[Qemu-devel] [PULL 00/15] migration queue

[Qemu-devel] [PULL 00/15] migration queue

[Dr. David Alan Gilbert (git)]

From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>

The following changes since commit 2b83714d4ea659899069a4b94aa2dfadc847a013:

  target/arm: Use correct mmu_idx for exception-return unstacking (2018-07-10 10:54:40 +0100)

are available in the Git repository at:

  git://github.com/dagrh/qemu.git tags/pull-migration-20180710a

for you to fetch changes up to 858b6d62249a9a9510fae6c808a3d2de80e689b5:

  migration: reorder MIG_CMD_POSTCOPY_RESUME (2018-07-10 15:23:23 +0100)

----------------------------------------------------------------
Migration pull 2018-07-10 (for 3.0)

Migration fixes and migration test fixes, mostly
around postcopy and postcopy recovery

----------------------------------------------------------------
Peter Xu (15):
      migration: delay postcopy paused state
      migration: move income process out of multifd
      migration: unbreak postcopy recovery
      migration: unify incoming processing
      migration: simplify check to use qemu file buffer
      migration: loosen recovery check when load vm
      migration: fix incorrect bitmap size calculation
      migration: show pause/recover state on dst host
      tests: introduce migrate_postcopy_* helpers
      tests: allow migrate() to take extra flags
      tests: introduce migrate_query*() helpers
      tests: introduce wait_for_migration_status()
      tests: add postcopy recovery test
      tests: hide stderr for postcopy recovery test
      migration: reorder MIG_CMD_POSTCOPY_RESUME

 migration/exec.c       |   3 -
 migration/fd.c         |   3 -
 migration/migration.c  |  46 +++++++++--
 migration/ram.c        |  32 ++++----
 migration/ram.h        |   2 +-
 migration/savevm.c     |  24 +++---
 migration/socket.c     |   5 --
 tests/migration-test.c | 211 +++++++++++++++++++++++++++++++++++++++----------
 8 files changed, 238 insertions(+), 88 deletions(-)

[Qemu-devel] [PULL 01/15] migration: delay postcopy paused state

[Dr. David Alan Gilbert (git)]

From: Peter Xu <peterx@redhat.com>

Before this patch we firstly setup the postcopy-paused state then we
clean up the QEMUFile handles.  That can be racy if there is a very fast
"migrate-recover" command running in parallel.  Fix that up.

Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180627132246.5576-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
 migration/savevm.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/migration/savevm.c b/migration/savevm.c
index c2f34ffc7c..851d74e8b6 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -2194,9 +2194,6 @@ static bool postcopy_pause_incoming(MigrationIncomingState *mis)
     /* Clear the triggered bit to allow one recovery */
     mis->postcopy_recover_triggered = false;
 
-    migrate_set_state(&mis->state, MIGRATION_STATUS_POSTCOPY_ACTIVE,
-                      MIGRATION_STATUS_POSTCOPY_PAUSED);
-
     assert(mis->from_src_file);
     qemu_file_shutdown(mis->from_src_file);
     qemu_fclose(mis->from_src_file);
@@ -2209,6 +2206,9 @@ static bool postcopy_pause_incoming(MigrationIncomingState *mis)
     mis->to_src_file = NULL;
     qemu_mutex_unlock(&mis->rp_mutex);
 
+    migrate_set_state(&mis->state, MIGRATION_STATUS_POSTCOPY_ACTIVE,
+                      MIGRATION_STATUS_POSTCOPY_PAUSED);
+
     /* Notify the fault thread for the invalidated file handle */
     postcopy_fault_thread_notify(mis);
 
-- 
2.17.1

[Qemu-devel] [PULL 02/15] migration: move income process out of multifd

[Dr. David Alan Gilbert (git)]

From: Peter Xu <peterx@redhat.com>

Move the call to migration_incoming_process() out of multifd code.  It's
a bit strange that we can migration generic calls in multifd code.
Instead, let multifd_recv_new_channel() return a boolean showing whether
it's ready to continue the incoming migration.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180627132246.5576-3-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
 migration/migration.c |  5 ++++-
 migration/ram.c       | 11 +++++------
 migration/ram.h       |  2 +-
 3 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/migration/migration.c b/migration/migration.c
index 94d71f8b24..aea6fb7444 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -507,7 +507,10 @@ void migration_ioc_process_incoming(QIOChannel *ioc)
         migration_incoming_setup(f);
         return;
     }
-    multifd_recv_new_channel(ioc);
+
+    if (multifd_recv_new_channel(ioc)) {
+        migration_incoming_process();
+    }
 }
 
 /**
diff --git a/migration/ram.c b/migration/ram.c
index 1cd98d6398..23cea47090 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -1311,7 +1311,8 @@ bool multifd_recv_all_channels_created(void)
     return thread_count == atomic_read(&multifd_recv_state->count);
 }
 
-void multifd_recv_new_channel(QIOChannel *ioc)
+/* Return true if multifd is ready for the migration, otherwise false */
+bool multifd_recv_new_channel(QIOChannel *ioc)
 {
     MultiFDRecvParams *p;
     Error *local_err = NULL;
@@ -1320,7 +1321,7 @@ void multifd_recv_new_channel(QIOChannel *ioc)
     id = multifd_recv_initial_packet(ioc, &local_err);
     if (id < 0) {
         multifd_recv_terminate_threads(local_err);
-        return;
+        return false;
     }
 
     p = &multifd_recv_state->params[id];
@@ -1328,7 +1329,7 @@ void multifd_recv_new_channel(QIOChannel *ioc)
         error_setg(&local_err, "multifd: received id '%d' already setup'",
                    id);
         multifd_recv_terminate_threads(local_err);
-        return;
+        return false;
     }
     p->c = ioc;
     object_ref(OBJECT(ioc));
@@ -1339,9 +1340,7 @@ void multifd_recv_new_channel(QIOChannel *ioc)
     qemu_thread_create(&p->thread, p->name, multifd_recv_thread, p,
                        QEMU_THREAD_JOINABLE);
     atomic_inc(&multifd_recv_state->count);
-    if (multifd_recv_state->count == migrate_multifd_channels()) {
-        migration_incoming_process();
-    }
+    return multifd_recv_state->count == migrate_multifd_channels();
 }
 
 /**
diff --git a/migration/ram.h b/migration/ram.h
index d386f4d641..457bf54b8c 100644
--- a/migration/ram.h
+++ b/migration/ram.h
@@ -46,7 +46,7 @@ int multifd_save_cleanup(Error **errp);
 int multifd_load_setup(void);
 int multifd_load_cleanup(Error **errp);
 bool multifd_recv_all_channels_created(void);
-void multifd_recv_new_channel(QIOChannel *ioc);
+bool multifd_recv_new_channel(QIOChannel *ioc);
 
 uint64_t ram_pagesize_summary(void);
 int ram_save_queue_pages(const char *rbname, ram_addr_t start, ram_addr_t len);
-- 
2.17.1

[Qemu-devel] [PULL 03/15] migration: unbreak postcopy recovery

[Dr. David Alan Gilbert (git)]

From: Peter Xu <peterx@redhat.com>

The whole postcopy recovery logic was accidentally broken.  We need to
fix it in two steps.

This is the first step that we should do the recovery when needed.  It
was bypassed before after commit 36c2f8be2c.

Introduce postcopy_try_recovery() helper for the postcopy recovery
logic.  Call it both in migration_fd_process_incoming() and
migration_ioc_process_incoming().

Fixes: 36c2f8be2c ("migration: Delay start of migration main routines")
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180627132246.5576-4-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
 migration/migration.c | 23 ++++++++++++++++++-----
 1 file changed, 18 insertions(+), 5 deletions(-)

diff --git a/migration/migration.c b/migration/migration.c
index aea6fb7444..eb3e09e899 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -466,7 +466,8 @@ void migration_incoming_process(void)
     qemu_coroutine_enter(co);
 }
 
-void migration_fd_process_incoming(QEMUFile *f)
+/* Returns true if recovered from a paused migration, otherwise false */
+static bool postcopy_try_recover(QEMUFile *f)
 {
     MigrationIncomingState *mis = migration_incoming_get_current();
 
@@ -491,11 +492,20 @@ void migration_fd_process_incoming(QEMUFile *f)
          * that source is ready to reply to page requests.
          */
         qemu_sem_post(&mis->postcopy_pause_sem_dst);
-    } else {
-        /* New incoming migration */
-        migration_incoming_setup(f);
-        migration_incoming_process();
+        return true;
+    }
+
+    return false;
+}
+
+void migration_fd_process_incoming(QEMUFile *f)
+{
+    if (postcopy_try_recover(f)) {
+        return;
     }
+
+    migration_incoming_setup(f);
+    migration_incoming_process();
 }
 
 void migration_ioc_process_incoming(QIOChannel *ioc)
@@ -504,6 +514,9 @@ void migration_ioc_process_incoming(QIOChannel *ioc)
 
     if (!mis->from_src_file) {
         QEMUFile *f = qemu_fopen_channel_input(ioc);
+        if (postcopy_try_recover(f)) {
+            return;
+        }
         migration_incoming_setup(f);
         return;
     }
-- 
2.17.1

[Qemu-devel] [PULL 04/15] migration: unify incoming processing

[Dr. David Alan Gilbert (git)]

From: Peter Xu <peterx@redhat.com>

This is the 2nd patch to unbreak postcopy recovery.

Let's unify the migration_incoming_process() call at a single place
rather than calling it in connection setup codes.  This fixes a problem
that we will go into incoming migration procedure even if we are trying
to recovery from a paused postcopy migration.

Fixes: 36c2f8be2c ("migration: Delay start of migration main routines")
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180627132246.5576-5-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
 migration/exec.c      |  3 ---
 migration/fd.c        |  3 ---
 migration/migration.c | 18 ++++++++++++++++--
 migration/socket.c    |  5 -----
 4 files changed, 16 insertions(+), 13 deletions(-)

diff --git a/migration/exec.c b/migration/exec.c
index 0bbeb63c97..375d2e1b54 100644
--- a/migration/exec.c
+++ b/migration/exec.c
@@ -49,9 +49,6 @@ static gboolean exec_accept_incoming_migration(QIOChannel *ioc,
 {
     migration_channel_process_incoming(ioc);
     object_unref(OBJECT(ioc));
-    if (!migrate_use_multifd()) {
-        migration_incoming_process();
-    }
     return G_SOURCE_REMOVE;
 }
 
diff --git a/migration/fd.c b/migration/fd.c
index fee34ffdc0..a7c13df4ad 100644
--- a/migration/fd.c
+++ b/migration/fd.c
@@ -49,9 +49,6 @@ static gboolean fd_accept_incoming_migration(QIOChannel *ioc,
 {
     migration_channel_process_incoming(ioc);
     object_unref(OBJECT(ioc));
-    if (!migrate_use_multifd()) {
-        migration_incoming_process();
-    }
     return G_SOURCE_REMOVE;
 }
 
diff --git a/migration/migration.c b/migration/migration.c
index eb3e09e899..0404c53215 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -511,17 +511,31 @@ void migration_fd_process_incoming(QEMUFile *f)
 void migration_ioc_process_incoming(QIOChannel *ioc)
 {
     MigrationIncomingState *mis = migration_incoming_get_current();
+    bool start_migration;
 
     if (!mis->from_src_file) {
+        /* The first connection (multifd may have multiple) */
         QEMUFile *f = qemu_fopen_channel_input(ioc);
+
+        /* If it's a recovery, we're done */
         if (postcopy_try_recover(f)) {
             return;
         }
+
         migration_incoming_setup(f);
-        return;
+
+        /*
+         * Common migration only needs one channel, so we can start
+         * right now.  Multifd needs more than one channel, we wait.
+         */
+        start_migration = !migrate_use_multifd();
+    } else {
+        /* Multiple connections */
+        assert(migrate_use_multifd());
+        start_migration = multifd_recv_new_channel(ioc);
     }
 
-    if (multifd_recv_new_channel(ioc)) {
+    if (start_migration) {
         migration_incoming_process();
     }
 }
diff --git a/migration/socket.c b/migration/socket.c
index 3456eb76e9..f4c8174400 100644
--- a/migration/socket.c
+++ b/migration/socket.c
@@ -168,12 +168,7 @@ static void socket_accept_incoming_migration(QIONetListener *listener,
     if (migration_has_all_channels()) {
         /* Close listening socket as its no longer needed */
         qio_net_listener_disconnect(listener);
-
         object_unref(OBJECT(listener));
-
-        if (!migrate_use_multifd()) {
-            migration_incoming_process();
-        }
     }
 }
 
-- 
2.17.1

[Qemu-devel] [PULL 05/15] migration: simplify check to use qemu file buffer

[Dr. David Alan Gilbert (git)]

From: Peter Xu <peterx@redhat.com>

Firstly, renaming the old matching_page_sizes variable to
matches_target_page_size, which suites more to what it did (it only
checks against target page size rather than multiple page sizes).
Meanwhile, simplify the check logic a bit, and enhance the comments.
Should have no functional change.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
 migration/ram.c | 17 +++++++++++------
 1 file changed, 11 insertions(+), 6 deletions(-)

diff --git a/migration/ram.c b/migration/ram.c
index 23cea47090..49068e86d3 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -3580,7 +3580,7 @@ static int ram_load_postcopy(QEMUFile *f)
 {
     int flags = 0, ret = 0;
     bool place_needed = false;
-    bool matching_page_sizes = false;
+    bool matches_target_page_size = false;
     MigrationIncomingState *mis = migration_incoming_get_current();
     /* Temporary page that is later 'placed' */
     void *postcopy_host_page = postcopy_get_tmp_page(mis);
@@ -3620,7 +3620,7 @@ static int ram_load_postcopy(QEMUFile *f)
                 ret = -EINVAL;
                 break;
             }
-            matching_page_sizes = block->page_size == TARGET_PAGE_SIZE;
+            matches_target_page_size = block->page_size == TARGET_PAGE_SIZE;
             /*
              * Postcopy requires that we place whole host pages atomically;
              * these may be huge pages for RAMBlocks that are backed by
@@ -3668,12 +3668,17 @@ static int ram_load_postcopy(QEMUFile *f)
 
         case RAM_SAVE_FLAG_PAGE:
             all_zero = false;
-            if (!place_needed || !matching_page_sizes) {
+            if (!matches_target_page_size) {
+                /* For huge pages, we always use temporary buffer */
                 qemu_get_buffer(f, page_buffer, TARGET_PAGE_SIZE);
             } else {
-                /* Avoids the qemu_file copy during postcopy, which is
-                 * going to do a copy later; can only do it when we
-                 * do this read in one go (matching page sizes)
+                /*
+                 * For small pages that matches target page size, we
+                 * avoid the qemu_file copy.  Instead we directly use
+                 * the buffer of QEMUFile to place the page.  Note: we
+                 * cannot do any QEMUFile operation before using that
+                 * buffer to make sure the buffer is valid when
+                 * placing the page.
                  */
                 qemu_get_buffer_in_place(f, (uint8_t **)&place_source,
                                          TARGET_PAGE_SIZE);
-- 
2.17.1

[Qemu-devel] [PULL 06/15] migration: loosen recovery check when load vm

[Dr. David Alan Gilbert (git)]

From: Peter Xu <peterx@redhat.com>

We were checking against -EIO, assuming that it will cover all IO
failures.  But actually it is not.  One example is that in
qemu_loadvm_section_start_full() we can have tons of places that will
return -EINVAL even if the error is caused by IO failures on the
network.

Let's loosen the recovery check logic here to cover all the error cases
happened by removing the explicit check against -EIO.  After all we
won't lose anything here if any other failure happened.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-3-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
 migration/savevm.c | 16 ++++++----------
 1 file changed, 6 insertions(+), 10 deletions(-)

diff --git a/migration/savevm.c b/migration/savevm.c
index 851d74e8b6..efcc795071 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -2276,18 +2276,14 @@ out:
         qemu_file_set_error(f, ret);
 
         /*
-         * Detect whether it is:
-         *
-         * 1. postcopy running (after receiving all device data, which
-         *    must be in POSTCOPY_INCOMING_RUNNING state.  Note that
-         *    POSTCOPY_INCOMING_LISTENING is still not enough, it's
-         *    still receiving device states).
-         * 2. network failure (-EIO)
-         *
-         * If so, we try to wait for a recovery.
+         * If we are during an active postcopy, then we pause instead
+         * of bail out to at least keep the VM's dirty data.  Note
+         * that POSTCOPY_INCOMING_LISTENING stage is still not enough,
+         * during which we're still receiving device states and we
+         * still haven't yet started the VM on destination.
          */
         if (postcopy_state_get() == POSTCOPY_INCOMING_RUNNING &&
-            ret == -EIO && postcopy_pause_incoming(mis)) {
+            postcopy_pause_incoming(mis)) {
             /* Reset f to point to the newly created channel */
             f = mis->from_src_file;
             goto retry;
-- 
2.17.1

[Qemu-devel] [PULL 07/15] migration: fix incorrect bitmap size calculation

[Dr. David Alan Gilbert (git)]

From: Peter Xu <peterx@redhat.com>

The calculation on size of received bitmap is incorrect for postcopy
recovery.  Here we wanted to let the size to cover all the valid bits in
the bitmap, we should use DIV_ROUND_UP() instead of a division.

For example, a RAMBlock with size=4K (which contains only one single 4K
page) will have nbits=1, then nbits/8=0, then the real bitmap won't be
sent to source at all.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-4-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
 migration/ram.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/migration/ram.c b/migration/ram.c
index 49068e86d3..52dd678092 100644
--- a/migration/ram.c
+++ b/migration/ram.c
@@ -235,7 +235,7 @@ int64_t ramblock_recv_bitmap_send(QEMUFile *file,
     bitmap_to_le(le_bitmap, block->receivedmap, nbits);
 
     /* Size of the bitmap, in bytes */
-    size = nbits / 8;
+    size = DIV_ROUND_UP(nbits, 8);
 
     /*
      * size is always aligned to 8 bytes for 64bit machines, but it
@@ -3944,7 +3944,7 @@ int ram_dirty_bitmap_reload(MigrationState *s, RAMBlock *block)
     int ret = -EINVAL;
     QEMUFile *file = s->rp_state.from_dst_file;
     unsigned long *le_bitmap, nbits = block->used_length >> TARGET_PAGE_BITS;
-    uint64_t local_size = nbits / 8;
+    uint64_t local_size = DIV_ROUND_UP(nbits, 8);
     uint64_t size, end_mark;
 
     trace_ram_dirty_bitmap_reload_begin(block->idstr);
-- 
2.17.1

[Qemu-devel] [PULL 08/15] migration: show pause/recover state on dst host

[Dr. David Alan Gilbert (git)]

From: Peter Xu <peterx@redhat.com>

These two states will be missing when doing "query-migrate" on
destination VM.  Add these states so that we can get the query results
as expected.

Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-5-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
 migration/migration.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/migration/migration.c b/migration/migration.c
index 0404c53215..8d56d56930 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -911,6 +911,8 @@ static void fill_destination_migration_info(MigrationInfo *info)
     case MIGRATION_STATUS_CANCELLED:
     case MIGRATION_STATUS_ACTIVE:
     case MIGRATION_STATUS_POSTCOPY_ACTIVE:
+    case MIGRATION_STATUS_POSTCOPY_PAUSED:
+    case MIGRATION_STATUS_POSTCOPY_RECOVER:
     case MIGRATION_STATUS_FAILED:
     case MIGRATION_STATUS_COLO:
         info->has_status = true;
-- 
2.17.1

[Qemu-devel] [PULL 09/15] tests: introduce migrate_postcopy_* helpers

[Dr. David Alan Gilbert (git)]

From: Peter Xu <peterx@redhat.com>

Separate the old postcopy UNIX socket test into three steps, provide a
helper for each step.  With these helpers, we can do more compliated
tests like postcopy recovery, while keep the codes shared.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-6-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
  Fix up merge with 2e295789 / Skip tests for ppc tcg
---
 tests/migration-test.c | 42 +++++++++++++++++++++++++++++++-----------
 1 file changed, 31 insertions(+), 11 deletions(-)

diff --git a/tests/migration-test.c b/tests/migration-test.c
index 331efb0fe5..193c7df94e 100644
--- a/tests/migration-test.c
+++ b/tests/migration-test.c
@@ -351,13 +351,19 @@ static void migrate(QTestState *who, const char *uri)
     qobject_unref(rsp);
 }
 
-static void migrate_start_postcopy(QTestState *who)
+static void migrate_postcopy_start(QTestState *from, QTestState *to)
 {
     QDict *rsp;
 
-    rsp = wait_command(who, "{ 'execute': 'migrate-start-postcopy' }");
+    rsp = wait_command(from, "{ 'execute': 'migrate-start-postcopy' }");
     g_assert(qdict_haskey(rsp, "return"));
     qobject_unref(rsp);
+
+    if (!got_stop) {
+        qtest_qmp_eventwait(from, "STOP");
+    }
+
+    qtest_qmp_eventwait(to, "RESUME");
 }
 
 static int test_migrate_start(QTestState **from, QTestState **to,
@@ -510,13 +516,14 @@ static void test_deprecated(void)
     qtest_quit(from);
 }
 
-static void test_postcopy(void)
+static int migrate_postcopy_prepare(QTestState **from_ptr,
+                                     QTestState **to_ptr)
 {
     char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs);
     QTestState *from, *to;
 
     if (test_migrate_start(&from, &to, uri, false)) {
-        return;
+        return -1;
     }
 
     migrate_set_capability(from, "postcopy-ram", "true");
@@ -534,28 +541,41 @@ static void test_postcopy(void)
     wait_for_serial("src_serial");
 
     migrate(from, uri);
+    g_free(uri);
 
     wait_for_migration_pass(from);
 
-    migrate_start_postcopy(from);
+    *from_ptr = from;
+    *to_ptr = to;
 
-    if (!got_stop) {
-        qtest_qmp_eventwait(from, "STOP");
-    }
+    return 0;
+}
 
-    qtest_qmp_eventwait(to, "RESUME");
+static void migrate_postcopy_complete(QTestState *from, QTestState *to)
+{
+    wait_for_migration_complete(from);
 
+    /* Make sure we get at least one "B" on destination */
     wait_for_serial("dest_serial");
-    wait_for_migration_complete(from);
 
     if (uffd_feature_thread_id) {
         read_blocktime(to);
     }
-    g_free(uri);
 
     test_migrate_end(from, to, true);
 }
 
+static void test_postcopy(void)
+{
+    QTestState *from, *to;
+
+    if (migrate_postcopy_prepare(&from, &to)) {
+        return;
+    }
+    migrate_postcopy_start(from, to);
+    migrate_postcopy_complete(from, to);
+}
+
 static void test_baddest(void)
 {
     QTestState *from, *to;
-- 
2.17.1

[Qemu-devel] [PULL 10/15] tests: allow migrate() to take extra flags

[Dr. David Alan Gilbert (git)]

From: Peter Xu <peterx@redhat.com>

For example, we can pass in '"resume": true' to resume a migration.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-7-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
 tests/migration-test.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/tests/migration-test.c b/tests/migration-test.c
index 193c7df94e..0a1e2f0a09 100644
--- a/tests/migration-test.c
+++ b/tests/migration-test.c
@@ -337,14 +337,14 @@ static void migrate_set_capability(QTestState *who, const char *capability,
     qobject_unref(rsp);
 }
 
-static void migrate(QTestState *who, const char *uri)
+static void migrate(QTestState *who, const char *uri, const char *extra)
 {
     QDict *rsp;
     gchar *cmd;
 
     cmd = g_strdup_printf("{ 'execute': 'migrate',"
-                          "'arguments': { 'uri': '%s' } }",
-                          uri);
+                          "  'arguments': { 'uri': '%s' %s } }",
+                          uri, extra ? extra : "");
     rsp = qtest_qmp(who, cmd);
     g_free(cmd);
     g_assert(qdict_haskey(rsp, "return"));
@@ -540,7 +540,7 @@ static int migrate_postcopy_prepare(QTestState **from_ptr,
     /* Wait for the first serial output from the source */
     wait_for_serial("src_serial");
 
-    migrate(from, uri);
+    migrate(from, uri, NULL);
     g_free(uri);
 
     wait_for_migration_pass(from);
@@ -586,7 +586,7 @@ static void test_baddest(void)
     if (test_migrate_start(&from, &to, "tcp:0:0", true)) {
         return;
     }
-    migrate(from, "tcp:0:0");
+    migrate(from, "tcp:0:0", NULL);
     do {
         rsp = wait_command(from, "{ 'execute': 'query-migrate' }");
         rsp_return = qdict_get_qdict(rsp, "return");
@@ -630,7 +630,7 @@ static void test_precopy_unix(void)
     /* Wait for the first serial output from the source */
     wait_for_serial("src_serial");
 
-    migrate(from, uri);
+    migrate(from, uri, NULL);
 
     wait_for_migration_pass(from);
 
-- 
2.17.1

[Qemu-devel] [PULL 11/15] tests: introduce migrate_query*() helpers

[Dr. David Alan Gilbert (git)]

From: Peter Xu <peterx@redhat.com>

Introduce helpers to query migration states and use it.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-8-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
 tests/migration-test.c | 64 ++++++++++++++++++++++++++++--------------
 1 file changed, 43 insertions(+), 21 deletions(-)

diff --git a/tests/migration-test.c b/tests/migration-test.c
index 0a1e2f0a09..e2697efd01 100644
--- a/tests/migration-test.c
+++ b/tests/migration-test.c
@@ -168,6 +168,37 @@ static QDict *wait_command(QTestState *who, const char *command)
     return response;
 }
 
+/*
+ * Note: caller is responsible to free the returned object via
+ * qobject_unref() after use
+ */
+static QDict *migrate_query(QTestState *who)
+{
+    QDict *rsp, *rsp_return;
+
+    rsp = wait_command(who, "{ 'execute': 'query-migrate' }");
+    rsp_return = qdict_get_qdict(rsp, "return");
+    g_assert(rsp_return);
+    qobject_ref(rsp_return);
+    qobject_unref(rsp);
+
+    return rsp_return;
+}
+
+/*
+ * Note: caller is responsible to free the returned object via
+ * g_free() after use
+ */
+static gchar *migrate_query_status(QTestState *who)
+{
+    QDict *rsp_return = migrate_query(who);
+    gchar *status = g_strdup(qdict_get_str(rsp_return, "status"));
+
+    g_assert(status);
+    qobject_unref(rsp_return);
+
+    return status;
+}
 
 /*
  * It's tricky to use qemu's migration event capability with qtest,
@@ -176,11 +207,10 @@ static QDict *wait_command(QTestState *who, const char *command)
 
 static uint64_t get_migration_pass(QTestState *who)
 {
-    QDict *rsp, *rsp_return, *rsp_ram;
+    QDict *rsp_return, *rsp_ram;
     uint64_t result;
 
-    rsp = wait_command(who, "{ 'execute': 'query-migrate' }");
-    rsp_return = qdict_get_qdict(rsp, "return");
+    rsp_return = migrate_query(who);
     if (!qdict_haskey(rsp_return, "ram")) {
         /* Still in setup */
         result = 0;
@@ -188,33 +218,29 @@ static uint64_t get_migration_pass(QTestState *who)
         rsp_ram = qdict_get_qdict(rsp_return, "ram");
         result = qdict_get_try_int(rsp_ram, "dirty-sync-count", 0);
     }
-    qobject_unref(rsp);
+    qobject_unref(rsp_return);
     return result;
 }
 
 static void read_blocktime(QTestState *who)
 {
-    QDict *rsp, *rsp_return;
+    QDict *rsp_return;
 
-    rsp = wait_command(who, "{ 'execute': 'query-migrate' }");
-    rsp_return = qdict_get_qdict(rsp, "return");
+    rsp_return = migrate_query(who);
     g_assert(qdict_haskey(rsp_return, "postcopy-blocktime"));
-    qobject_unref(rsp);
+    qobject_unref(rsp_return);
 }
 
 static void wait_for_migration_complete(QTestState *who)
 {
     while (true) {
-        QDict *rsp, *rsp_return;
         bool completed;
-        const char *status;
+        char *status;
 
-        rsp = wait_command(who, "{ 'execute': 'query-migrate' }");
-        rsp_return = qdict_get_qdict(rsp, "return");
-        status = qdict_get_str(rsp_return, "status");
+        status = migrate_query_status(who);
         completed = strcmp(status, "completed") == 0;
         g_assert_cmpstr(status, !=,  "failed");
-        qobject_unref(rsp);
+        g_free(status);
         if (completed) {
             return;
         }
@@ -580,7 +606,7 @@ static void test_baddest(void)
 {
     QTestState *from, *to;
     QDict *rsp, *rsp_return;
-    const char *status;
+    char *status;
     bool failed;
 
     if (test_migrate_start(&from, &to, "tcp:0:0", true)) {
@@ -588,14 +614,10 @@ static void test_baddest(void)
     }
     migrate(from, "tcp:0:0", NULL);
     do {
-        rsp = wait_command(from, "{ 'execute': 'query-migrate' }");
-        rsp_return = qdict_get_qdict(rsp, "return");
-
-        status = qdict_get_str(rsp_return, "status");
-
+        status = migrate_query_status(from);
         g_assert(!strcmp(status, "setup") || !(strcmp(status, "failed")));
         failed = !strcmp(status, "failed");
-        qobject_unref(rsp);
+        g_free(status);
     } while (!failed);
 
     /* Is the machine currently running? */
-- 
2.17.1

[Qemu-devel] [PULL 12/15] tests: introduce wait_for_migration_status()

[Dr. David Alan Gilbert (git)]

From: Peter Xu <peterx@redhat.com>

It's generalized from wait_for_migration_complete() to allow us to wait
for any migration status besides failure.

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-9-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
 tests/migration-test.c | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/tests/migration-test.c b/tests/migration-test.c
index e2697efd01..4c15071893 100644
--- a/tests/migration-test.c
+++ b/tests/migration-test.c
@@ -231,14 +231,15 @@ static void read_blocktime(QTestState *who)
     qobject_unref(rsp_return);
 }
 
-static void wait_for_migration_complete(QTestState *who)
+static void wait_for_migration_status(QTestState *who,
+                                      const char *goal)
 {
     while (true) {
         bool completed;
         char *status;
 
         status = migrate_query_status(who);
-        completed = strcmp(status, "completed") == 0;
+        completed = strcmp(status, goal) == 0;
         g_assert_cmpstr(status, !=,  "failed");
         g_free(status);
         if (completed) {
@@ -248,6 +249,11 @@ static void wait_for_migration_complete(QTestState *who)
     }
 }
 
+static void wait_for_migration_complete(QTestState *who)
+{
+    wait_for_migration_status(who, "completed");
+}
+
 static void wait_for_migration_pass(QTestState *who)
 {
     uint64_t initial_pass = get_migration_pass(who);
-- 
2.17.1

[Qemu-devel] [PULL 13/15] tests: add postcopy recovery test

[Dr. David Alan Gilbert (git)]

From: Peter Xu <peterx@redhat.com>

Test the postcopy recovery procedure by emulating a network failure
using migrate-pause command.

Tested-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-10-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
 tests/migration-test.c | 80 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 80 insertions(+)

diff --git a/tests/migration-test.c b/tests/migration-test.c
index 4c15071893..d8b2633fce 100644
--- a/tests/migration-test.c
+++ b/tests/migration-test.c
@@ -352,6 +352,29 @@ static void migrate_set_parameter(QTestState *who, const char *parameter,
     migrate_check_parameter(who, parameter, value);
 }
 
+static void migrate_pause(QTestState *who)
+{
+    QDict *rsp;
+
+    rsp = wait_command(who, "{ 'execute': 'migrate-pause' }");
+    g_assert(qdict_haskey(rsp, "return"));
+    qobject_unref(rsp);
+}
+
+static void migrate_recover(QTestState *who, const char *uri)
+{
+    QDict *rsp;
+    gchar *cmd = g_strdup_printf(
+        "{ 'execute': 'migrate-recover', "
+        "  'id': 'recover-cmd', "
+        "  'arguments': { 'uri': '%s' } }", uri);
+
+    rsp = wait_command(who, cmd);
+    g_assert(qdict_haskey(rsp, "return"));
+    g_free(cmd);
+    qobject_unref(rsp);
+}
+
 static void migrate_set_capability(QTestState *who, const char *capability,
                                    const char *value)
 {
@@ -608,6 +631,62 @@ static void test_postcopy(void)
     migrate_postcopy_complete(from, to);
 }
 
+static void test_postcopy_recovery(void)
+{
+    QTestState *from, *to;
+    char *uri;
+
+    if (migrate_postcopy_prepare(&from, &to)) {
+        return;
+    }
+
+    /* Turn postcopy speed down, 4K/s is slow enough on any machines */
+    migrate_set_parameter(from, "max-postcopy-bandwidth", "4096");
+
+    /* Now we start the postcopy */
+    migrate_postcopy_start(from, to);
+
+    /*
+     * Wait until postcopy is really started; we can only run the
+     * migrate-pause command during a postcopy
+     */
+    wait_for_migration_status(from, "postcopy-active");
+
+    /*
+     * Manually stop the postcopy migration. This emulates a network
+     * failure with the migration socket
+     */
+    migrate_pause(from);
+
+    /*
+     * Wait for destination side to reach postcopy-paused state.  The
+     * migrate-recover command can only succeed if destination machine
+     * is in the paused state
+     */
+    wait_for_migration_status(to, "postcopy-paused");
+
+    /*
+     * Create a new socket to emulate a new channel that is different
+     * from the broken migration channel; tell the destination to
+     * listen to the new port
+     */
+    uri = g_strdup_printf("unix:%s/migsocket-recover", tmpfs);
+    migrate_recover(to, uri);
+
+    /*
+     * Try to rebuild the migration channel using the resume flag and
+     * the newly created channel
+     */
+    wait_for_migration_status(from, "postcopy-paused");
+    migrate(from, uri, ", 'resume': true");
+    g_free(uri);
+
+    /* Restore the postcopy bandwidth to unlimited */
+    migrate_set_parameter(from, "max-postcopy-bandwidth", "0");
+
+    migrate_postcopy_complete(from, to);
+}
+
 static void test_baddest(void)
 {
     QTestState *from, *to;
@@ -698,6 +777,7 @@ int main(int argc, char **argv)
     module_call_init(MODULE_INIT_QOM);
 
     qtest_add_func("/migration/postcopy/unix", test_postcopy);
+    qtest_add_func("/migration/postcopy/recovery", test_postcopy_recovery);
     qtest_add_func("/migration/deprecated", test_deprecated);
     qtest_add_func("/migration/bad_dest", test_baddest);
     qtest_add_func("/migration/precopy/unix", test_precopy_unix);
-- 
2.17.1

[Qemu-devel] [PULL 14/15] tests: hide stderr for postcopy recovery test

[Dr. David Alan Gilbert (git)]

From: Peter Xu <peterx@redhat.com>

We dumped something when network failure happens.  We should avoid those
messages to be dumped when running the tests:

  $ ./tests/migration-test -p /x86_64/migration/postcopy/recovery
  /x86_64/migration/postcopy/recovery: qemu-system-x86_64: check_section_footer: Read section footer failed: -5
  qemu-system-x86_64: Detected IO failure for postcopy. Migration paused.
  qemu-system-x86_64: Detected IO failure for postcopy. Migration paused.
  OK

After the patch:

  $ ./tests/migration-test -p /x86_64/migration/postcopy/recovery
  /x86_64/migration/postcopy/recovery: OK

Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-11-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
 tests/migration-test.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/tests/migration-test.c b/tests/migration-test.c
index d8b2633fce..086f727b34 100644
--- a/tests/migration-test.c
+++ b/tests/migration-test.c
@@ -572,12 +572,13 @@ static void test_deprecated(void)
 }
 
 static int migrate_postcopy_prepare(QTestState **from_ptr,
-                                     QTestState **to_ptr)
+                                     QTestState **to_ptr,
+                                     bool hide_error)
 {
     char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs);
     QTestState *from, *to;
 
-    if (test_migrate_start(&from, &to, uri, false)) {
+    if (test_migrate_start(&from, &to, uri, hide_error)) {
         return -1;
     }
 
@@ -624,7 +625,7 @@ static void test_postcopy(void)
 {
     QTestState *from, *to;
 
-    if (migrate_postcopy_prepare(&from, &to)) {
+    if (migrate_postcopy_prepare(&from, &to, false)) {
         return;
     }
     migrate_postcopy_start(from, to);
@@ -636,7 +637,7 @@ static void test_postcopy_recovery(void)
     QTestState *from, *to;
     char *uri;
 
-    if (migrate_postcopy_prepare(&from, &to)) {
+    if (migrate_postcopy_prepare(&from, &to, true)) {
         return;
     }
 
-- 
2.17.1

[Qemu-devel] [PULL 15/15] migration: reorder MIG_CMD_POSTCOPY_RESUME

[Dr. David Alan Gilbert (git)]

From: Peter Xu <peterx@redhat.com>

It was accidently added before MIG_CMD_PACKAGED so it might break
command compatibility when we run postcopy migration between old/new
QEMUs.  Fix that up quickly before the QEMU 3.0 release.

Reported-by: Lukáš Doktor <ldoktor@redhat.com>
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710094424.30754-1-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
---
 migration/savevm.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/migration/savevm.c b/migration/savevm.c
index efcc795071..7f92567a10 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -81,8 +81,8 @@ enum qemu_vm_cmd {
     MIG_CMD_POSTCOPY_RAM_DISCARD,  /* A list of pages to discard that
                                       were previously sent during
                                       precopy but are dirty. */
-    MIG_CMD_POSTCOPY_RESUME,       /* resume postcopy on dest */
     MIG_CMD_PACKAGED,          /* Send a wrapped stream within this stream */
+    MIG_CMD_POSTCOPY_RESUME,   /* resume postcopy on dest */
     MIG_CMD_RECV_BITMAP,       /* Request for recved bitmap on dst */
     MIG_CMD_MAX
 };
-- 
2.17.1

Re: [Qemu-devel] [PULL 00/15] migration queue

[Peter Maydell]

On 10 July 2018 at 16:30, Dr. David Alan Gilbert (git)
<dgilbert@redhat.com> wrote:
> From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
>
> The following changes since commit 2b83714d4ea659899069a4b94aa2dfadc847a013:
>
>   target/arm: Use correct mmu_idx for exception-return unstacking (2018-07-10 10:54:40 +0100)
>
> are available in the Git repository at:
>
>   git://github.com/dagrh/qemu.git tags/pull-migration-20180710a
>
> for you to fetch changes up to 858b6d62249a9a9510fae6c808a3d2de80e689b5:
>
>   migration: reorder MIG_CMD_POSTCOPY_RESUME (2018-07-10 15:23:23 +0100)
>
> ----------------------------------------------------------------
> Migration pull 2018-07-10 (for 3.0)
>
> Migration fixes and migration test fixes, mostly
> around postcopy and postcopy recovery
>
Applied, thanks.

-- PMM

[Qemu-devel] [PULL 00/15] migration queue

[Dr. David Alan Gilbert (git)]

From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>

The following changes since commit a678502e4f7580a6f143f680404aaee57ac3f4b5:

  Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging (2017-01-24 15:39:09 +0000)

are available in the git repository at:

  git://github.com/dagrh/qemu.git tags/pull-migration-20170124b

for you to fetch changes up to 46a02a745176e1ef30de41706b5da4f1bc7fc495:

  migration/tracing: Add tracing on save (2017-01-24 18:00:32 +0000)

----------------------------------------------------------------
Migration

1 My maintainer change
2 Jianjun's qtailq
3 Ashijeet's only-migratable
4 Zhanghailiang's re-active images
5 Pankaj's change name of migration thread
6 My PCI migration merge
7 Juan's debug to tracing
8 My tracing on save

----------------------------------------------------------------
Ashijeet Acharya (5):
      block/vvfat: Remove the undesirable comment
      migration: Add a new option to enable only-migratable
      migration: Allow "device add" options to only add migratable devices
      migration: disallow migrate_add_blocker during migration
      migration: Fail migration blocker for --only-migratable

Dr. David Alan Gilbert (3):
      MAINTAINERS: Add myself as a migration submaintainer
      PCI/migration merge vmstate_pci_device and vmstate_pcie_device
      migration/tracing: Add tracing on save

Jianjun Duan (4):
      migration: extend VMStateInfo
      migration: migrate QTAILQ
      tests/migration: Add test for QTAILQ migration
      migration: add error_report

Juan Quintela (1):
      migration: transform remaining DPRINTF into trace_

Pankaj Gupta (1):
      migration: Change name of live migration thread

zhanghailiang (1):
      migration: re-active images while migration been canceled after inactive them

 MAINTAINERS                        |   1 +
 block/qcow.c                       |   8 +-
 block/vdi.c                        |   8 +-
 block/vhdx.c                       |  17 ++--
 block/vmdk.c                       |   9 +-
 block/vpc.c                        |  11 +-
 block/vvfat.c                      |  20 ++--
 hw/9pfs/9p.c                       |  33 ++++--
 hw/display/virtio-gpu.c            |  40 +++++---
 hw/intc/arm_gic_kvm.c              |  17 ++--
 hw/intc/arm_gicv3_its_kvm.c        |  20 ++--
 hw/intc/arm_gicv3_kvm.c            |  19 ++--
 hw/intc/s390_flic_kvm.c            |   8 +-
 hw/misc/ivshmem.c                  |  14 ++-
 hw/net/e1000e.c                    |   2 +-
 hw/net/vmxnet3.c                   |  26 +++--
 hw/nvram/eeprom93xx.c              |   8 +-
 hw/nvram/fw_cfg.c                  |   8 +-
 hw/pci-bridge/ioh3420.c            |   2 +-
 hw/pci-bridge/xio3130_downstream.c |   2 +-
 hw/pci-bridge/xio3130_upstream.c   |   2 +-
 hw/pci/msix.c                      |   8 +-
 hw/pci/pci.c                       |  57 ++++++-----
 hw/pci/shpc.c                      |   7 +-
 hw/scsi/megasas.c                  |   2 +-
 hw/scsi/scsi-bus.c                 |   8 +-
 hw/scsi/vhost-scsi.c               |  25 +++--
 hw/scsi/vmw_pvscsi.c               |   2 +-
 hw/timer/twl92230.c                |   8 +-
 hw/usb/bus.c                       |  19 ++++
 hw/usb/hcd-xhci.c                  |   2 +-
 hw/usb/redirect.c                  |  26 +++--
 hw/virtio/vhost.c                  |   8 +-
 hw/virtio/virtio-pci.c             |   8 +-
 hw/virtio/virtio.c                 |  15 ++-
 include/hw/pci/pcie.h              |  10 --
 include/migration/migration.h      |  13 ++-
 include/migration/vmstate.h        |  39 ++++++-
 include/qemu/queue.h               |  60 +++++++++++
 migration/migration.c              |  61 ++++++++++-
 migration/ram.c                    |  18 +---
 migration/savevm.c                 |   7 +-
 migration/trace-events             |  12 +++
 migration/vmstate.c                | 203 +++++++++++++++++++++++++++++--------
 qdev-monitor.c                     |   9 ++
 qemu-options.hx                    |   9 ++
 stubs/migr-blocker.c               |   3 +-
 target/alpha/machine.c             |   6 +-
 target/arm/machine.c               |  14 ++-
 target/i386/kvm.c                  |  16 ++-
 target/i386/machine.c              |  26 +++--
 target/mips/machine.c              |  14 ++-
 target/ppc/machine.c               |  12 ++-
 target/sparc/machine.c             |   6 +-
 tests/test-vmstate.c               | 147 +++++++++++++++++++++++++++
 vl.c                               |   4 +
 56 files changed, 910 insertions(+), 249 deletions(-)

Re: [Qemu-devel] [PULL 00/15] migration queue

[Peter Maydell]

On 24 January 2017 at 18:47, Dr. David Alan Gilbert (git)
<dgilbert@redhat.com> wrote:
> From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
>
> The following changes since commit a678502e4f7580a6f143f680404aaee57ac3f4b5:
>
>   Merge remote-tracking branch 'remotes/ehabkost/tags/x86-and-machine-pull-request' into staging (2017-01-24 15:39:09 +0000)
>
> are available in the git repository at:
>
>   git://github.com/dagrh/qemu.git tags/pull-migration-20170124b
>
> for you to fetch changes up to 46a02a745176e1ef30de41706b5da4f1bc7fc495:
>
>   migration/tracing: Add tracing on save (2017-01-24 18:00:32 +0000)
>
> ----------------------------------------------------------------
> Migration
>
> 1 My maintainer change
> 2 Jianjun's qtailq
> 3 Ashijeet's only-migratable
> 4 Zhanghailiang's re-active images
> 5 Pankaj's change name of migration thread
> 6 My PCI migration merge
> 7 Juan's debug to tracing
> 8 My tracing on save
>

Applied, thanks.

-- PMM