qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, peter.maydell@linaro.org, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 25/29] qcow: Switch qcow_co_writev to byte-based calls
Date: Fri, 29 Jun 2018 16:09:55 +0200	[thread overview]
Message-ID: <20180629140959.6690-26-kwolf@redhat.com> (raw)
In-Reply-To: <20180629140959.6690-1-kwolf@redhat.com>

From: Eric Blake <eblake@redhat.com>

We are gradually moving away from sector-based interfaces, towards
byte-based.  Make the change for the internals of the qcow
driver write function, by iterating over offset/bytes instead of
sector_num/nb_sectors, and with a rename of index_in_cluster and
repurposing of n to track bytes instead of sectors.

A later patch will then switch the qcow driver as a whole over
to byte-based operation.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 block/qcow.c | 36 +++++++++++++++++-------------------
 1 file changed, 17 insertions(+), 19 deletions(-)

diff --git a/block/qcow.c b/block/qcow.c
index 436ad518be..8fe82ed58d 100644
--- a/block/qcow.c
+++ b/block/qcow.c
@@ -723,13 +723,15 @@ static coroutine_fn int qcow_co_writev(BlockDriverState *bs, int64_t sector_num,
                                        int flags)
 {
     BDRVQcowState *s = bs->opaque;
-    int index_in_cluster;
+    int offset_in_cluster;
     uint64_t cluster_offset;
     int ret = 0, n;
     struct iovec hd_iov;
     QEMUIOVector hd_qiov;
     uint8_t *buf;
     void *orig_buf;
+    int64_t offset = sector_num * BDRV_SECTOR_SIZE;
+    int64_t bytes = nb_sectors * BDRV_SECTOR_SIZE;
 
     assert(!flags);
     s->cluster_cache_offset = -1; /* disable compressed cache */
@@ -749,16 +751,14 @@ static coroutine_fn int qcow_co_writev(BlockDriverState *bs, int64_t sector_num,
 
     qemu_co_mutex_lock(&s->lock);
 
-    while (nb_sectors != 0) {
-
-        index_in_cluster = sector_num & (s->cluster_sectors - 1);
-        n = s->cluster_sectors - index_in_cluster;
-        if (n > nb_sectors) {
-            n = nb_sectors;
+    while (bytes != 0) {
+        offset_in_cluster = offset & (s->cluster_size - 1);
+        n = s->cluster_size - offset_in_cluster;
+        if (n > bytes) {
+            n = bytes;
         }
-        ret = get_cluster_offset(bs, sector_num << 9, 1, 0,
-                                 index_in_cluster << 9,
-                                 (index_in_cluster + n) << 9, &cluster_offset);
+        ret = get_cluster_offset(bs, offset, 1, 0, offset_in_cluster,
+                                 offset_in_cluster + n, &cluster_offset);
         if (ret < 0) {
             break;
         }
@@ -768,30 +768,28 @@ static coroutine_fn int qcow_co_writev(BlockDriverState *bs, int64_t sector_num,
         }
         if (bs->encrypted) {
             assert(s->crypto);
-            if (qcrypto_block_encrypt(s->crypto, sector_num * BDRV_SECTOR_SIZE,
-                                      buf, n * BDRV_SECTOR_SIZE, NULL) < 0) {
+            if (qcrypto_block_encrypt(s->crypto, offset, buf, n, NULL) < 0) {
                 ret = -EIO;
                 break;
             }
         }
 
         hd_iov.iov_base = (void *)buf;
-        hd_iov.iov_len = n * 512;
+        hd_iov.iov_len = n;
         qemu_iovec_init_external(&hd_qiov, &hd_iov, 1);
         qemu_co_mutex_unlock(&s->lock);
         BLKDBG_EVENT(bs->file, BLKDBG_WRITE_AIO);
-        ret = bdrv_co_writev(bs->file,
-                             (cluster_offset >> 9) + index_in_cluster,
-                             n, &hd_qiov);
+        ret = bdrv_co_pwritev(bs->file, cluster_offset + offset_in_cluster,
+                              n, &hd_qiov, 0);
         qemu_co_mutex_lock(&s->lock);
         if (ret < 0) {
             break;
         }
         ret = 0;
 
-        nb_sectors -= n;
-        sector_num += n;
-        buf += n * 512;
+        bytes -= n;
+        offset += n;
+        buf += n;
     }
     qemu_co_mutex_unlock(&s->lock);
 
-- 
2.13.6

  parent reply	other threads:[~2018-06-29 14:10 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-06-29 14:09 [Qemu-devel] [PULL 00/29] Block layer patches Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 01/29] block-qdict: Pacify Coverity after commit f1b34a248e9 Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 02/29] block/crypto: Pacify Coverity after commit f853465aacb Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 03/29] qapi/job: The next release will be 3.0 Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 04/29] usb-storage: Add rerror/werror properties Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 05/29] hw/block/nvme: add optional parameter num_queues for nvme device Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 06/29] qcow2: Fix qcow2_truncate() error return value Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 07/29] block: Convert .bdrv_truncate callback to coroutine_fn Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 08/29] qcow2: Remove coroutine trampoline for preallocate_co() Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 09/29] block: Move bdrv_truncate() implementation to io.c Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 10/29] block: Use tracked request for truncate Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 11/29] file-posix: Make .bdrv_co_truncate asynchronous Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 12/29] qcow2: Remove dead check on !ret Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 13/29] block: Move request tracking to children in copy offloading Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 14/29] block/crypto: Simplify block_crypto_{open, create}_opts_init() Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 15/29] qemu-iotests: Update 026.out.nocache reference output Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 16/29] qcow2: Free allocated clusters on write error Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 17/29] qemu-iotests: Test qcow2 not leaking " Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 18/29] file-posix: Implement co versions of discard/flush Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 19/29] qcow2: Fix src_offset in copy offloading Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 20/29] iscsi: Don't blindly use designator length in response for memcpy Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 21/29] file-posix: Fix EINTR handling Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 22/29] parallels: Switch to byte-based calls Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 23/29] qcow: Switch get_cluster_offset to be byte-based Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 24/29] qcow: Switch qcow_co_readv to byte-based calls Kevin Wolf
2018-06-29 14:09 ` Kevin Wolf [this message]
2018-06-29 14:09 ` [Qemu-devel] [PULL 26/29] qcow: Switch to a byte-based driver Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 27/29] replication: Switch to byte-based calls Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 28/29] vhdx: " Kevin Wolf
2018-06-29 14:09 ` [Qemu-devel] [PULL 29/29] block: Remove unused sector-based vectored I/O Kevin Wolf
2018-06-30 10:54 ` [Qemu-devel] [PULL 00/29] Block layer patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180629140959.6690-26-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).