From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from eggs.gnu.org ([2001:4830:134:3::10]:48233) by lists.gnu.org with esmtp (Exim 4.71) (envelope-from ) id 1fcWcn-0007i8-KA for qemu-devel@nongnu.org; Mon, 09 Jul 2018 09:54:46 -0400 Received: from Debian-exim by eggs.gnu.org with spam-scanned (Exim 4.71) (envelope-from ) id 1fcWcm-000543-Jy for qemu-devel@nongnu.org; Mon, 09 Jul 2018 09:54:45 -0400 Received: from orth.archaic.org.uk ([2001:8b0:1d0::2]:43344) by eggs.gnu.org with esmtps (TLS1.0:RSA_AES_256_CBC_SHA1:32) (Exim 4.71) (envelope-from ) id 1fcWcm-00053K-Bs for qemu-devel@nongnu.org; Mon, 09 Jul 2018 09:54:44 -0400 Received: from pm215 by orth.archaic.org.uk with local (Exim 4.89) (envelope-from ) id 1fcWcl-0000kZ-9C for qemu-devel@nongnu.org; Mon, 09 Jul 2018 14:54:43 +0100 From: Peter Maydell Date: Mon, 9 Jul 2018 14:54:33 +0100 Message-Id: <20180709135435.836-10-peter.maydell@linaro.org> In-Reply-To: <20180709135435.836-1-peter.maydell@linaro.org> References: <20180709135435.836-1-peter.maydell@linaro.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Subject: [Qemu-devel] [PULL 09/11] hw/sd/omap_mmc: Split 'pseudo-reset' from 'power-on-reset' List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: qemu-devel@nongnu.org From: Philippe Mathieu-Daudé DeviceClass::reset models a "cold power-on" reset which can also be used to powercycle a device; but there is no "hot reset" (a.k.a. soft-reset) method available. The OMAP MMC Power-Up Control bit is not designed to powercycle a card, but to disable it without powering it off (pseudo-reset): Multimedia Card (MMC/SD/SDIO) Interface [SPRU765A] MMC_CON[11] Power-Up Control (POW) This bit must be set to 1 before any valid transaction to either MMC/SD or SPI memory cards. When 1, the card is considered powered-up and the controller core is enabled. When 0, the card is considered powered-down (system dependent), and the controller core logic is in pseudo-reset state. This is, the MMC_STAT flags and the FIFO pointers are reset, any access to MMC_DATA[DATA] has no effect, a write into the MMC.CMD register is ignored, and a setting of MMC_SPI[STR] to 1 is ignored. By splitting the 'pseudo-reset' code out of the 'power-on' reset function, this patch fixes a latent bug in omap_mmc_write(MMC_CON)i recently exposed by ecd219f7abb. Signed-off-by: Philippe Mathieu-Daudé Message-id: 20180706162155.8432-2-f4bug@amsat.org Reviewed-by: Peter Maydell Signed-off-by: Peter Maydell --- hw/sd/omap_mmc.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-) diff --git a/hw/sd/omap_mmc.c b/hw/sd/omap_mmc.c index 671264b6500..d0c98ca0214 100644 --- a/hw/sd/omap_mmc.c +++ b/hw/sd/omap_mmc.c @@ -1,6 +1,8 @@ /* * OMAP on-chip MMC/SD host emulation. * + * Datasheet: TI Multimedia Card (MMC/SD/SDIO) Interface (SPRU765A) + * * Copyright (C) 2006-2007 Andrzej Zaborowski * * This program is free software; you can redistribute it and/or @@ -278,6 +280,12 @@ static void omap_mmc_update(void *opaque) omap_mmc_interrupts_update(s); } +static void omap_mmc_pseudo_reset(struct omap_mmc_s *host) +{ + host->status = 0; + host->fifo_len = 0; +} + void omap_mmc_reset(struct omap_mmc_s *host) { host->last_cmd = 0; @@ -286,11 +294,9 @@ void omap_mmc_reset(struct omap_mmc_s *host) host->dw = 0; host->mode = 0; host->enable = 0; - host->status = 0; host->mask = 0; host->cto = 0; host->dto = 0; - host->fifo_len = 0; host->blen = 0; host->blen_counter = 0; host->nblk = 0; @@ -305,6 +311,8 @@ void omap_mmc_reset(struct omap_mmc_s *host) qemu_set_irq(host->coverswitch, host->cdet_state); host->clkdiv = 0; + omap_mmc_pseudo_reset(host); + /* Since we're still using the legacy SD API the card is not plugged * into any bus, and we must reset it manually. When omap_mmc is * QOMified this must move into the QOM reset function. @@ -459,7 +467,7 @@ static void omap_mmc_write(void *opaque, hwaddr offset, if (s->dw != 0 && s->lines < 4) printf("4-bit SD bus enabled\n"); if (!s->enable) - omap_mmc_reset(s); + omap_mmc_pseudo_reset(s); break; case 0x10: /* MMC_STAT */ -- 2.17.1