qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: Luiz Capitulino <lcapitulino@redhat.com>
To: Pankaj Gupta <pagupta@redhat.com>
Cc: linux-kernel@vger.kernel.org, kvm@vger.kernel.org,
	qemu-devel@nongnu.org, linux-nvdimm@ml01.01.org, jack@suse.cz,
	stefanha@redhat.com, dan.j.williams@intel.com, riel@surriel.com,
	haozhong.zhang@intel.com, nilal@redhat.com, kwolf@redhat.com,
	pbonzini@redhat.com, ross.zwisler@intel.com, david@redhat.com,
	xiaoguangrong.eric@gmail.com, hch@infradead.org, mst@redhat.com,
	niteshnarayanlal@hotmail.com, imammedo@redhat.com,
	eblake@redhat.com
Subject: Re: [Qemu-devel] [RFC v3 2/2] virtio-pmem: Add virtio pmem driver
Date: Fri, 13 Jul 2018 16:38:27 -0400	[thread overview]
Message-ID: <20180713163827.74e9fc91@doriath> (raw)
In-Reply-To: <20180713075232.9575-3-pagupta@redhat.com>

On Fri, 13 Jul 2018 13:22:31 +0530
Pankaj Gupta <pagupta@redhat.com> wrote:

> This patch adds virtio-pmem driver for KVM guest.
> 
> Guest reads the persistent memory range information from Qemu over 
> VIRTIO and registers it on nvdimm_bus. It also creates a nd_region 
> object with the persistent memory range information so that existing 
> 'nvdimm/pmem' driver can reserve this into system memory map. This way 
> 'virtio-pmem' driver uses existing functionality of pmem driver to 
> register persistent memory compatible for DAX capable filesystems.
> 
> This also provides function to perform guest flush over VIRTIO from 
> 'pmem' driver when userspace performs flush on DAX memory range.
> 
> Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
> ---
>  drivers/virtio/Kconfig           |   9 ++
>  drivers/virtio/Makefile          |   1 +
>  drivers/virtio/virtio_pmem.c     | 190 +++++++++++++++++++++++++++++++++++++++
>  include/linux/virtio_pmem.h      |  44 +++++++++
>  include/uapi/linux/virtio_ids.h  |   1 +
>  include/uapi/linux/virtio_pmem.h |  40 +++++++++
>  6 files changed, 285 insertions(+)
>  create mode 100644 drivers/virtio/virtio_pmem.c
>  create mode 100644 include/linux/virtio_pmem.h
>  create mode 100644 include/uapi/linux/virtio_pmem.h
> 
> diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig
> index 3589764..a331e23 100644
> --- a/drivers/virtio/Kconfig
> +++ b/drivers/virtio/Kconfig
> @@ -42,6 +42,15 @@ config VIRTIO_PCI_LEGACY
>  
>  	  If unsure, say Y.
>  
> +config VIRTIO_PMEM
> +	tristate "Support for virtio pmem driver"
> +	depends on VIRTIO
> +	help
> +	This driver provides support for virtio based flushing interface
> +	for persistent memory range.
> +
> +	If unsure, say M.
> +
>  config VIRTIO_BALLOON
>  	tristate "Virtio balloon driver"
>  	depends on VIRTIO
> diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
> index 3a2b5c5..cbe91c6 100644
> --- a/drivers/virtio/Makefile
> +++ b/drivers/virtio/Makefile
> @@ -6,3 +6,4 @@ virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o
>  virtio_pci-$(CONFIG_VIRTIO_PCI_LEGACY) += virtio_pci_legacy.o
>  obj-$(CONFIG_VIRTIO_BALLOON) += virtio_balloon.o
>  obj-$(CONFIG_VIRTIO_INPUT) += virtio_input.o
> +obj-$(CONFIG_VIRTIO_PMEM) += virtio_pmem.o
> diff --git a/drivers/virtio/virtio_pmem.c b/drivers/virtio/virtio_pmem.c
> new file mode 100644
> index 0000000..6200b5e
> --- /dev/null
> +++ b/drivers/virtio/virtio_pmem.c
> @@ -0,0 +1,190 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * virtio_pmem.c: Virtio pmem Driver
> + *
> + * Discovers persistent memory range information
> + * from host and provides a virtio based flushing
> + * interface.
> + */
> +#include <linux/virtio.h>
> +#include <linux/module.h>
> +#include <linux/virtio_pmem.h>
> +
> +static struct virtio_device_id id_table[] = {
> +	{ VIRTIO_ID_PMEM, VIRTIO_DEV_ANY_ID },
> +	{ 0 },
> +};
> +
> + /* The interrupt handler */
> +static void host_ack(struct virtqueue *vq)
> +{
> +	unsigned int len;
> +	unsigned long flags;
> +	struct virtio_pmem_request *req;
> +	struct virtio_pmem *vpmem = vq->vdev->priv;
> +
> +	spin_lock_irqsave(&vpmem->pmem_lock, flags);
> +	while ((req = virtqueue_get_buf(vq, &len)) != NULL) {
> +		req->done = true;
> +		wake_up(&req->acked);
> +	}
> +	spin_unlock_irqrestore(&vpmem->pmem_lock, flags);

Honest question: why do you need to disable interrupts here?

> +}
> + /* Initialize virt queue */
> +static int init_vq(struct virtio_pmem *vpmem)
> +{
> +	struct virtqueue *vq;
> +
> +	/* single vq */
> +	vpmem->req_vq = vq = virtio_find_single_vq(vpmem->vdev,
> +				host_ack, "flush_queue");
> +	if (IS_ERR(vq))
> +		return PTR_ERR(vq);
> +	spin_lock_init(&vpmem->pmem_lock);
> +
> +	return 0;
> +};
> +
> + /* The request submission function */
> +static int virtio_pmem_flush(struct device *dev)
> +{
> +	int err;
> +	unsigned long flags;
> +	struct scatterlist *sgs[2], sg, ret;
> +	struct virtio_device *vdev = dev_to_virtio(dev->parent->parent);
> +	struct virtio_pmem *vpmem = vdev->priv;
> +	struct virtio_pmem_request *req = kmalloc(sizeof(*req), GFP_KERNEL);

Not checking kmalloc() return.

> +
> +	req->done = false;
> +	init_waitqueue_head(&req->acked);
> +	spin_lock_irqsave(&vpmem->pmem_lock, flags);

Why do you need spin_lock_irqsave()? There are two points consider:

1. Will virtio_pmem_flush() ever be called with interrupts disabled?
   If yes, then it's broken since you should be using GFP_ATOMIC in the
   kmalloc() call and you can't call wait_event()

2. If virtio_pmem_flush() is never called with interrupts disabled, do
   you really need to disable interrupts? If yes, why?

Another point to consider is whether or not virtio_pmem_flush()
can be called from atomic context. nvdimm_flush() itself is called
from a few atomic sites, but I can't tell if virtio_pmem_flush()
will ever be called from those sites. If it can be called atomic
context, then item 1 applies here. If you're sure it can't, then
you should probably call might_sleep().

> +
> +	sg_init_one(&sg, req, sizeof(req));
> +	sgs[0] = &sg;
> +	sg_init_one(&ret, &req->ret, sizeof(req->ret));
> +	sgs[1] = &ret;
> +	err = virtqueue_add_sgs(vpmem->req_vq, sgs, 1, 1, req, GFP_ATOMIC);
> +	if (err) {
> +		dev_err(&vdev->dev, "failed to send command to virtio pmem device\n");
> +		spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
> +		return -ENOSPC;
> +	}
> +	virtqueue_kick(vpmem->req_vq);
> +	spin_unlock_irqrestore(&vpmem->pmem_lock, flags);
> +
> +	/* When host has read buffer, this completes via host_ack */
> +	wait_event(req->acked, req->done);
> +	err = req->ret;
> +	kfree(req);
> +
> +	return err;
> +};
> +
> +static int virtio_pmem_probe(struct virtio_device *vdev)
> +{
> +	int err = 0;
> +	struct resource res;
> +	struct virtio_pmem *vpmem;
> +	struct nvdimm_bus *nvdimm_bus;
> +	struct nd_region_desc ndr_desc;
> +	int nid = dev_to_node(&vdev->dev);
> +	struct nd_region *nd_region;
> +
> +	if (!vdev->config->get) {
> +		dev_err(&vdev->dev, "%s failure: config disabled\n",
> +			__func__);
> +		return -EINVAL;
> +	}
> +
> +	vdev->priv = vpmem = devm_kzalloc(&vdev->dev, sizeof(*vpmem),
> +			GFP_KERNEL);
> +	if (!vpmem) {
> +		err = -ENOMEM;
> +		goto out_err;
> +	}
> +
> +	vpmem->vdev = vdev;
> +	err = init_vq(vpmem);
> +	if (err)
> +		goto out_err;
> +
> +	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
> +			start, &vpmem->start);
> +	virtio_cread(vpmem->vdev, struct virtio_pmem_config,
> +			size, &vpmem->size);
> +
> +	res.start = vpmem->start;
> +	res.end   = vpmem->start + vpmem->size-1;
> +	vpmem->nd_desc.provider_name = "virtio-pmem";
> +	vpmem->nd_desc.module = THIS_MODULE;
> +
> +	vpmem->nvdimm_bus = nvdimm_bus = nvdimm_bus_register(&vdev->dev,
> +						&vpmem->nd_desc);
> +	if (!nvdimm_bus)
> +		goto out_vq;
> +
> +	dev_set_drvdata(&vdev->dev, nvdimm_bus);
> +	memset(&ndr_desc, 0, sizeof(ndr_desc));
> +
> +	ndr_desc.res = &res;
> +	ndr_desc.numa_node = nid;
> +	ndr_desc.flush = virtio_pmem_flush;
> +	set_bit(ND_REGION_PAGEMAP, &ndr_desc.flags);
> +	nd_region = nvdimm_pmem_region_create(nvdimm_bus, &ndr_desc);
> +
> +	if (!nd_region)
> +		goto out_nd;
> +
> +	virtio_device_ready(vdev);
> +	return 0;
> +out_nd:
> +	err = -ENXIO;
> +	nvdimm_bus_unregister(nvdimm_bus);
> +out_vq:
> +	vdev->config->del_vqs(vdev);
> +out_err:
> +	dev_err(&vdev->dev, "failed to register virtio pmem memory\n");
> +	return err;
> +}
> +
> +static void virtio_pmem_remove(struct virtio_device *vdev)
> +{
> +	struct virtio_pmem *vpmem = vdev->priv;
> +	struct nvdimm_bus *nvdimm_bus = dev_get_drvdata(&vdev->dev);
> +
> +	nvdimm_bus_unregister(nvdimm_bus);
> +	vdev->config->del_vqs(vdev);
> +	kfree(vpmem);
> +}
> +
> +#ifdef CONFIG_PM_SLEEP
> +static int virtio_pmem_freeze(struct virtio_device *vdev)
> +{
> +	/* todo: handle freeze function */
> +	return -EPERM;
> +}
> +
> +static int virtio_pmem_restore(struct virtio_device *vdev)
> +{
> +	/* todo: handle restore function */
> +	return -EPERM;
> +}
> +#endif
> +
> +
> +static struct virtio_driver virtio_pmem_driver = {
> +	.driver.name		= KBUILD_MODNAME,
> +	.driver.owner		= THIS_MODULE,
> +	.id_table		= id_table,
> +	.probe			= virtio_pmem_probe,
> +	.remove			= virtio_pmem_remove,
> +#ifdef CONFIG_PM_SLEEP
> +	.freeze                 = virtio_pmem_freeze,
> +	.restore                = virtio_pmem_restore,
> +#endif
> +};
> +
> +module_virtio_driver(virtio_pmem_driver);
> +MODULE_DEVICE_TABLE(virtio, id_table);
> +MODULE_DESCRIPTION("Virtio pmem driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/virtio_pmem.h b/include/linux/virtio_pmem.h
> new file mode 100644
> index 0000000..0f83d9c
> --- /dev/null
> +++ b/include/linux/virtio_pmem.h
> @@ -0,0 +1,44 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * virtio_pmem.h: virtio pmem Driver
> + *
> + * Discovers persistent memory range information
> + * from host and provides a virtio based flushing
> + * interface.
> + */
> +#ifndef _LINUX_VIRTIO_PMEM_H
> +#define _LINUX_VIRTIO_PMEM_H
> +
> +#include <linux/virtio_ids.h>
> +#include <linux/virtio_config.h>
> +#include <uapi/linux/virtio_pmem.h>
> +#include <linux/libnvdimm.h>
> +#include <linux/spinlock.h>
> +
> +struct virtio_pmem_request {
> +	/* Host return status corresponding to flush request */
> +	int ret;
> +
> +	/* Wait queue to process deferred work after ack from host */
> +	wait_queue_head_t acked;
> +	bool done;
> +};
> +
> +struct virtio_pmem {
> +	struct virtio_device *vdev;
> +
> +	/* Virtio pmem request queue */
> +	struct virtqueue *req_vq;
> +
> +	/* nvdimm bus registers virtio pmem device */
> +	struct nvdimm_bus *nvdimm_bus;
> +	struct nvdimm_bus_descriptor nd_desc;
> +
> +	/* Synchronize virtqueue data */
> +	spinlock_t pmem_lock;
> +
> +	/* Memory region information */
> +	uint64_t start;
> +	uint64_t size;
> +};
> +#endif
> diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h
> index 6d5c3b2..3463895 100644
> --- a/include/uapi/linux/virtio_ids.h
> +++ b/include/uapi/linux/virtio_ids.h
> @@ -43,5 +43,6 @@
>  #define VIRTIO_ID_INPUT        18 /* virtio input */
>  #define VIRTIO_ID_VSOCK        19 /* virtio vsock transport */
>  #define VIRTIO_ID_CRYPTO       20 /* virtio crypto */
> +#define VIRTIO_ID_PMEM         25 /* virtio pmem */
>  
>  #endif /* _LINUX_VIRTIO_IDS_H */
> diff --git a/include/uapi/linux/virtio_pmem.h b/include/uapi/linux/virtio_pmem.h
> new file mode 100644
> index 0000000..c7c22a5
> --- /dev/null
> +++ b/include/uapi/linux/virtio_pmem.h
> @@ -0,0 +1,40 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * This header, excluding the #ifdef __KERNEL__ part, is BSD licensed so
> + * anyone can use the definitions to implement compatible drivers/servers:
> + *
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + * 1. Redistributions of source code must retain the above copyright
> + *    notice, this list of conditions and the following disclaimer.
> + * 2. Redistributions in binary form must reproduce the above copyright
> + *    notice, this list of conditions and the following disclaimer in the
> + *    documentation and/or other materials provided with the distribution.
> + * 3. Neither the name of IBM nor the names of its contributors
> + *    may be used to endorse or promote products derived from this software
> + *    without specific prior written permission.
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
> + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
> + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
> + * ARE DISCLAIMED.  IN NO EVENT SHALL IBM OR CONTRIBUTORS BE LIABLE
> + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
> + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
> + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
> + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
> + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
> + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
> + * SUCH DAMAGE.
> + *
> + * Copyright (C) Red Hat, Inc., 2018-2019
> + * Copyright (C) Pankaj Gupta <pagupta@redhat.com>, 2018
> + */
> +#ifndef _UAPI_LINUX_VIRTIO_PMEM_H
> +#define _UAPI_LINUX_VIRTIO_PMEM_H
> +
> +struct virtio_pmem_config {
> +	__le64 start;
> +	__le64 size;
> +};
> +#endif

  reply	other threads:[~2018-07-13 20:51 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-13  7:52 [Qemu-devel] [RFC v3 0/2] kvm "fake DAX" device flushing Pankaj Gupta
2018-07-13  7:52 ` [Qemu-devel] [RFC v3 1/2] libnvdimm: Add flush callback for virtio pmem Pankaj Gupta
2018-07-13 20:35   ` Luiz Capitulino
2018-07-16  8:13     ` Pankaj Gupta
2018-07-13  7:52 ` [Qemu-devel] [RFC v3 2/2] virtio-pmem: Add virtio pmem driver Pankaj Gupta
2018-07-13 20:38   ` Luiz Capitulino [this message]
2018-07-16 11:46     ` Pankaj Gupta
2018-07-16 14:03       ` Luiz Capitulino
2018-07-16 15:11         ` Pankaj Gupta
2018-07-17 13:11   ` Stefan Hajnoczi
2018-07-18  7:05     ` Pankaj Gupta
2018-07-13  7:52 ` [Qemu-devel] [RFC v3] qemu: Add virtio pmem device Pankaj Gupta
2018-07-18 12:55   ` Luiz Capitulino
2018-07-19  5:48     ` Pankaj Gupta
2018-07-19 12:16       ` Stefan Hajnoczi
2018-07-19 12:48         ` Luiz Capitulino
2018-07-19 12:57           ` Luiz Capitulino
2018-07-20 13:04           ` Pankaj Gupta
2018-07-19 13:58         ` David Hildenbrand
2018-07-19 15:48           ` Luiz Capitulino
2018-07-20 13:02           ` Pankaj Gupta
2018-07-19 12:39       ` Luiz Capitulino
2018-07-24 16:13   ` Eric Blake
2018-07-25  5:01     ` Pankaj Gupta
2018-07-25 12:19       ` Eric Blake
2018-07-25 12:47         ` Pankaj Gupta
2018-08-28 12:13 ` [Qemu-devel] [RFC v3 0/2] kvm "fake DAX" device flushing David Hildenbrand
2018-08-28 12:39   ` Pankaj Gupta

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180713163827.74e9fc91@doriath \
    --to=lcapitulino@redhat.com \
    --cc=dan.j.williams@intel.com \
    --cc=david@redhat.com \
    --cc=eblake@redhat.com \
    --cc=haozhong.zhang@intel.com \
    --cc=hch@infradead.org \
    --cc=imammedo@redhat.com \
    --cc=jack@suse.cz \
    --cc=kvm@vger.kernel.org \
    --cc=kwolf@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-nvdimm@ml01.01.org \
    --cc=mst@redhat.com \
    --cc=nilal@redhat.com \
    --cc=niteshnarayanlal@hotmail.com \
    --cc=pagupta@redhat.com \
    --cc=pbonzini@redhat.com \
    --cc=qemu-devel@nongnu.org \
    --cc=riel@surriel.com \
    --cc=ross.zwisler@intel.com \
    --cc=stefanha@redhat.com \
    --cc=xiaoguangrong.eric@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).