qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Fam Zheng <famz@redhat.com>
To: qemu-devel@nongnu.org
Cc: Paolo Bonzini <pbonzini@redhat.com>,
	vsementsov@virtuozzo.com, qemu-block@nongnu.org,
	Fam Zheng <famz@redhat.com>, Kevin Wolf <kwolf@redhat.com>,
	Max Reitz <mreitz@redhat.com>, Jeff Cody <jcody@redhat.com>,
	Eric Blake <eblake@redhat.com>, John Snow <jsnow@redhat.com>,
	Stefan Hajnoczi <stefanha@redhat.com>
Subject: [Qemu-devel] [PATCH v3 07/10] block: Use common req handling for discard
Date: Tue, 10 Jul 2018 14:31:21 +0800	[thread overview]
Message-ID: <20180710063124.2263-8-famz@redhat.com> (raw)
In-Reply-To: <20180710063124.2263-1-famz@redhat.com>

Reuse the new bdrv_co_write_req_prepare/finish helpers. The variation
here is that discard requests don't affect bs->wr_highest_offset, and it
cannot extend the image.

Signed-off-by: Fam Zheng <famz@redhat.com>
---
 block/io.c | 32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)

diff --git a/block/io.c b/block/io.c
index 10a475302a..cc426bab2e 100644
--- a/block/io.c
+++ b/block/io.c
@@ -1601,15 +1601,31 @@ bdrv_co_write_req_finish(BdrvChild *child, int64_t offset, uint64_t bytes,
 
     atomic_inc(&bs->write_gen);
 
-    stat64_max(&bs->wr_highest_offset, offset + bytes);
-
+    /* Discard cannot extend the image, but in error handling cases, such as
+     * when reverting a qcow2 cluster allocation, the discarded range can pass
+     * the end of image file, so we cannot assert about BDRV_TRACKED_DISCARD
+     * here. Instead, just skip it, since semantically a discard request
+     * beyond EOF cannot expand the image anyway.
+     * */
     if (ret == 0 &&
-        end_sector > bs->total_sectors) {
+        end_sector > bs->total_sectors &&
+        req->type != BDRV_TRACKED_DISCARD)  {
         bs->total_sectors = end_sector;
         bdrv_parent_cb_resize(bs);
         bdrv_dirty_bitmap_truncate(bs, end_sector << BDRV_SECTOR_BITS);
     }
-    bdrv_set_dirty(bs, offset, bytes);
+    if (req->bytes) {
+        switch (req->type) {
+        case BDRV_TRACKED_WRITE:
+            stat64_max(&bs->wr_highest_offset, offset + bytes);
+            /* fall through, to set dirty bits */
+        case BDRV_TRACKED_DISCARD:
+            bdrv_set_dirty(bs, offset, bytes);
+            break;
+        default:
+            break;
+        }
+    }
 }
 
 /*
@@ -2670,10 +2686,7 @@ int coroutine_fn bdrv_co_pdiscard(BdrvChild *child, int64_t offset, int bytes)
     ret = bdrv_check_byte_request(bs, offset, bytes);
     if (ret < 0) {
         return ret;
-    } else if (bs->read_only) {
-        return -EPERM;
     }
-    assert(!(bs->open_flags & BDRV_O_INACTIVE));
 
     /* Do nothing if disabled.  */
     if (!(bs->open_flags & BDRV_O_UNMAP)) {
@@ -2697,7 +2710,7 @@ int coroutine_fn bdrv_co_pdiscard(BdrvChild *child, int64_t offset, int bytes)
     bdrv_inc_in_flight(bs);
     tracked_request_begin(&req, bs, offset, bytes, BDRV_TRACKED_DISCARD);
 
-    ret = notifier_with_return_list_notify(&bs->before_write_notifiers, &req);
+    ret = bdrv_co_write_req_prepare(child, offset, bytes, &req, 0);
     if (ret < 0) {
         goto out;
     }
@@ -2763,8 +2776,7 @@ int coroutine_fn bdrv_co_pdiscard(BdrvChild *child, int64_t offset, int bytes)
     }
     ret = 0;
 out:
-    atomic_inc(&bs->write_gen);
-    bdrv_set_dirty(bs, req.offset, req.bytes);
+    bdrv_co_write_req_finish(child, req.offset, req.bytes, &req, ret);
     tracked_request_end(&req);
     bdrv_dec_in_flight(bs);
     return ret;
-- 
2.17.1

  parent reply	other threads:[~2018-07-10  6:32 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-10  6:31 [Qemu-devel] [PATCH v3 00/10] block: Fix dst reading after tail copy offloading Fam Zheng
2018-07-10  6:31 ` [Qemu-devel] [PATCH v3 01/10] block: Prefix file driver trace points with "file_" Fam Zheng
2018-07-10  6:31 ` [Qemu-devel] [PATCH v3 02/10] block: Add copy offloading trace points Fam Zheng
2018-07-10  6:31 ` [Qemu-devel] [PATCH v3 03/10] block: Use BdrvChild to discard Fam Zheng
2018-07-10  6:31 ` [Qemu-devel] [PATCH v3 04/10] block: Use uint64_t for BdrvTrackedRequest byte fields Fam Zheng
2018-07-10  6:31 ` [Qemu-devel] [PATCH v3 05/10] block: Extract common write req handling Fam Zheng
2018-07-10  6:31 ` [Qemu-devel] [PATCH v3 06/10] block: Fix handling of image enlarging write Fam Zheng
2018-07-10  6:31 ` Fam Zheng [this message]
2018-07-10 14:45   ` [Qemu-devel] [PATCH v3 07/10] block: Use common req handling for discard Kevin Wolf
2018-07-10  6:31 ` [Qemu-devel] [PATCH v3 08/10] block: Use common req handling in copy offloading Fam Zheng
2018-07-10  6:31 ` [Qemu-devel] [PATCH v3 09/10] block: Fix bdrv_co_truncate overlap check Fam Zheng
2018-07-10  6:31 ` [Qemu-devel] [PATCH v3 10/10] block: Use common write req handling in truncate Fam Zheng
2018-07-10 14:46 ` [Qemu-devel] [PATCH v3 00/10] block: Fix dst reading after tail copy offloading Kevin Wolf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180710063124.2263-8-famz@redhat.com \
    --to=famz@redhat.com \
    --cc=eblake@redhat.com \
    --cc=jcody@redhat.com \
    --cc=jsnow@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=mreitz@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    --cc=stefanha@redhat.com \
    --cc=vsementsov@virtuozzo.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).