* [Qemu-devel] [PULL 0/7] Block layer patches
@ 2018-07-23 16:45 Kevin Wolf
2018-07-23 16:45 ` [Qemu-devel] [PULL 1/7] qemu-iotests: Use host_device instead of file in 149 Kevin Wolf
` (7 more replies)
0 siblings, 8 replies; 9+ messages in thread
From: Kevin Wolf @ 2018-07-23 16:45 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel, peter.maydell
The following changes since commit 55b1f14cefcb19ce6d5e28c4c83404230888aa7e:
Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.0-pull-request' into staging (2018-07-23 14:03:14 +0100)
are available in the git repository at:
git://repo.or.cz/qemu/kevin.git tags/for-upstream
for you to fetch changes up to 3e31b4e17064d22e533071aaa57d3f01499ef910:
block/vvfat: Disable debug message by default (2018-07-23 16:50:43 +0200)
----------------------------------------------------------------
Block layer patches:
- vvfat: Disable debug message by default
- qemu-iotests fixes
- Fix typos in comments
----------------------------------------------------------------
John Snow (1):
iotests: remove LUKS support from test 226
Kevin Wolf (1):
qemu-iotests: Use host_device instead of file in 149
Max Reitz (2):
iotest: Fix filtering order in 226
iotests: Disallow compat=0.10 in 223
Peter Lieven (1):
qemu-img: avoid overflow of min_sparse parameter
Stefan Weil (1):
block: Fix typos in comments (found by codespell)
Thomas Huth (1):
block/vvfat: Disable debug message by default
block.c | 2 +-
block/backup.c | 4 +-
block/curl.c | 2 +-
block/gluster.c | 2 +-
block/vhdx.c | 2 +-
block/vvfat.c | 4 +-
qemu-img.c | 16 ++-
tests/qemu-iotests/149 | 2 +-
tests/qemu-iotests/149.out | 344 ++++++++++++++++++++++-----------------------
tests/qemu-iotests/223 | 2 +
tests/qemu-iotests/226 | 7 +-
11 files changed, 199 insertions(+), 188 deletions(-)
^ permalink raw reply [flat|nested] 9+ messages in thread
* [Qemu-devel] [PULL 1/7] qemu-iotests: Use host_device instead of file in 149
2018-07-23 16:45 [Qemu-devel] [PULL 0/7] Block layer patches Kevin Wolf
@ 2018-07-23 16:45 ` Kevin Wolf
2018-07-23 16:45 ` [Qemu-devel] [PULL 2/7] block: Fix typos in comments (found by codespell) Kevin Wolf
` (6 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Kevin Wolf @ 2018-07-23 16:45 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel, peter.maydell
The test case uses block devices with driver=file, which causes the test
to fail after commit 230ff73904 added a deprecation warning for this.
Fix the test case to use driver=host_device and update the reference
output accordingly.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
tests/qemu-iotests/149 | 2 +-
tests/qemu-iotests/149.out | 344 ++++++++++++++++++++++-----------------------
2 files changed, 173 insertions(+), 173 deletions(-)
diff --git a/tests/qemu-iotests/149 b/tests/qemu-iotests/149
index d3ffa259db..9e0cad76f9 100755
--- a/tests/qemu-iotests/149
+++ b/tests/qemu-iotests/149
@@ -259,7 +259,7 @@ def qemu_io_image_args(config, dev=False):
if dev:
return [
"--image-opts",
- "driver=file,filename=%s" % config.device_path()]
+ "driver=host_device,filename=%s" % config.device_path()]
else:
return [
"--object",
diff --git a/tests/qemu-iotests/149.out b/tests/qemu-iotests/149.out
index 5dea00bfa8..1407ce6dad 100644
--- a/tests/qemu-iotests/149.out
+++ b/tests/qemu-iotests/149.out
@@ -7,13 +7,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512 --hash
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img qiotest-145-aes-256-xts-plain64-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -43,13 +43,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img qiotest-145-aes-256-xts-plain64-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -67,13 +67,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-plain64-sha1.img', fmt=luks size=439804651
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img qiotest-145-aes-256-xts-plain64-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -103,13 +103,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha1.img qiotest-145-aes-256-xts-plain64-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -127,13 +127,13 @@ sudo cryptsetup -q -v luksFormat --cipher twofish-xts-plain64 --key-size 512 --h
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img qiotest-145-twofish-256-xts-plain64-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -163,13 +163,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img qiotest-145-twofish-256-xts-plain64-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -187,13 +187,13 @@ Formatting 'TEST_DIR/luks-twofish-256-xts-plain64-sha1.img', fmt=luks size=43980
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img qiotest-145-twofish-256-xts-plain64-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -223,13 +223,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-256-xts-plain64-sha1.img qiotest-145-twofish-256-xts-plain64-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -247,13 +247,13 @@ sudo cryptsetup -q -v luksFormat --cipher serpent-xts-plain64 --key-size 512 --h
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img qiotest-145-serpent-256-xts-plain64-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -283,13 +283,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img qiotest-145-serpent-256-xts-plain64-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -307,13 +307,13 @@ Formatting 'TEST_DIR/luks-serpent-256-xts-plain64-sha1.img', fmt=luks size=43980
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img qiotest-145-serpent-256-xts-plain64-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -343,13 +343,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-256-xts-plain64-sha1.img qiotest-145-serpent-256-xts-plain64-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-256-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -367,13 +367,13 @@ sudo cryptsetup -q -v luksFormat --cipher cast5-cbc-plain64 --key-size 128 --has
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img qiotest-145-cast5-128-cbc-plain64-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -403,13 +403,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img qiotest-145-cast5-128-cbc-plain64-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -427,13 +427,13 @@ Formatting 'TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img', fmt=luks size=4398046
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img qiotest-145-cast5-128-cbc-plain64-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -463,13 +463,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-cast5-128-cbc-plain64-sha1.img qiotest-145-cast5-128-cbc-plain64-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-cast5-128-cbc-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -488,13 +488,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-cbc-plain --key-size 256 --hash sh
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img qiotest-145-aes-256-cbc-plain-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -524,13 +524,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img qiotest-145-aes-256-cbc-plain-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -548,13 +548,13 @@ Formatting 'TEST_DIR/luks-aes-256-cbc-plain-sha1.img', fmt=luks size=43980465111
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img qiotest-145-aes-256-cbc-plain-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -584,13 +584,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain-sha1.img qiotest-145-aes-256-cbc-plain-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -608,13 +608,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-cbc-plain64 --key-size 256 --hash
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img qiotest-145-aes-256-cbc-plain64-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -644,13 +644,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img qiotest-145-aes-256-cbc-plain64-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -668,13 +668,13 @@ Formatting 'TEST_DIR/luks-aes-256-cbc-plain64-sha1.img', fmt=luks size=439804651
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img qiotest-145-aes-256-cbc-plain64-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -704,13 +704,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha1.img qiotest-145-aes-256-cbc-plain64-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -728,13 +728,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-cbc-essiv:sha256 --key-size 256 --
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img qiotest-145-aes-256-cbc-essiv-sha256-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -764,13 +764,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img qiotest-145-aes-256-cbc-essiv-sha256-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -788,13 +788,13 @@ Formatting 'TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img', fmt=luks size=4398
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img qiotest-145-aes-256-cbc-essiv-sha256-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -824,13 +824,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-sha256-sha1.img qiotest-145-aes-256-cbc-essiv-sha256-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-sha256-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -848,13 +848,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-essiv:sha256 --key-size 512 --
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img qiotest-145-aes-256-xts-essiv-sha256-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -884,13 +884,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img qiotest-145-aes-256-xts-essiv-sha256-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -908,13 +908,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img', fmt=luks size=4398
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img qiotest-145-aes-256-xts-essiv-sha256-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -944,13 +944,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-essiv-sha256-sha1.img qiotest-145-aes-256-xts-essiv-sha256-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-essiv-sha256-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -968,13 +968,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 256 --hash
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img qiotest-145-aes-128-xts-plain64-sha256-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1004,13 +1004,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img qiotest-145-aes-128-xts-plain64-sha256-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1028,13 +1028,13 @@ Formatting 'TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img', fmt=luks size=43
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img qiotest-145-aes-128-xts-plain64-sha256-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1064,13 +1064,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-128-xts-plain64-sha256-sha1.img qiotest-145-aes-128-xts-plain64-sha256-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-128-xts-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1088,13 +1088,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 384 --hash
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img qiotest-145-aes-192-xts-plain64-sha256-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1124,13 +1124,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img qiotest-145-aes-192-xts-plain64-sha256-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1148,13 +1148,13 @@ Formatting 'TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img', fmt=luks size=43
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img qiotest-145-aes-192-xts-plain64-sha256-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1184,13 +1184,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-192-xts-plain64-sha256-sha1.img qiotest-145-aes-192-xts-plain64-sha256-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-192-xts-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1208,13 +1208,13 @@ sudo cryptsetup -q -v luksFormat --cipher twofish-xts-plain64 --key-size 256 --h
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img qiotest-145-twofish-128-xts-plain64-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1244,13 +1244,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img qiotest-145-twofish-128-xts-plain64-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1268,13 +1268,13 @@ Formatting 'TEST_DIR/luks-twofish-128-xts-plain64-sha1.img', fmt=luks size=43980
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img qiotest-145-twofish-128-xts-plain64-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1304,13 +1304,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-twofish-128-xts-plain64-sha1.img qiotest-145-twofish-128-xts-plain64-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-twofish-128-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1329,13 +1329,13 @@ sudo cryptsetup -q -v luksFormat --cipher serpent-xts-plain64 --key-size 256 --h
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img qiotest-145-serpent-128-xts-plain64-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1365,13 +1365,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img qiotest-145-serpent-128-xts-plain64-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1389,13 +1389,13 @@ Formatting 'TEST_DIR/luks-serpent-128-xts-plain64-sha1.img', fmt=luks size=43980
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img qiotest-145-serpent-128-xts-plain64-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1425,13 +1425,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-128-xts-plain64-sha1.img qiotest-145-serpent-128-xts-plain64-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-128-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1449,13 +1449,13 @@ sudo cryptsetup -q -v luksFormat --cipher serpent-xts-plain64 --key-size 384 --h
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img qiotest-145-serpent-192-xts-plain64-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1485,13 +1485,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img qiotest-145-serpent-192-xts-plain64-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1509,13 +1509,13 @@ Formatting 'TEST_DIR/luks-serpent-192-xts-plain64-sha1.img', fmt=luks size=43980
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img qiotest-145-serpent-192-xts-plain64-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1545,13 +1545,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-serpent-192-xts-plain64-sha1.img qiotest-145-serpent-192-xts-plain64-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-serpent-192-xts-plain64-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1571,13 +1571,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512 --hash
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha224.img qiotest-145-aes-256-xts-plain64-sha224
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1607,13 +1607,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha224.img qiotest-145-aes-256-xts-plain64-sha224
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1631,13 +1631,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-plain64-sha224.img', fmt=luks size=4398046
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha224.img qiotest-145-aes-256-xts-plain64-sha224
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1667,13 +1667,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha224.img qiotest-145-aes-256-xts-plain64-sha224
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha224
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1691,13 +1691,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512 --hash
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img qiotest-145-aes-256-xts-plain64-sha256
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1727,13 +1727,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img qiotest-145-aes-256-xts-plain64-sha256
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1751,13 +1751,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-plain64-sha256.img', fmt=luks size=4398046
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img qiotest-145-aes-256-xts-plain64-sha256
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1787,13 +1787,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha256.img qiotest-145-aes-256-xts-plain64-sha256
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha256
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1811,13 +1811,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512 --hash
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha384.img qiotest-145-aes-256-xts-plain64-sha384
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1847,13 +1847,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha384.img qiotest-145-aes-256-xts-plain64-sha384
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1871,13 +1871,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-plain64-sha384.img', fmt=luks size=4398046
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha384.img qiotest-145-aes-256-xts-plain64-sha384
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1907,13 +1907,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha384.img qiotest-145-aes-256-xts-plain64-sha384
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha384
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1931,13 +1931,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512 --hash
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha512.img qiotest-145-aes-256-xts-plain64-sha512
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1967,13 +1967,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha512.img qiotest-145-aes-256-xts-plain64-sha512
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -1991,13 +1991,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-plain64-sha512.img', fmt=luks size=4398046
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha512.img qiotest-145-aes-256-xts-plain64-sha512
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2027,13 +2027,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-sha512.img qiotest-145-aes-256-xts-plain64-sha512
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-sha512
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2051,13 +2051,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain64 --key-size 512 --hash
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-ripemd160.img qiotest-145-aes-256-xts-plain64-ripemd160
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2087,13 +2087,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-ripemd160.img qiotest-145-aes-256-xts-plain64-ripemd160
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2111,13 +2111,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-plain64-ripemd160.img', fmt=luks size=4398
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-ripemd160.img qiotest-145-aes-256-xts-plain64-ripemd160
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2147,13 +2147,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain64-ripemd160.img qiotest-145-aes-256-xts-plain64-ripemd160
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain64-ripemd160
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2171,13 +2171,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-xts-plain --key-size 512 --hash sh
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img qiotest-145-aes-256-xts-plain-sha1-pwslot3
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2207,13 +2207,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwslot3.img qiotest-145-aes-256-xts-plain-sha1-pwslot3
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwslot3
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2245,13 +2245,13 @@ sudo cryptsetup -q -v luksAddKey TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img qiotest-145-aes-256-xts-plain-sha1-pwallslots
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2281,13 +2281,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img qiotest-145-aes-256-xts-plain-sha1-pwallslots
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2305,13 +2305,13 @@ Formatting 'TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img', fmt=luks size=
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img qiotest-145-aes-256-xts-plain-sha1-pwallslots
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2341,13 +2341,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-xts-plain-sha1-pwallslots.img qiotest-145-aes-256-xts-plain-sha1-pwallslots
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-xts-plain-sha1-pwallslots
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2365,13 +2365,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-cbc-essiv:sha256 --key-size 256 --
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img qiotest-145-aes-256-cbc-essiv-auto-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2401,13 +2401,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img qiotest-145-aes-256-cbc-essiv-auto-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2425,13 +2425,13 @@ Formatting 'TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img', fmt=luks size=439804
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img qiotest-145-aes-256-cbc-essiv-auto-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2461,13 +2461,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-essiv-auto-sha1.img qiotest-145-aes-256-cbc-essiv-auto-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-essiv-auto-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2485,13 +2485,13 @@ sudo cryptsetup -q -v luksFormat --cipher aes-cbc-plain64:sha256 --key-size 256
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img qiotest-145-aes-256-cbc-plain64-sha256-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2521,13 +2521,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img qiotest-145-aes-256-cbc-plain64-sha256-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2545,13 +2545,13 @@ Formatting 'TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img', fmt=luks size=43
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img qiotest-145-aes-256-cbc-plain64-sha256-sha1
# Write test pattern 0xa7
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
-qemu-io -c write -P 0xa7 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
+qemu-io -c write -P 0xa7 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Write test pattern 0x13
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
-qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
+qemu-io -c write -P 0x13 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
wrote 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
@@ -2581,13 +2581,13 @@ wrote 10485760/10485760 bytes at offset 3298534883328
sudo cryptsetup -q -v luksOpen TEST_DIR/luks-aes-256-cbc-plain64-sha256-sha1.img qiotest-145-aes-256-cbc-plain64-sha256-sha1
# Read test pattern 0x91
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
-qemu-io -c read -P 0x91 100M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
+qemu-io -c read -P 0x91 100M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 104857600
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
# Read test pattern 0x5e
sudo chown UID:GID /dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
-qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=file,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
+qemu-io -c read -P 0x5e 3145728M 10M --image-opts driver=host_device,filename=/dev/mapper/qiotest-145-aes-256-cbc-plain64-sha256-sha1
read 10485760/10485760 bytes at offset 3298534883328
10 MiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
--
2.13.6
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Qemu-devel] [PULL 2/7] block: Fix typos in comments (found by codespell)
2018-07-23 16:45 [Qemu-devel] [PULL 0/7] Block layer patches Kevin Wolf
2018-07-23 16:45 ` [Qemu-devel] [PULL 1/7] qemu-iotests: Use host_device instead of file in 149 Kevin Wolf
@ 2018-07-23 16:45 ` Kevin Wolf
2018-07-23 16:45 ` [Qemu-devel] [PULL 3/7] qemu-img: avoid overflow of min_sparse parameter Kevin Wolf
` (5 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Kevin Wolf @ 2018-07-23 16:45 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel, peter.maydell
From: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block.c | 2 +-
block/backup.c | 4 ++--
block/curl.c | 2 +-
block/gluster.c | 2 +-
block/vhdx.c | 2 +-
5 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/block.c b/block.c
index a2fe05ea96..39f373e035 100644
--- a/block.c
+++ b/block.c
@@ -3002,7 +3002,7 @@ BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
*
* Reopens all BDS specified in the queue, with the appropriate
* flags. All devices are prepared for reopen, and failure of any
- * device will cause all device changes to be abandonded, and intermediate
+ * device will cause all device changes to be abandoned, and intermediate
* data cleaned up.
*
* If all devices prepare successfully, then the changes are committed
diff --git a/block/backup.c b/block/backup.c
index 319fc922e8..8630d32926 100644
--- a/block/backup.c
+++ b/block/backup.c
@@ -91,7 +91,7 @@ static void cow_request_end(CowRequest *req)
}
/* Copy range to target with a bounce buffer and return the bytes copied. If
- * error occured, return a negative error number */
+ * error occurred, return a negative error number */
static int coroutine_fn backup_cow_with_bounce_buffer(BackupBlockJob *job,
int64_t start,
int64_t end,
@@ -148,7 +148,7 @@ fail:
}
-/* Copy range to target and return the bytes copied. If error occured, return a
+/* Copy range to target and return the bytes copied. If error occurred, return a
* negative error number. */
static int coroutine_fn backup_cow_with_offload(BackupBlockJob *job,
int64_t start,
diff --git a/block/curl.c b/block/curl.c
index aa42535783..229bb84a27 100644
--- a/block/curl.c
+++ b/block/curl.c
@@ -804,7 +804,7 @@ static int curl_open(BlockDriverState *bs, QDict *options, int flags,
}
/* Prior CURL 7.19.4 return value of 0 could mean that the file size is not
* know or the size is zero. From 7.19.4 CURL returns -1 if size is not
- * known and zero if it is realy zero-length file. */
+ * known and zero if it is really zero-length file. */
#if LIBCURL_VERSION_NUM >= 0x071304
if (d < 0) {
pstrcpy(state->errmsg, CURL_ERROR_SIZE,
diff --git a/block/gluster.c b/block/gluster.c
index a4e1c8ecd8..4fd55a9cc5 100644
--- a/block/gluster.c
+++ b/block/gluster.c
@@ -1326,7 +1326,7 @@ static int qemu_gluster_has_zero_init(BlockDriverState *bs)
* If @start is in a trailing hole or beyond EOF, return -ENXIO.
* If we can't find out, return a negative errno other than -ENXIO.
*
- * (Shamefully copied from file-posix.c, only miniscule adaptions.)
+ * (Shamefully copied from file-posix.c, only minuscule adaptions.)
*/
static int find_allocation(BlockDriverState *bs, off_t start,
off_t *data, off_t *hole)
diff --git a/block/vhdx.c b/block/vhdx.c
index 4d0819750f..0795ca1985 100644
--- a/block/vhdx.c
+++ b/block/vhdx.c
@@ -185,7 +185,7 @@ uint32_t vhdx_checksum_calc(uint32_t crc, uint8_t *buf, size_t size,
/* Validates the checksum of the buffer, with an in-place CRC.
*
* Zero is substituted during crc calculation for the original crc field,
- * and the crc field is restored afterwards. But the buffer will be modifed
+ * and the crc field is restored afterwards. But the buffer will be modified
* during the calculation, so this may not be not suitable for multi-threaded
* use.
*
--
2.13.6
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Qemu-devel] [PULL 3/7] qemu-img: avoid overflow of min_sparse parameter
2018-07-23 16:45 [Qemu-devel] [PULL 0/7] Block layer patches Kevin Wolf
2018-07-23 16:45 ` [Qemu-devel] [PULL 1/7] qemu-iotests: Use host_device instead of file in 149 Kevin Wolf
2018-07-23 16:45 ` [Qemu-devel] [PULL 2/7] block: Fix typos in comments (found by codespell) Kevin Wolf
@ 2018-07-23 16:45 ` Kevin Wolf
2018-07-23 16:45 ` [Qemu-devel] [PULL 4/7] iotests: remove LUKS support from test 226 Kevin Wolf
` (4 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Kevin Wolf @ 2018-07-23 16:45 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel, peter.maydell
From: Peter Lieven <pl@kamp.de>
the min_sparse convert parameter can overflow (e.g. -S 1024G)
in the conversion from int64_t to int resulting in a negative
min_sparse parameter. Avoid this by limiting the valid parameters
to sane values. In fact anything exceeding the convert buffer size
is also pointless. While at it also forbid values that are non
multiple of 512 to avoid undesired behaviour. For instance, values
between 1 and 511 were legal, but resulted in full allocation.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
qemu-img.c | 16 +++++++++++-----
1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/qemu-img.c b/qemu-img.c
index 4a7ce43dc9..9b7506b8ae 100644
--- a/qemu-img.c
+++ b/qemu-img.c
@@ -2005,6 +2005,8 @@ static int convert_do_copy(ImgConvertState *s)
return s->ret;
}
+#define MAX_BUF_SECTORS 32768
+
static int img_convert(int argc, char **argv)
{
int c, bs_i, flags, src_flags = 0;
@@ -2100,8 +2102,12 @@ static int img_convert(int argc, char **argv)
int64_t sval;
sval = cvtnum(optarg);
- if (sval < 0) {
- error_report("Invalid minimum zero buffer size for sparse output specified");
+ if (sval < 0 || sval & (BDRV_SECTOR_SIZE - 1) ||
+ sval / BDRV_SECTOR_SIZE > MAX_BUF_SECTORS) {
+ error_report("Invalid buffer size for sparse output specified. "
+ "Valid sizes are multiples of %llu up to %llu. Select "
+ "0 to disable sparse detection (fully allocates output).",
+ BDRV_SECTOR_SIZE, MAX_BUF_SECTORS * BDRV_SECTOR_SIZE);
goto fail_getopt;
}
@@ -2385,9 +2391,9 @@ static int img_convert(int argc, char **argv)
}
/* increase bufsectors from the default 4096 (2M) if opt_transfer
- * or discard_alignment of the out_bs is greater. Limit to 32768 (16MB)
- * as maximum. */
- s.buf_sectors = MIN(32768,
+ * or discard_alignment of the out_bs is greater. Limit to
+ * MAX_BUF_SECTORS as maximum which is currently 32768 (16MB). */
+ s.buf_sectors = MIN(MAX_BUF_SECTORS,
MAX(s.buf_sectors,
MAX(out_bs->bl.opt_transfer >> BDRV_SECTOR_BITS,
out_bs->bl.pdiscard_alignment >>
--
2.13.6
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Qemu-devel] [PULL 4/7] iotests: remove LUKS support from test 226
2018-07-23 16:45 [Qemu-devel] [PULL 0/7] Block layer patches Kevin Wolf
` (2 preceding siblings ...)
2018-07-23 16:45 ` [Qemu-devel] [PULL 3/7] qemu-img: avoid overflow of min_sparse parameter Kevin Wolf
@ 2018-07-23 16:45 ` Kevin Wolf
2018-07-23 16:45 ` [Qemu-devel] [PULL 5/7] iotest: Fix filtering order in 226 Kevin Wolf
` (3 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Kevin Wolf @ 2018-07-23 16:45 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel, peter.maydell
From: John Snow <jsnow@redhat.com>
This test doesn't actually care about the format anyway, it just
supports "all formats" as a convenience. LUKS however does not use a
simple image filename which confuses this iotest.
We can simply skip the test for formats that use IMGOPTSSYNTAX for
their filenames without missing much coverage.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
tests/qemu-iotests/226 | 3 +++
1 file changed, 3 insertions(+)
diff --git a/tests/qemu-iotests/226 b/tests/qemu-iotests/226
index 460aea2fc9..34987d43f9 100755
--- a/tests/qemu-iotests/226
+++ b/tests/qemu-iotests/226
@@ -41,6 +41,9 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
# Generic format, but tests file-protocol specific error handling
_supported_fmt generic
+if [ "$IMGOPTSSYNTAX" = "true" ]; then
+ _unsupported_fmt $IMGFMT
+fi
_supported_proto file
_supported_os Linux
--
2.13.6
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Qemu-devel] [PULL 5/7] iotest: Fix filtering order in 226
2018-07-23 16:45 [Qemu-devel] [PULL 0/7] Block layer patches Kevin Wolf
` (3 preceding siblings ...)
2018-07-23 16:45 ` [Qemu-devel] [PULL 4/7] iotests: remove LUKS support from test 226 Kevin Wolf
@ 2018-07-23 16:45 ` Kevin Wolf
2018-07-23 16:45 ` [Qemu-devel] [PULL 6/7] iotests: Disallow compat=0.10 in 223 Kevin Wolf
` (2 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Kevin Wolf @ 2018-07-23 16:45 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel, peter.maydell
From: Max Reitz <mreitz@redhat.com>
The test directory should be filtered before the image format, otherwise
the test will fail if the image format is part of the test directory,
like so:
[...]
-can't open: Could not open 'TEST_DIR/t.IMGFMT': Is a directory
+can't open: Could not open '/tmp/test-IMGFMT/t.IMGFMT': Is a directory
[...]
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
tests/qemu-iotests/226 | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/tests/qemu-iotests/226 b/tests/qemu-iotests/226
index 34987d43f9..211ea9888a 100755
--- a/tests/qemu-iotests/226
+++ b/tests/qemu-iotests/226
@@ -55,10 +55,10 @@ for PROTO in "file" "host_device" "host_cdrom"; do
echo "=== Testing with driver:$PROTO ==="
echo
echo "== Testing RO =="
- $QEMU_IO -c "open -r -o driver=$PROTO,filename=$TEST_IMG" 2>&1 | _filter_imgfmt | _filter_testdir
+ $QEMU_IO -c "open -r -o driver=$PROTO,filename=$TEST_IMG" 2>&1 | _filter_testdir | _filter_imgfmt
$QEMU_IO -c "open -r -o driver=$PROTO,filename=/dev/null" 2>&1 | _filter_imgfmt
echo "== Testing RW =="
- $QEMU_IO -c "open -o driver=$PROTO,filename=$TEST_IMG" 2>&1 | _filter_imgfmt | _filter_testdir
+ $QEMU_IO -c "open -o driver=$PROTO,filename=$TEST_IMG" 2>&1 | _filter_testdir | _filter_imgfmt
$QEMU_IO -c "open -o driver=$PROTO,filename=/dev/null" 2>&1 | _filter_imgfmt
done
--
2.13.6
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Qemu-devel] [PULL 6/7] iotests: Disallow compat=0.10 in 223
2018-07-23 16:45 [Qemu-devel] [PULL 0/7] Block layer patches Kevin Wolf
` (4 preceding siblings ...)
2018-07-23 16:45 ` [Qemu-devel] [PULL 5/7] iotest: Fix filtering order in 226 Kevin Wolf
@ 2018-07-23 16:45 ` Kevin Wolf
2018-07-23 16:45 ` [Qemu-devel] [PULL 7/7] block/vvfat: Disable debug message by default Kevin Wolf
2018-07-23 18:23 ` [Qemu-devel] [PULL 0/7] Block layer patches Peter Maydell
7 siblings, 0 replies; 9+ messages in thread
From: Kevin Wolf @ 2018-07-23 16:45 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel, peter.maydell
From: Max Reitz <mreitz@redhat.com>
223 tests persistent dirty bitmaps which are not supported in
compat=0.10, so that option is unsupported for this test.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Tested-by: John Snow <jsnow@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
tests/qemu-iotests/223 | 2 ++
1 file changed, 2 insertions(+)
diff --git a/tests/qemu-iotests/223 b/tests/qemu-iotests/223
index b63b7a4f9e..8b1859c2dd 100755
--- a/tests/qemu-iotests/223
+++ b/tests/qemu-iotests/223
@@ -40,6 +40,8 @@ trap "_cleanup; exit \$status" 0 1 2 3 15
_supported_fmt qcow2
_supported_proto file # uses NBD as well
_supported_os Linux
+# Persistent dirty bitmaps require compat=1.1
+_unsupported_imgopts 'compat=0.10'
function do_run_qemu()
{
--
2.13.6
^ permalink raw reply related [flat|nested] 9+ messages in thread
* [Qemu-devel] [PULL 7/7] block/vvfat: Disable debug message by default
2018-07-23 16:45 [Qemu-devel] [PULL 0/7] Block layer patches Kevin Wolf
` (5 preceding siblings ...)
2018-07-23 16:45 ` [Qemu-devel] [PULL 6/7] iotests: Disallow compat=0.10 in 223 Kevin Wolf
@ 2018-07-23 16:45 ` Kevin Wolf
2018-07-23 18:23 ` [Qemu-devel] [PULL 0/7] Block layer patches Peter Maydell
7 siblings, 0 replies; 9+ messages in thread
From: Kevin Wolf @ 2018-07-23 16:45 UTC (permalink / raw)
To: qemu-block; +Cc: kwolf, qemu-devel, peter.maydell
From: Thomas Huth <thuth@redhat.com>
It's annoying to see this debug message every time you use vvfat.
Disable it with the DLOG() macro by default, as it is done with the
other debug messages in this file.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
block/vvfat.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/block/vvfat.c b/block/vvfat.c
index c7d2ed2d96..fc41841a5c 100644
--- a/block/vvfat.c
+++ b/block/vvfat.c
@@ -1245,8 +1245,8 @@ static int vvfat_open(BlockDriverState *bs, QDict *options, int flags,
s->fat2 = NULL;
s->downcase_short_names = 1;
- fprintf(stderr, "vvfat %s chs %d,%d,%d\n",
- dirname, cyls, heads, secs);
+ DLOG(fprintf(stderr, "vvfat %s chs %d,%d,%d\n",
+ dirname, cyls, heads, secs));
s->sector_count = cyls * heads * secs - s->offset_to_bootsector;
--
2.13.6
^ permalink raw reply related [flat|nested] 9+ messages in thread
* Re: [Qemu-devel] [PULL 0/7] Block layer patches
2018-07-23 16:45 [Qemu-devel] [PULL 0/7] Block layer patches Kevin Wolf
` (6 preceding siblings ...)
2018-07-23 16:45 ` [Qemu-devel] [PULL 7/7] block/vvfat: Disable debug message by default Kevin Wolf
@ 2018-07-23 18:23 ` Peter Maydell
7 siblings, 0 replies; 9+ messages in thread
From: Peter Maydell @ 2018-07-23 18:23 UTC (permalink / raw)
To: Kevin Wolf; +Cc: Qemu-block, QEMU Developers
On 23 July 2018 at 17:45, Kevin Wolf <kwolf@redhat.com> wrote:
> The following changes since commit 55b1f14cefcb19ce6d5e28c4c83404230888aa7e:
>
> Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-3.0-pull-request' into staging (2018-07-23 14:03:14 +0100)
>
> are available in the git repository at:
>
> git://repo.or.cz/qemu/kevin.git tags/for-upstream
>
> for you to fetch changes up to 3e31b4e17064d22e533071aaa57d3f01499ef910:
>
> block/vvfat: Disable debug message by default (2018-07-23 16:50:43 +0200)
>
> ----------------------------------------------------------------
> Block layer patches:
>
> - vvfat: Disable debug message by default
> - qemu-iotests fixes
> - Fix typos in comments
>
Applied, thanks.
-- PMM
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2018-07-23 18:24 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-07-23 16:45 [Qemu-devel] [PULL 0/7] Block layer patches Kevin Wolf
2018-07-23 16:45 ` [Qemu-devel] [PULL 1/7] qemu-iotests: Use host_device instead of file in 149 Kevin Wolf
2018-07-23 16:45 ` [Qemu-devel] [PULL 2/7] block: Fix typos in comments (found by codespell) Kevin Wolf
2018-07-23 16:45 ` [Qemu-devel] [PULL 3/7] qemu-img: avoid overflow of min_sparse parameter Kevin Wolf
2018-07-23 16:45 ` [Qemu-devel] [PULL 4/7] iotests: remove LUKS support from test 226 Kevin Wolf
2018-07-23 16:45 ` [Qemu-devel] [PULL 5/7] iotest: Fix filtering order in 226 Kevin Wolf
2018-07-23 16:45 ` [Qemu-devel] [PULL 6/7] iotests: Disallow compat=0.10 in 223 Kevin Wolf
2018-07-23 16:45 ` [Qemu-devel] [PULL 7/7] block/vvfat: Disable debug message by default Kevin Wolf
2018-07-23 18:23 ` [Qemu-devel] [PULL 0/7] Block layer patches Peter Maydell
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).