From: David Hildenbrand <david@redhat.com>
To: qemu-s390x@nongnu.org
Cc: qemu-devel@nongnu.org, Richard Henderson <rth@twiddle.net>,
Alexander Graf <agraf@suse.de>, Cornelia Huck <cohuck@redhat.com>,
Christian Borntraeger <borntraeger@de.ibm.com>,
Thomas Huth <thuth@redhat.com>,
David Hildenbrand <david@redhat.com>
Subject: [Qemu-devel] [PATCH v2 5/7] s390x/tcg: implement SET CLOCK
Date: Wed, 20 Jun 2018 12:08:23 +0200 [thread overview]
Message-ID: <20180620100825.22476-6-david@redhat.com> (raw)
In-Reply-To: <20180620100825.22476-1-david@redhat.com>
This allows a guest to change its TOD. We already take care of updating
all CKC timers from within S390TODClass.
Use MO_ALIGN to load the operand manually - this will properly trigger a
SPECIFICATION exception.
Signed-off-by: David Hildenbrand <david@redhat.com>
---
target/s390x/helper.h | 1 +
target/s390x/insn-data.def | 3 +--
target/s390x/misc_helper.c | 19 +++++++++++++++++++
target/s390x/translate.c | 9 +++++++++
4 files changed, 30 insertions(+), 2 deletions(-)
diff --git a/target/s390x/helper.h b/target/s390x/helper.h
index 59cba86a27..97c60ca7bc 100644
--- a/target/s390x/helper.h
+++ b/target/s390x/helper.h
@@ -127,6 +127,7 @@ DEF_HELPER_4(diag, void, env, i32, i32, i32)
DEF_HELPER_3(load_psw, noreturn, env, i64, i64)
DEF_HELPER_FLAGS_2(spx, TCG_CALL_NO_RWG, void, env, i64)
DEF_HELPER_FLAGS_1(stck, TCG_CALL_NO_RWG_SE, i64, env)
+DEF_HELPER_FLAGS_2(sck, TCG_CALL_NO_RWG, i32, env, i64)
DEF_HELPER_FLAGS_2(sckc, TCG_CALL_NO_RWG, void, env, i64)
DEF_HELPER_FLAGS_2(sckpf, TCG_CALL_NO_RWG, void, env, i64)
DEF_HELPER_FLAGS_1(stckc, TCG_CALL_NO_RWG, i64, env)
diff --git a/target/s390x/insn-data.def b/target/s390x/insn-data.def
index 157619403d..5c6f33ed9c 100644
--- a/target/s390x/insn-data.def
+++ b/target/s390x/insn-data.def
@@ -997,8 +997,7 @@
/* SET ADDRESS SPACE CONTROL FAST */
C(0xb279, SACF, S, Z, 0, a2, 0, 0, sacf, 0)
/* SET CLOCK */
- /* ??? Not implemented - is it necessary? */
- C(0xb204, SCK, S, Z, 0, 0, 0, 0, 0, 0)
+ C(0xb204, SCK, S, Z, la2, 0, 0, 0, sck, 0)
/* SET CLOCK COMPARATOR */
C(0xb206, SCKC, S, Z, 0, m2_64a, 0, 0, sckc, 0)
/* SET CLOCK PROGRAMMABLE FIELD */
diff --git a/target/s390x/misc_helper.c b/target/s390x/misc_helper.c
index d5f9f5e1d3..c9712b9476 100644
--- a/target/s390x/misc_helper.c
+++ b/target/s390x/misc_helper.c
@@ -191,6 +191,25 @@ void tcg_s390_tod_updated(CPUState *cs, run_on_cpu_data opaque)
helper_sckc(env, env->ckc);
}
+/* Set Clock */
+uint32_t HELPER(sck)(CPUS390XState *env, uint64_t tod_low)
+{
+ S390TODState *td = s390_get_tod();
+ S390TODClass *tdc = S390_TOD_GET_CLASS(td);
+ S390TOD tod = {
+ .high = 0,
+ .low = tod_low,
+ };
+ Error *err = NULL;
+
+ qemu_mutex_lock_iothread();
+ tdc->set(td, &tod, &err);
+ qemu_mutex_unlock_iothread();
+ g_assert(!err);
+
+ return 0;
+}
+
/* Set Tod Programmable Field */
void HELPER(sckpf)(CPUS390XState *env, uint64_t r0)
{
diff --git a/target/s390x/translate.c b/target/s390x/translate.c
index fdfec7feba..57c03cbf58 100644
--- a/target/s390x/translate.c
+++ b/target/s390x/translate.c
@@ -4016,6 +4016,15 @@ static DisasJumpType op_stcke(DisasContext *s, DisasOps *o)
return DISAS_NEXT;
}
+static DisasJumpType op_sck(DisasContext *s, DisasOps *o)
+{
+ check_privileged(s);
+ tcg_gen_qemu_ld_i64(o->in1, o->addr1, get_mem_index(s), MO_TEQ | MO_ALIGN);
+ gen_helper_sck(cc_op, cpu_env, o->in1);
+ set_cc_static(s);
+ return DISAS_NEXT;
+}
+
static DisasJumpType op_sckc(DisasContext *s, DisasOps *o)
{
check_privileged(s);
--
2.17.1
next prev parent reply other threads:[~2018-06-20 10:08 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-20 10:08 [Qemu-devel] [PATCH v2 0/7] s390x: TOD refactoring + TCG CPU hotplug support David Hildenbrand
2018-06-20 10:08 ` [Qemu-devel] [PATCH v2 1/7] s390x/tod: factor out TOD into separate device David Hildenbrand
2018-06-21 11:15 ` Thomas Huth
2018-06-21 11:51 ` David Hildenbrand
2018-06-20 10:08 ` [Qemu-devel] [PATCH v2 2/7] s390x/tcg: drop tod_basetime David Hildenbrand
2018-06-21 11:33 ` Thomas Huth
2018-06-20 10:08 ` [Qemu-devel] [PATCH v2 3/7] s390x/tcg: properly implement the TOD David Hildenbrand
2018-06-20 19:33 ` Richard Henderson
2018-06-20 20:33 ` David Hildenbrand
2018-06-20 21:00 ` Richard Henderson
2018-06-21 11:44 ` Thomas Huth
2018-06-21 11:52 ` David Hildenbrand
2018-06-20 10:08 ` [Qemu-devel] [PATCH v2 4/7] s390x/tcg: SET CLOCK COMPARATOR can clear CKC interrupts David Hildenbrand
2018-06-21 12:09 ` Thomas Huth
2018-06-21 13:54 ` David Hildenbrand
2018-06-21 14:01 ` [Qemu-devel] [qemu-s390x] " Thomas Huth
2018-06-21 14:10 ` [Qemu-devel] " Cornelia Huck
2018-06-21 13:58 ` Cornelia Huck
2018-06-21 14:03 ` David Hildenbrand
2018-06-20 10:08 ` David Hildenbrand [this message]
2018-06-21 13:14 ` [Qemu-devel] [PATCH v2 5/7] s390x/tcg: implement SET CLOCK Thomas Huth
2018-06-21 14:01 ` David Hildenbrand
2018-06-21 14:23 ` Cornelia Huck
2018-06-20 10:08 ` [Qemu-devel] [PATCH v2 6/7] s390x/tcg: rearm the CKC timer during migration David Hildenbrand
2018-06-21 13:18 ` Thomas Huth
2018-06-20 10:08 ` [Qemu-devel] [PATCH v2 7/7] s390x/tcg: fix CPU hotplug with single-threaded TCG David Hildenbrand
2018-06-21 13:22 ` Thomas Huth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180620100825.22476-6-david@redhat.com \
--to=david@redhat.com \
--cc=agraf@suse.de \
--cc=borntraeger@de.ibm.com \
--cc=cohuck@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=qemu-s390x@nongnu.org \
--cc=rth@twiddle.net \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).