From: Max Reitz <mreitz@redhat.com>
To: qemu-block@nongnu.org
Cc: qemu-devel@nongnu.org, Max Reitz <mreitz@redhat.com>,
Kevin Wolf <kwolf@redhat.com>
Subject: [Qemu-devel] [PATCH v9 13/31] block: Fix bdrv_find_backing_image()
Date: Thu, 28 Jun 2018 02:07:27 +0200 [thread overview]
Message-ID: <20180628000745.4477-14-mreitz@redhat.com> (raw)
In-Reply-To: <20180628000745.4477-1-mreitz@redhat.com>
bdrv_find_backing_image() should use bdrv_get_full_backing_filename() or
bdrv_make_absolute_filename() instead of trying to do what those
functions do by itself.
path_combine_deprecated() can now be dropped, so let's do that.
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
block.c | 33 ++++++++++-----------------------
1 file changed, 10 insertions(+), 23 deletions(-)
diff --git a/block.c b/block.c
index 36edefb458..5d736e0fc1 100644
--- a/block.c
+++ b/block.c
@@ -201,15 +201,6 @@ char *path_combine(const char *base_path, const char *filename)
return result;
}
-static void path_combine_deprecated(char *dest, int dest_size,
- const char *base_path,
- const char *filename)
-{
- char *combined = path_combine(base_path, filename);
- pstrcpy(dest, dest_size, combined);
- g_free(combined);
-}
-
/*
* Helper function for bdrv_parse_filename() implementations to remove optional
* protocol prefixes (especially "file:") from a filename and for putting the
@@ -4301,13 +4292,9 @@ BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
filename_full = g_malloc(PATH_MAX);
backing_file_full = g_malloc(PATH_MAX);
- filename_tmp = g_malloc(PATH_MAX);
is_protocol = path_has_protocol(backing_file);
- /* This will recursively refresh everything in the backing chain */
- bdrv_refresh_filename(bs);
-
for (curr_bs = bs; curr_bs->backing; curr_bs = curr_bs->backing->bs) {
/* If either of the filename paths is actually a protocol, then
@@ -4333,22 +4320,23 @@ BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
} else {
/* If not an absolute filename path, make it relative to the current
* image's filename path */
- path_combine_deprecated(filename_tmp, PATH_MAX, curr_bs->filename,
- backing_file);
-
- /* We are going to compare absolute pathnames */
- if (!realpath(filename_tmp, filename_full)) {
+ filename_tmp = bdrv_make_absolute_filename(curr_bs, backing_file,
+ NULL);
+ /* We are going to compare canonicalized absolute pathnames */
+ if (!filename_tmp || !realpath(filename_tmp, filename_full)) {
+ g_free(filename_tmp);
continue;
}
+ g_free(filename_tmp);
/* We need to make sure the backing filename we are comparing against
* is relative to the current image filename (or absolute) */
- path_combine_deprecated(filename_tmp, PATH_MAX, curr_bs->filename,
- curr_bs->backing_file);
-
- if (!realpath(filename_tmp, backing_file_full)) {
+ filename_tmp = bdrv_get_full_backing_filename(curr_bs, NULL);
+ if (!filename_tmp || !realpath(filename_tmp, backing_file_full)) {
+ g_free(filename_tmp);
continue;
}
+ g_free(filename_tmp);
if (strcmp(backing_file_full, filename_full) == 0) {
retval = curr_bs->backing->bs;
@@ -4359,7 +4347,6 @@ BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
g_free(filename_full);
g_free(backing_file_full);
- g_free(filename_tmp);
return retval;
}
--
2.17.1
next prev parent reply other threads:[~2018-06-28 0:08 UTC|newest]
Thread overview: 52+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-28 0:07 [Qemu-devel] [PATCH v9 00/31] block: Fix some filename generation issues Max Reitz
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 01/31] block: Use bdrv_refresh_filename() to pull Max Reitz
2018-06-28 21:48 ` Eric Blake
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 02/31] block: Use children list in bdrv_refresh_filename Max Reitz
2018-07-19 12:47 ` [Qemu-devel] [Qemu-block] " Ari Sundholm
2018-07-21 21:14 ` Max Reitz
2018-07-23 12:15 ` Ari Sundholm
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 03/31] block: Skip implicit nodes for filename info Max Reitz
2018-06-28 21:49 ` Eric Blake
2018-08-07 14:31 ` [Qemu-devel] [Qemu-block] " Alberto Garcia
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 04/31] block: Add BDS.auto_backing_file Max Reitz
2018-06-28 21:55 ` Eric Blake
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 05/31] block: Respect backing bs in bdrv_refresh_filename Max Reitz
2018-06-28 21:58 ` Eric Blake
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 06/31] iotests.py: Add filter_imgfmt() Max Reitz
2018-06-28 21:59 ` Eric Blake
2018-08-07 15:15 ` [Qemu-devel] [Qemu-block] " Alberto Garcia
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 07/31] iotests.py: Add node_info() Max Reitz
2018-08-07 14:49 ` [Qemu-devel] [Qemu-block] " Alberto Garcia
2018-08-09 17:53 ` Max Reitz
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 08/31] iotests: Add test for backing file overrides Max Reitz
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 09/31] block: Make path_combine() return the path Max Reitz
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 10/31] block: bdrv_get_full_backing_filename_from_...'s ret. val Max Reitz
2018-08-07 15:03 ` [Qemu-devel] [Qemu-block] " Alberto Garcia
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 11/31] block: bdrv_get_full_backing_filename's " Max Reitz
2018-08-07 15:07 ` [Qemu-devel] [Qemu-block] " Alberto Garcia
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 12/31] block: Add bdrv_make_absolute_filename() Max Reitz
2018-08-07 15:07 ` [Qemu-devel] [Qemu-block] " Alberto Garcia
2018-06-28 0:07 ` Max Reitz [this message]
2018-08-07 15:10 ` [Qemu-devel] [Qemu-block] [PATCH v9 13/31] block: Fix bdrv_find_backing_image() Alberto Garcia
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 14/31] block: Add bdrv_dirname() Max Reitz
2018-08-07 15:11 ` [Qemu-devel] [Qemu-block] " Alberto Garcia
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 15/31] blkverify: Make bdrv_dirname() return NULL Max Reitz
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 16/31] quorum: " Max Reitz
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 17/31] block/nbd: " Max Reitz
2018-06-28 22:05 ` Eric Blake
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 18/31] block/nfs: Implement bdrv_dirname() Max Reitz
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 19/31] block: Use bdrv_dirname() for relative filenames Max Reitz
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 20/31] iotests: Add quorum case to test 110 Max Reitz
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 21/31] block: Add strong_runtime_opts to BlockDriver Max Reitz
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 22/31] block: Add BlockDriver.bdrv_gather_child_options Max Reitz
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 23/31] block: Generically refresh runtime options Max Reitz
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 24/31] block: Purify .bdrv_refresh_filename() Max Reitz
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 25/31] block: Do not copy exact_filename from format file Max Reitz
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 26/31] block/nvme: Fix bdrv_refresh_filename() Max Reitz
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 27/31] block/curl: Harmonize option defaults Max Reitz
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 28/31] block/curl: Implement bdrv_refresh_filename() Max Reitz
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 29/31] block/null: Generate filename even with latency-ns Max Reitz
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 30/31] block: BDS options may lack the "driver" option Max Reitz
2018-06-28 0:07 ` [Qemu-devel] [PATCH v9 31/31] iotests: Test json:{} filenames of internal BDSs Max Reitz
2018-07-13 9:49 ` [Qemu-devel] [PATCH v9 00/31] block: Fix some filename generation issues Max Reitz
2018-07-19 12:53 ` [Qemu-devel] [Qemu-block] " Ari Sundholm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180628000745.4477-14-mreitz@redhat.com \
--to=mreitz@redhat.com \
--cc=kwolf@redhat.com \
--cc=qemu-block@nongnu.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).