From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 22/45] intc/arm_gic: Implement virtualization extensions in gic_acknowledge_irq
Date: Tue, 14 Aug 2018 19:17:52 +0100 [thread overview]
Message-ID: <20180814181815.23348-23-peter.maydell@linaro.org> (raw)
In-Reply-To: <20180814181815.23348-1-peter.maydell@linaro.org>
From: Luc Michel <luc.michel@greensocs.com>
Implement virtualization extensions in the gic_acknowledge_irq()
function. This function changes the state of the highest priority IRQ
from pending to active.
When the current CPU is a vCPU, modifying the state of an IRQ modifies
the corresponding LR entry. However if we clear the pending flag before
setting the active one, we lose track of the LR entry as it becomes
invalid. The next call to gic_get_lr_entry() will fail.
To overcome this issue, we call gic_activate_irq() before
gic_clear_pending(). This does not change the general behaviour of
gic_acknowledge_irq.
We also move the SGI case in gic_clear_pending_sgi() to enhance
code readability as the virtualization extensions support adds a if-else
level.
Signed-off-by: Luc Michel <luc.michel@greensocs.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20180727095421.386-12-luc.michel@greensocs.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
hw/intc/arm_gic.c | 52 ++++++++++++++++++++++++++++++-----------------
1 file changed, 33 insertions(+), 19 deletions(-)
diff --git a/hw/intc/arm_gic.c b/hw/intc/arm_gic.c
index de73dc9f54b..d80acde989f 100644
--- a/hw/intc/arm_gic.c
+++ b/hw/intc/arm_gic.c
@@ -365,17 +365,44 @@ static void gic_drop_prio(GICState *s, int cpu, int group)
s->running_priority[cpu] = gic_get_prio_from_apr_bits(s, cpu);
}
+static inline uint32_t gic_clear_pending_sgi(GICState *s, int irq, int cpu)
+{
+ int src;
+ uint32_t ret;
+
+ if (!gic_is_vcpu(cpu)) {
+ /* Lookup the source CPU for the SGI and clear this in the
+ * sgi_pending map. Return the src and clear the overall pending
+ * state on this CPU if the SGI is not pending from any CPUs.
+ */
+ assert(s->sgi_pending[irq][cpu] != 0);
+ src = ctz32(s->sgi_pending[irq][cpu]);
+ s->sgi_pending[irq][cpu] &= ~(1 << src);
+ if (s->sgi_pending[irq][cpu] == 0) {
+ gic_clear_pending(s, irq, cpu);
+ }
+ ret = irq | ((src & 0x7) << 10);
+ } else {
+ uint32_t *lr_entry = gic_get_lr_entry(s, irq, cpu);
+ src = GICH_LR_CPUID(*lr_entry);
+
+ gic_clear_pending(s, irq, cpu);
+ ret = irq | (src << 10);
+ }
+
+ return ret;
+}
+
uint32_t gic_acknowledge_irq(GICState *s, int cpu, MemTxAttrs attrs)
{
- int ret, irq, src;
- int cm = 1 << cpu;
+ int ret, irq;
/* gic_get_current_pending_irq() will return 1022 or 1023 appropriately
* for the case where this GIC supports grouping and the pending interrupt
* is in the wrong group.
*/
irq = gic_get_current_pending_irq(s, cpu, attrs);
- trace_gic_acknowledge_irq(cpu, irq);
+ trace_gic_acknowledge_irq(gic_get_vcpu_real_id(cpu), irq);
if (irq >= GIC_MAXIRQ) {
DPRINTF("ACK, no pending interrupt or it is hidden: %d\n", irq);
@@ -387,6 +414,8 @@ uint32_t gic_acknowledge_irq(GICState *s, int cpu, MemTxAttrs attrs)
return 1023;
}
+ gic_activate_irq(s, cpu, irq);
+
if (s->revision == REV_11MPCORE) {
/* Clear pending flags for both level and edge triggered interrupts.
* Level triggered IRQs will be reasserted once they become inactive.
@@ -395,28 +424,13 @@ uint32_t gic_acknowledge_irq(GICState *s, int cpu, MemTxAttrs attrs)
ret = irq;
} else {
if (irq < GIC_NR_SGIS) {
- /* Lookup the source CPU for the SGI and clear this in the
- * sgi_pending map. Return the src and clear the overall pending
- * state on this CPU if the SGI is not pending from any CPUs.
- */
- assert(s->sgi_pending[irq][cpu] != 0);
- src = ctz32(s->sgi_pending[irq][cpu]);
- s->sgi_pending[irq][cpu] &= ~(1 << src);
- if (s->sgi_pending[irq][cpu] == 0) {
- gic_clear_pending(s, irq, cpu);
- }
- ret = irq | ((src & 0x7) << 10);
+ ret = gic_clear_pending_sgi(s, irq, cpu);
} else {
- /* Clear pending state for both level and edge triggered
- * interrupts. (level triggered interrupts with an active line
- * remain pending, see gic_test_pending)
- */
gic_clear_pending(s, irq, cpu);
ret = irq;
}
}
- gic_activate_irq(s, cpu, irq);
gic_update(s);
DPRINTF("ACK %d\n", irq);
return ret;
--
2.18.0
next prev parent reply other threads:[~2018-08-14 18:21 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-08-14 18:17 [Qemu-devel] [PULL 00/45] target-arm queue Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 01/45] target/arm: Forbid unprivileged mode for M Baseline Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 02/45] nvic: Handle ARMv6-M SCS reserved registers Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 03/45] arm: Add ARMv6-M programmer's model support Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 04/45] nvic: Change NVIC to support ARMv6-M Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 05/45] accel/tcg: Pass read access type through to io_readx() Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 06/45] accel/tcg: Handle get_page_addr_code() returning -1 in hashtable lookups Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 07/45] accel/tcg: Handle get_page_addr_code() returning -1 in tb_check_watchpoint() Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 08/45] accel/tcg: tb_gen_code(): Create single-insn TB for execution from non-RAM Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 09/45] accel/tcg: Return -1 for execution from MMIO regions in get_page_addr_code() Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 10/45] target/arm: Allow execution from small regions Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 11/45] accel/tcg: Check whether TLB entry is RAM consistently with how we set it up Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 12/45] intc/arm_gic: Refactor operations on the distributor Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 13/45] intc/arm_gic: Implement GICD_ISACTIVERn and GICD_ICACTIVERn registers Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 14/45] intc/arm_gic: Remove some dead code and put some functions static Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 15/45] vmstate.h: Provide VMSTATE_UINT16_SUB_ARRAY Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 16/45] intc/arm_gic: Add the virtualization extensions to the GIC state Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 17/45] intc/arm_gic: Add virtual interface register definitions Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 18/45] intc/arm_gic: Add virtualization extensions helper macros and functions Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 19/45] intc/arm_gic: Refactor secure/ns access check in the CPU interface Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 20/45] intc/arm_gic: Add virtualization enabled IRQ helper functions Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 21/45] intc/arm_gic: Implement virtualization extensions in gic_(activate_irq|drop_prio) Peter Maydell
2018-08-14 18:17 ` Peter Maydell [this message]
2018-08-14 18:17 ` [Qemu-devel] [PULL 23/45] intc/arm_gic: Implement virtualization extensions in gic_(deactivate|complete_irq) Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 24/45] intc/arm_gic: Implement virtualization extensions in gic_cpu_(read|write) Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 25/45] intc/arm_gic: Wire the vCPU interface Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 26/45] intc/arm_gic: Implement the virtual interface registers Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 27/45] intc/arm_gic: Implement gic_update_virt() function Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 28/45] intc/arm_gic: Implement maintenance interrupt generation Peter Maydell
2018-08-14 18:17 ` [Qemu-devel] [PULL 29/45] intc/arm_gic: Improve traces Peter Maydell
2018-08-14 18:18 ` [Qemu-devel] [PULL 30/45] xlnx-zynqmp: Improve GIC wiring and MMIO mapping Peter Maydell
2018-08-14 18:18 ` [Qemu-devel] [PULL 31/45] arm/virt: Add support for GICv2 virtualization extensions Peter Maydell
2018-08-14 18:18 ` [Qemu-devel] [PULL 32/45] arm: Fix return code of arm_load_elf Peter Maydell
2018-08-14 18:18 ` [Qemu-devel] [PULL 33/45] target/arm: Mask virtual interrupts if HCR_EL2.TGE is set Peter Maydell
2018-08-14 18:18 ` [Qemu-devel] [PULL 34/45] target/arm: Honour HCR_EL2.TGE and MDCR_EL2.TDE in debug register access checks Peter Maydell
2018-08-14 18:18 ` [Qemu-devel] [PULL 35/45] target/arm: Honour HCR_EL2.TGE when raising synchronous exceptions Peter Maydell
2018-08-14 18:18 ` [Qemu-devel] [PULL 36/45] target/arm: Provide accessor functions for HCR_EL2.{IMO, FMO, AMO} Peter Maydell
2018-08-14 18:18 ` [Qemu-devel] [PULL 37/45] target/arm: Treat SCTLR_EL1.M as if it were zero when HCR_EL2.TGE is set Peter Maydell
2018-08-14 18:18 ` [Qemu-devel] [PULL 38/45] target/arm: Improve exception-taken logging Peter Maydell
2018-08-14 18:18 ` [Qemu-devel] [PULL 39/45] target/arm: Initialize exc_secure correctly in do_v7m_exception_exit() Peter Maydell
2018-08-14 18:18 ` [Qemu-devel] [PULL 40/45] target/arm: Restore M-profile CONTROL.SPSEL before any tailchaining Peter Maydell
2018-08-14 18:18 ` [Qemu-devel] [PULL 41/45] target/arm: Implement tailchaining for M profile cores Peter Maydell
2018-08-14 18:18 ` [Qemu-devel] [PULL 42/45] target/arm: Fix sign of sve_cmpeq_ppzw/sve_cmpne_ppzw Peter Maydell
2018-08-14 18:18 ` [Qemu-devel] [PULL 43/45] target/arm: Fix typo in do_sat_addsub_64 Peter Maydell
2018-08-14 18:18 ` [Qemu-devel] [PULL 44/45] target/arm: Reorganize SVE WHILE Peter Maydell
2018-08-14 18:18 ` [Qemu-devel] [PULL 45/45] target/arm: Fix typo in helper_sve_movz_d Peter Maydell
2018-08-15 12:29 ` [Qemu-devel] [PULL 00/45] target-arm queue Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180814181815.23348-23-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).