@ typedef struct MirrorBlockJob {
unsigned long *in_flight_bitmap;
int in_flight;
int64_t bytes_in_flight;
+ QTAILQ_HEAD(MirrorOpList, MirrorOp) ops_in_flight;
int ret;
bool unmap;
- bool waiting_for_io;
int target_cluster_size;
int max_iov;
bool initial_zeroing_ongoing;
} MirrorBlockJob;
-typedef struct MirrorOp {
+struct MirrorOp {
MirrorBlockJob *s;
QEMUIOVector qiov;
int64_t offset;
@@ -82,7 +85,11 @@ typedef struct MirrorOp {
/* The pointee is set by mirror_co_read(), mirror_co_zero(), and
* mirror_co_discard() before yielding for the first time */
int64_t *bytes_handled;
-} MirrorOp;
+
+ CoQueue waiting_requests;
+
+ QTAILQ_ENTRY(MirrorOp) next;
+};
typedef enum MirrorMethod {
MIRROR_METHOD_COPY,
@@ -123,7 +130,9 @@ static void coroutine_fn mirror_iteration_done(MirrorOp *op, int ret)
chunk_num = op->offset / s->granularity;
nb_chunks = DIV_ROUND_UP(op->bytes, s->granularity);
+
bitmap_clear(s->in_flight_bitmap, chunk_num, nb_chunks);
+ QTAILQ_REMOVE(&s->ops_in_flight, op, next);
if (ret >= 0) {
if (s->cow_bitmap) {
bitmap_set(s->cow_bitmap, chunk_num, nb_chunks);
@@ -133,11 +142,9 @@ static void coroutine_fn mirror_iteration_done(MirrorOp *op, int ret)
}
}
qemu_iovec_destroy(&op->qiov);
- g_free(op);
- if (s->waiting_for_io) {
- qemu_coroutine_enter(s->common.job.co);
- }
+ qemu_co_queue_restart_all(&op->waiting_requests);
+ g_free(op);
}
static void coroutine_fn mirror_write_complete(MirrorOp *op, int ret)
@@ -227,10 +234,11 @@ static int mirror_cow_align(MirrorBlockJob *s, int64_t *offset,
static inline void mirror_wait_for_io(MirrorBlockJob *s)
{
- assert(!s->waiting_for_io);
- s->waiting_for_io = true;
- qemu_coroutine_yield();
- s->waiting_for_io = false;
+ MirrorOp *op;
+
+ op = QTAILQ_FIRST(&s->ops_in_flight);
+ assert(op);
+ qemu_co_queue_wait(&op->waiting_requests, NULL);
}
/* Perform a mirror copy operation.
@@ -340,6 +348,7 @@ static unsigned mirror_perform(MirrorBlockJob *s, int64_t offset,
.bytes = bytes,
.bytes_handled = &bytes_handled,
};
+ qemu_co_queue_init(&op->waiting_requests);
switch (mirror_method) {
case MIRROR_METHOD_COPY:
@@ -355,6 +364,7 @@ static unsigned mirror_perform(MirrorBlockJob *s, int64_t offset,
abort();
}
+ QTAILQ_INSERT_TAIL(&s->ops_in_flight, op, next);
qemu_coroutine_enter(co);
/* At this point, ownership of op has been moved to the coroutine
* and the object may already be freed */
@@ -1282,6 +1292,8 @@ static void mirror_start_job(const char *job_id, BlockDriverState *bs,
}
}
+ QTAILQ_INIT(&s->ops_in_flight);
+
trace_mirror_start(bs, s, opaque);
job_start(&s->common.job);
return;
--
2.17.1
next prev parent reply other threads:[~2018-06-13 18:18 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-13 18:18 [Qemu-devel] [PATCH v5 00/14] block/mirror: Add active-sync mirroring Max Reitz
2018-06-13 18:18 ` [Qemu-devel] [PATCH v5 01/14] block/mirror: Pull out mirror_perform() Max Reitz
2018-06-13 18:18 ` [Qemu-devel] [PATCH v5 02/14] block/mirror: Convert to coroutines Max Reitz
2018-06-14 15:22 ` Kevin Wolf
2018-06-18 14:03 ` Max Reitz
2018-06-13 18:18 ` Max Reitz [this message]
2018-06-13 18:18 ` [Qemu-devel] [PATCH v5 04/14] block/mirror: Wait for in-flight op conflicts Max Reitz
2018-06-13 18:18 ` [Qemu-devel] [PATCH v5 05/14] block/mirror: Use source as a BdrvChild Max Reitz
2018-06-13 18:18 ` [Qemu-devel] [PATCH v5 06/14] block: Generalize should_update_child() rule Max Reitz
2018-06-13 18:18 ` [Qemu-devel] [PATCH v5 07/14] hbitmap: Add @advance param to hbitmap_iter_next() Max Reitz
2018-06-13 18:18 ` [Qemu-devel] [PATCH v5 08/14] test-hbitmap: Add non-advancing iter_next tests Max Reitz
2018-06-13 18:18 ` [Qemu-devel] [PATCH v5 09/14] block/dirty-bitmap: Add bdrv_dirty_iter_next_area Max Reitz
2018-06-13 18:18 ` [Qemu-devel] [PATCH v5 10/14] block/mirror: Add MirrorBDSOpaque Max Reitz
2018-06-13 18:18 ` [Qemu-devel] [PATCH v5 11/14] job: Add job_progress_increase_remaining() Max Reitz
2018-06-14 15:50 ` Kevin Wolf
2018-06-13 18:18 ` [Qemu-devel] [PATCH v5 12/14] block/mirror: Add active mirroring Max Reitz
2018-06-13 18:18 ` [Qemu-devel] [PATCH v5 13/14] block/mirror: Add copy mode QAPI interface Max Reitz
2018-06-13 18:18 ` [Qemu-devel] [PATCH v5 14/14] iotests: Add test for active mirroring Max Reitz
2018-06-18 15:11 ` [Qemu-devel] [PATCH v5 00/14] block/mirror: Add active-sync mirroring Max Reitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180613181823.13618-4-mreitz@redhat.com \
--to=mreitz@redhat.com \
--cc=jcody@redhat.com \
--cc=jsnow@redhat.com \
--cc=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
--cc=stefanha@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).