qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: luc.michel@greensocs.com
To: qemu-devel@nongnu.org
Cc: Luc MICHEL <luc.michel@greensocs.com>,
	qemu-arm@nongnu.org, Peter Maydell <peter.maydell@linaro.org>,
	saipava@xilinx.com, edgari@xilinx.com, mark.burton@greensocs.com,
	Jan Kiszka <jan.kiszka@web.de>
Subject: [Qemu-devel] [PATCH v2 7/7] xlnx-zynqmp: Improve GIC wiring and MMIO mapping
Date: Tue, 19 Jun 2018 11:31:24 +0200	[thread overview]
Message-ID: <20180619093124.24011-8-luc.michel@greensocs.com> (raw)
In-Reply-To: <20180619093124.24011-1-luc.michel@greensocs.com>

From: Luc MICHEL <luc.michel@greensocs.com>

This commit improve the way the GIC is realized and connected in the
ZynqMP SoC. The security extensions are enabled only if requested in the
machine state. The same goes for the virtualization extensions.

All the GIC to APU CPU(s) IRQ lines are now connected, including FIQ,
vIRQ and vFIQ. The missing CPU to GIC timers IRQ connections are also
added (HYP and SEC timers).

The GIC maintenance IRQs are back-wired to the correct GIC PPIs.

Finally, the MMIO mappings are reworked to take into account the ZynqMP
specificities. the GIC (v)CPU interface is aliased 16 times:
  * for the firsts 0x1000 bytes from 0xf9010000 to 0xf901f000
  * for the seconds 0x1000 bytes from 0xf9020000 to 0xf902f000
Mappings of the virtual interface and virtual CPU interface are mapped
only when virtualization extensions are requested. The
XlnxZynqMPGICRegion struct has been enhanced to be able to catch all
this information.

Signed-off-by: Luc MICHEL <luc.michel@greensocs.com>
---
 hw/arm/xlnx-zynqmp.c         | 92 ++++++++++++++++++++++++++++++++----
 include/hw/arm/xlnx-zynqmp.h |  4 +-
 2 files changed, 86 insertions(+), 10 deletions(-)

diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
index 2045b9d71e..4d17c70ec6 100644
--- a/hw/arm/xlnx-zynqmp.c
+++ b/hw/arm/xlnx-zynqmp.c
@@ -29,12 +29,17 @@
 
 #define ARM_PHYS_TIMER_PPI  30
 #define ARM_VIRT_TIMER_PPI  27
+#define ARM_HYP_TIMER_PPI   26
+#define ARM_SEC_TIMER_PPI   29
+#define GIC_MAINTENANCE_PPI 25
 
 #define GEM_REVISION        0x40070106
 
 #define GIC_BASE_ADDR       0xf9000000
 #define GIC_DIST_ADDR       0xf9010000
 #define GIC_CPU_ADDR        0xf9020000
+#define GIC_VIFACE_ADDR     0xf9040000
+#define GIC_VCPU_ADDR       0xf9060000
 
 #define SATA_INTR           133
 #define SATA_ADDR           0xFD0C0000
@@ -111,11 +116,54 @@ static const int adma_ch_intr[XLNX_ZYNQMP_NUM_ADMA_CH] = {
 typedef struct XlnxZynqMPGICRegion {
     int region_index;
     uint32_t address;
+    uint32_t offset;
+    bool virt;
 } XlnxZynqMPGICRegion;
 
 static const XlnxZynqMPGICRegion xlnx_zynqmp_gic_regions[] = {
-    { .region_index = 0, .address = GIC_DIST_ADDR, },
-    { .region_index = 1, .address = GIC_CPU_ADDR,  },
+    /* Distributor */
+    {
+        .region_index = 0,
+        .address = GIC_DIST_ADDR,
+        .offset = 0,
+        .virt = false
+    },
+
+    /* CPU interface */
+    {
+        .region_index = 1,
+        .address = GIC_CPU_ADDR,
+        .offset = 0,
+        .virt = false
+    },
+    {
+        .region_index = 1,
+        .address = GIC_CPU_ADDR + 0x10000,
+        .offset = 0x1000,
+        .virt = false
+    },
+
+    /* Virtual interface */
+    {
+        .region_index = 2,
+        .address = GIC_VIFACE_ADDR,
+        .offset = 0,
+        .virt = true
+    },
+
+    /* Virtual CPU interface */
+    {
+        .region_index = 3,
+        .address = GIC_VCPU_ADDR,
+        .offset = 0,
+        .virt = true
+    },
+    {
+        .region_index = 3,
+        .address = GIC_VCPU_ADDR + 0x10000,
+        .offset = 0x1000,
+        .virt = true
+    },
 };
 
 static inline int arm_gic_ppi_index(int cpu_nr, int ppi_index)
@@ -286,6 +334,9 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
     qdev_prop_set_uint32(DEVICE(&s->gic), "num-irq", GIC_NUM_SPI_INTR + 32);
     qdev_prop_set_uint32(DEVICE(&s->gic), "revision", 2);
     qdev_prop_set_uint32(DEVICE(&s->gic), "num-cpu", num_apus);
+    qdev_prop_set_bit(DEVICE(&s->gic), "has-security-extensions", s->secure);
+    qdev_prop_set_bit(DEVICE(&s->gic),
+                      "has-virtualization-extensions", s->virt);
 
     /* Realize APUs before realizing the GIC. KVM requires this.  */
     for (i = 0; i < num_apus; i++) {
@@ -330,19 +381,23 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
     for (i = 0; i < XLNX_ZYNQMP_GIC_REGIONS; i++) {
         SysBusDevice *gic = SYS_BUS_DEVICE(&s->gic);
         const XlnxZynqMPGICRegion *r = &xlnx_zynqmp_gic_regions[i];
-        MemoryRegion *mr = sysbus_mmio_get_region(gic, r->region_index);
+        MemoryRegion *mr;
         uint32_t addr = r->address;
         int j;
 
-        sysbus_mmio_map(gic, r->region_index, addr);
+        if (r->virt && !s->virt) {
+            continue;
+        }
 
+        mr = sysbus_mmio_get_region(gic, r->region_index);
         for (j = 0; j < XLNX_ZYNQMP_GIC_ALIASES; j++) {
             MemoryRegion *alias = &s->gic_mr[i][j];
 
-            addr += XLNX_ZYNQMP_GIC_REGION_SIZE;
             memory_region_init_alias(alias, OBJECT(s), "zynqmp-gic-alias", mr,
-                                     0, XLNX_ZYNQMP_GIC_REGION_SIZE);
+                                     r->offset, XLNX_ZYNQMP_GIC_REGION_SIZE);
             memory_region_add_subregion(system_memory, addr, alias);
+
+            addr += XLNX_ZYNQMP_GIC_REGION_SIZE;
         }
     }
 
@@ -352,12 +407,33 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
         sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i,
                            qdev_get_gpio_in(DEVICE(&s->apu_cpu[i]),
                                             ARM_CPU_IRQ));
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + num_apus,
+                           qdev_get_gpio_in(DEVICE(&s->apu_cpu[i]),
+                                            ARM_CPU_FIQ));
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + num_apus * 2,
+                           qdev_get_gpio_in(DEVICE(&s->apu_cpu[i]),
+                                            ARM_CPU_VIRQ));
+        sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + num_apus * 3,
+                           qdev_get_gpio_in(DEVICE(&s->apu_cpu[i]),
+                                            ARM_CPU_VFIQ));
         irq = qdev_get_gpio_in(DEVICE(&s->gic),
                                arm_gic_ppi_index(i, ARM_PHYS_TIMER_PPI));
-        qdev_connect_gpio_out(DEVICE(&s->apu_cpu[i]), 0, irq);
+        qdev_connect_gpio_out(DEVICE(&s->apu_cpu[i]), GTIMER_PHYS, irq);
         irq = qdev_get_gpio_in(DEVICE(&s->gic),
                                arm_gic_ppi_index(i, ARM_VIRT_TIMER_PPI));
-        qdev_connect_gpio_out(DEVICE(&s->apu_cpu[i]), 1, irq);
+        qdev_connect_gpio_out(DEVICE(&s->apu_cpu[i]), GTIMER_VIRT, irq);
+        irq = qdev_get_gpio_in(DEVICE(&s->gic),
+                               arm_gic_ppi_index(i, ARM_HYP_TIMER_PPI));
+        qdev_connect_gpio_out(DEVICE(&s->apu_cpu[i]), GTIMER_HYP, irq);
+        irq = qdev_get_gpio_in(DEVICE(&s->gic),
+                               arm_gic_ppi_index(i, ARM_SEC_TIMER_PPI));
+        qdev_connect_gpio_out(DEVICE(&s->apu_cpu[i]), GTIMER_SEC, irq);
+
+        if (s->virt) {
+            irq = qdev_get_gpio_in(DEVICE(&s->gic),
+                                   arm_gic_ppi_index(i, GIC_MAINTENANCE_PPI));
+            sysbus_connect_irq(SYS_BUS_DEVICE(&s->gic), i + num_apus * 4, irq);
+        }
     }
 
     if (s->has_rpu) {
diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h
index 82b6ec2486..98f925ab84 100644
--- a/include/hw/arm/xlnx-zynqmp.h
+++ b/include/hw/arm/xlnx-zynqmp.h
@@ -53,7 +53,7 @@
 #define XLNX_ZYNQMP_OCM_RAM_0_ADDRESS 0xFFFC0000
 #define XLNX_ZYNQMP_OCM_RAM_SIZE 0x10000
 
-#define XLNX_ZYNQMP_GIC_REGIONS 2
+#define XLNX_ZYNQMP_GIC_REGIONS 6
 
 /* ZynqMP maps the ARM GIC regions (GICC, GICD ...) at consecutive 64k offsets
  * and under-decodes the 64k region. This mirrors the 4k regions to every 4k
@@ -62,7 +62,7 @@
  */
 
 #define XLNX_ZYNQMP_GIC_REGION_SIZE 0x1000
-#define XLNX_ZYNQMP_GIC_ALIASES     (0x10000 / XLNX_ZYNQMP_GIC_REGION_SIZE - 1)
+#define XLNX_ZYNQMP_GIC_ALIASES     (0x10000 / XLNX_ZYNQMP_GIC_REGION_SIZE)
 
 #define XLNX_ZYNQMP_MAX_LOW_RAM_SIZE    0x80000000ull
 
-- 
2.17.1

  parent reply	other threads:[~2018-06-19  9:31 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-19  9:31 [Qemu-devel] [PATCH v2 0/7] arm_gic: add virtualization extensions support luc.michel
2018-06-19  9:31 ` [Qemu-devel] [PATCH v2 1/7] intc/arm_gic: Refactor operations on the distributor luc.michel
2018-06-19  9:31 ` [Qemu-devel] [PATCH v2 2/7] intc/arm_gic: Remove some dead code and put some functions static luc.michel
2018-06-19  9:31 ` [Qemu-devel] [PATCH v2 3/7] vmstate.h: Provide VMSTATE_UINT16_SUB_ARRAY luc.michel
2018-06-25 11:47   ` Peter Maydell
2018-06-19  9:31 ` [Qemu-devel] [PATCH v2 4/7] intc/arm_gic: Add the virtualization extensions to the GIC state luc.michel
2018-06-25 14:23   ` Peter Maydell
2018-06-19  9:31 ` [Qemu-devel] [PATCH v2 5/7] intc/arm_gic: Add virtualization extensions logic luc.michel
2018-06-25 14:23   ` Peter Maydell
2018-06-26  9:17     ` Luc Michel
2018-06-19  9:31 ` [Qemu-devel] [PATCH v2 6/7] intc/arm_gic: Improve traces luc.michel
2018-06-25 11:50   ` Peter Maydell
2018-06-19  9:31 ` luc.michel [this message]
2018-06-25 14:29   ` [Qemu-devel] [PATCH v2 7/7] xlnx-zynqmp: Improve GIC wiring and MMIO mapping Peter Maydell
2018-06-25  4:55 ` [Qemu-devel] [PATCH v2 0/7] arm_gic: add virtualization extensions support Jan Kiszka
2018-06-25 11:12   ` Peter Maydell
2018-06-26  9:20     ` Luc Michel
2018-06-26  9:24   ` Luc Michel
2018-06-26 10:22     ` Jan Kiszka
2018-06-26 10:29       ` Jan Kiszka

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180619093124.24011-8-luc.michel@greensocs.com \
    --to=luc.michel@greensocs.com \
    --cc=edgari@xilinx.com \
    --cc=jan.kiszka@web.de \
    --cc=mark.burton@greensocs.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-arm@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=saipava@xilinx.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).