From: Igor Mammedov <imammedo@redhat.com>
To: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: qemu-devel@nongnu.org, Eduardo Habkost <ehabkost@redhat.com>,
"Michael S. Tsirkin" <mst@redhat.com>,
stefanb@linux.vnet.ibm.com, Paolo Bonzini <pbonzini@redhat.com>,
Richard Henderson <rth@twiddle.net>
Subject: Re: [Qemu-devel] [PATCH v8 2/5] tpm: implement virtual memory device for TPM PPI
Date: Tue, 17 Jul 2018 16:46:38 +0200 [thread overview]
Message-ID: <20180717164638.1e99045a@redhat.com> (raw)
In-Reply-To: <20180716125948.11666-3-marcandre.lureau@redhat.com>
On Mon, 16 Jul 2018 14:59:45 +0200
Marc-André Lureau <marcandre.lureau@redhat.com> wrote:
> From: Stefan Berger <stefanb@linux.vnet.ibm.com>
>
> Implement a virtual memory device for the TPM Physical Presence interface.
> The memory is located at 0xFED45000 and used by ACPI to send messages to the
> firmware (BIOS) and by the firmware to provide parameters for each one of
> the supported codes.
>
> This device should be used by all TPM interfaces on x86 and can be added
> by calling tpm_ppi_init_io().
>
> Note: bios_linker cannot be used to allocate the PPI memory region,
> since the reserved memory should stay stable across reboots, and might
> be needed before the ACPI tables are installed.
>
> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
with commit message fixed as suggested earlier
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
> ---
> hw/tpm/tpm_ppi.h | 26 ++++++++++++++++++++++++++
> include/hw/acpi/tpm.h | 6 ++++++
> hw/tpm/tpm_crb.c | 8 ++++++++
> hw/tpm/tpm_ppi.c | 31 +++++++++++++++++++++++++++++++
> hw/tpm/tpm_tis.c | 8 ++++++++
> hw/tpm/Makefile.objs | 1 +
> 6 files changed, 80 insertions(+)
> create mode 100644 hw/tpm/tpm_ppi.h
> create mode 100644 hw/tpm/tpm_ppi.c
>
> diff --git a/hw/tpm/tpm_ppi.h b/hw/tpm/tpm_ppi.h
> new file mode 100644
> index 0000000000..f6458bf87e
> --- /dev/null
> +++ b/hw/tpm/tpm_ppi.h
> @@ -0,0 +1,26 @@
> +/*
> + * TPM Physical Presence Interface
> + *
> + * Copyright (C) 2018 IBM Corporation
> + *
> + * Authors:
> + * Stefan Berger <stefanb@us.ibm.com>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + */
> +#ifndef TPM_TPM_PPI_H
> +#define TPM_TPM_PPI_H
> +
> +#include "hw/acpi/tpm.h"
> +#include "exec/address-spaces.h"
> +
> +typedef struct TPMPPI {
> + MemoryRegion ram;
> + uint8_t buf[TPM_PPI_ADDR_SIZE];
> +} TPMPPI;
> +
> +bool tpm_ppi_init(TPMPPI *tpmppi, struct MemoryRegion *m,
> + hwaddr addr, Object *obj, Error **errp);
> +
> +#endif /* TPM_TPM_PPI_H */
> diff --git a/include/hw/acpi/tpm.h b/include/hw/acpi/tpm.h
> index 3580ffd50c..b8796df916 100644
> --- a/include/hw/acpi/tpm.h
> +++ b/include/hw/acpi/tpm.h
> @@ -188,4 +188,10 @@ REG32(CRB_DATA_BUFFER, 0x80)
> #define TPM2_START_METHOD_MMIO 6
> #define TPM2_START_METHOD_CRB 7
>
> +/*
> + * Physical Presence Interface
> + */
> +#define TPM_PPI_ADDR_SIZE 0x400
> +#define TPM_PPI_ADDR_BASE 0xFED45000
> +
> #endif /* HW_ACPI_TPM_H */
> diff --git a/hw/tpm/tpm_crb.c b/hw/tpm/tpm_crb.c
> index d5b0ac5920..b243222fd6 100644
> --- a/hw/tpm/tpm_crb.c
> +++ b/hw/tpm/tpm_crb.c
> @@ -29,6 +29,7 @@
> #include "sysemu/reset.h"
> #include "tpm_int.h"
> #include "tpm_util.h"
> +#include "tpm_ppi.h"
> #include "trace.h"
>
> typedef struct CRBState {
> @@ -43,6 +44,7 @@ typedef struct CRBState {
> size_t be_buffer_size;
>
> bool ppi_enabled;
> + TPMPPI ppi;
> } CRBState;
>
> #define CRB(obj) OBJECT_CHECK(CRBState, (obj), TYPE_TPM_CRB)
> @@ -294,6 +296,12 @@ static void tpm_crb_realize(DeviceState *dev, Error **errp)
> memory_region_add_subregion(get_system_memory(),
> TPM_CRB_ADDR_BASE + sizeof(s->regs), &s->cmdmem);
>
> + if (s->ppi_enabled &&
> + !tpm_ppi_init(&s->ppi, get_system_memory(),
> + TPM_PPI_ADDR_BASE, OBJECT(s), errp)) {
> + return;
> + }
> +
> qemu_register_reset(tpm_crb_reset, dev);
> }
>
> diff --git a/hw/tpm/tpm_ppi.c b/hw/tpm/tpm_ppi.c
> new file mode 100644
> index 0000000000..8b46b9dd4b
> --- /dev/null
> +++ b/hw/tpm/tpm_ppi.c
> @@ -0,0 +1,31 @@
> +/*
> + * tpm_ppi.c - TPM Physical Presence Interface
> + *
> + * Copyright (C) 2018 IBM Corporation
> + *
> + * Authors:
> + * Stefan Berger <stefanb@us.ibm.com>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
> + * See the COPYING file in the top-level directory.
> + *
> + */
> +
> +#include "qemu/osdep.h"
> +
> +#include "qapi/error.h"
> +#include "cpu.h"
> +#include "sysemu/memory_mapping.h"
> +#include "migration/vmstate.h"
> +#include "tpm_ppi.h"
> +
> +bool tpm_ppi_init(TPMPPI *tpmppi, struct MemoryRegion *m,
> + hwaddr addr, Object *obj, Error **errp)
> +{
> + memory_region_init_ram_device_ptr(&tpmppi->ram, obj, "tpm-ppi",
> + TPM_PPI_ADDR_SIZE, tpmppi->buf);
> + vmstate_register_ram(&tpmppi->ram, DEVICE(obj));
> +
> + memory_region_add_subregion(m, addr, &tpmppi->ram);
> + return true;
> +}
> diff --git a/hw/tpm/tpm_tis.c b/hw/tpm/tpm_tis.c
> index d9ddf9b723..70432ffe8b 100644
> --- a/hw/tpm/tpm_tis.c
> +++ b/hw/tpm/tpm_tis.c
> @@ -31,6 +31,7 @@
> #include "sysemu/tpm_backend.h"
> #include "tpm_int.h"
> #include "tpm_util.h"
> +#include "tpm_ppi.h"
> #include "trace.h"
>
> #define TPM_TIS_NUM_LOCALITIES 5 /* per spec */
> @@ -83,6 +84,7 @@ typedef struct TPMState {
> size_t be_buffer_size;
>
> bool ppi_enabled;
> + TPMPPI ppi;
> } TPMState;
>
> #define TPM(obj) OBJECT_CHECK(TPMState, (obj), TYPE_TPM_TIS)
> @@ -979,6 +981,12 @@ static void tpm_tis_realizefn(DeviceState *dev, Error **errp)
>
> memory_region_add_subregion(isa_address_space(ISA_DEVICE(dev)),
> TPM_TIS_ADDR_BASE, &s->mmio);
> +
> + if (s->ppi_enabled &&
> + !tpm_ppi_init(&s->ppi, isa_address_space(ISA_DEVICE(dev)),
> + TPM_PPI_ADDR_BASE, OBJECT(s), errp)) {
> + return;
> + }
> }
>
> static void tpm_tis_initfn(Object *obj)
> diff --git a/hw/tpm/Makefile.objs b/hw/tpm/Makefile.objs
> index 1dc9f8bf2c..700c878622 100644
> --- a/hw/tpm/Makefile.objs
> +++ b/hw/tpm/Makefile.objs
> @@ -1,4 +1,5 @@
> common-obj-y += tpm_util.o
> +obj-y += tpm_ppi.o
> common-obj-$(CONFIG_TPM_TIS) += tpm_tis.o
> common-obj-$(CONFIG_TPM_CRB) += tpm_crb.o
> common-obj-$(CONFIG_TPM_PASSTHROUGH) += tpm_passthrough.o
next prev parent reply other threads:[~2018-07-17 14:46 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-07-16 12:59 [Qemu-devel] [PATCH v8 0/5] Add support for TPM Physical Presence interface Marc-André Lureau
2018-07-16 12:59 ` [Qemu-devel] [PATCH v8 1/5] tpm: add a "ppi" boolean property Marc-André Lureau
2018-07-16 12:59 ` [Qemu-devel] [PATCH v8 2/5] tpm: implement virtual memory device for TPM PPI Marc-André Lureau
2018-07-16 14:44 ` Igor Mammedov
2018-07-16 14:56 ` Marc-André Lureau
2018-07-17 7:59 ` Igor Mammedov
2018-07-17 10:22 ` Marc-André Lureau
2018-07-17 14:34 ` Igor Mammedov
2018-07-17 10:03 ` Igor Mammedov
2018-07-17 10:39 ` Marc-André Lureau
2018-07-17 13:04 ` Laszlo Ersek
2018-07-17 14:36 ` Igor Mammedov
2018-07-17 14:46 ` Igor Mammedov [this message]
2018-07-16 12:59 ` [Qemu-devel] [PATCH v8 3/5] acpi: add fw_cfg file for TPM and PPI virtual memory device Marc-André Lureau
2018-07-16 14:46 ` Igor Mammedov
2018-07-18 8:16 ` Igor Mammedov
2018-07-16 12:59 ` [Qemu-devel] [PATCH v8 4/5] acpi: build TPM Physical Presence interface Marc-André Lureau
2018-07-17 12:16 ` Igor Mammedov
2018-07-16 12:59 ` [Qemu-devel] [PATCH v8 5/5] PoC: tpm: add ACPI memory clear interface Marc-André Lureau
2018-07-17 7:57 ` Igor Mammedov
2018-07-17 15:39 ` Marc-André Lureau
2018-07-23 11:08 ` Igor Mammedov
2018-07-23 11:16 ` Marc-André Lureau
2018-07-16 16:41 ` [Qemu-devel] [PATCH v8 0/5] Add support for TPM Physical Presence interface Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180717164638.1e99045a@redhat.com \
--to=imammedo@redhat.com \
--cc=ehabkost@redhat.com \
--cc=marcandre.lureau@redhat.com \
--cc=mst@redhat.com \
--cc=pbonzini@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=rth@twiddle.net \
--cc=stefanb@linux.vnet.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).