qemu-devel.nongnu.org archive mirror
 help / color / mirror / Atom feed
From: David Gibson <david@gibson.dropbear.id.au>
To: peter.maydell@linaro.org
Cc: groug@kaod.org, aik@ozlabs.ru, qemu-devel@nongnu.org,
	qemu-ppc@nongnu.org, clg@kaod.org, lvivier@redhat.com,
	David Gibson <david@gibson.dropbear.id.au>
Subject: [Qemu-devel] [PULL 11/26] vfio/spapr: Allow backing bigger guest IOMMU pages with smaller physical pages
Date: Tue, 21 Aug 2018 14:33:28 +1000	[thread overview]
Message-ID: <20180821043343.7514-12-david@gibson.dropbear.id.au> (raw)
In-Reply-To: <20180821043343.7514-1-david@gibson.dropbear.id.au>

From: Alexey Kardashevskiy <aik@ozlabs.ru>

At the moment the PPC64/pseries guest only supports 4K/64K/16M IOMMU
pages and POWER8 CPU supports the exact same set of page size so
so far things worked fine.

However POWER9 supports different set of sizes - 4K/64K/2M/1G and
the last two - 2M and 1G - are not even allowed in the paravirt interface
(RTAS DDW) so we always end up using 64K IOMMU pages, although we could
back guest's 16MB IOMMU pages with 2MB pages on the host.

This stores the supported host IOMMU page sizes in VFIOContainer and uses
this later when creating a new DMA window. This uses the system page size
(64k normally, 2M/16M/1G if hugepages used) as the upper limit of
the IOMMU pagesize.

This changes the type of @pagesize to uint64_t as this is what
memory_region_iommu_get_min_page_size() returns and clz64() takes.

There should be no behavioral changes on platforms other than pseries.
The guest will keep using the IOMMU page size selected by the PHB pagesize
property as this only changes the underlying hardware TCE table
granularity.

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
---
 hw/vfio/common.c              |  3 +++
 hw/vfio/spapr.c               | 21 ++++++++++++++++++++-
 include/hw/vfio/vfio-common.h |  1 +
 3 files changed, 24 insertions(+), 1 deletion(-)

diff --git a/hw/vfio/common.c b/hw/vfio/common.c
index cd1f4af18a..3f31f80b12 100644
--- a/hw/vfio/common.c
+++ b/hw/vfio/common.c
@@ -1136,6 +1136,7 @@ static int vfio_connect_container(VFIOGroup *group, AddressSpace *as,
             info.iova_pgsizes = 4096;
         }
         vfio_host_win_add(container, 0, (hwaddr)-1, info.iova_pgsizes);
+        container->pgsizes = info.iova_pgsizes;
     } else if (ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_SPAPR_TCE_IOMMU) ||
                ioctl(fd, VFIO_CHECK_EXTENSION, VFIO_SPAPR_TCE_v2_IOMMU)) {
         struct vfio_iommu_spapr_tce_info info;
@@ -1200,6 +1201,7 @@ static int vfio_connect_container(VFIOGroup *group, AddressSpace *as,
         }
 
         if (v2) {
+            container->pgsizes = info.ddw.pgsizes;
             /*
              * There is a default window in just created container.
              * To make region_add/del simpler, we better remove this
@@ -1214,6 +1216,7 @@ static int vfio_connect_container(VFIOGroup *group, AddressSpace *as,
             }
         } else {
             /* The default table uses 4K pages */
+            container->pgsizes = 0x1000;
             vfio_host_win_add(container, info.dma32_window_start,
                               info.dma32_window_start +
                               info.dma32_window_size - 1,
diff --git a/hw/vfio/spapr.c b/hw/vfio/spapr.c
index 259397c002..becf71a3fc 100644
--- a/hw/vfio/spapr.c
+++ b/hw/vfio/spapr.c
@@ -15,6 +15,7 @@
 
 #include "hw/vfio/vfio-common.h"
 #include "hw/hw.h"
+#include "exec/ram_addr.h"
 #include "qemu/error-report.h"
 #include "trace.h"
 
@@ -144,9 +145,27 @@ int vfio_spapr_create_window(VFIOContainer *container,
 {
     int ret;
     IOMMUMemoryRegion *iommu_mr = IOMMU_MEMORY_REGION(section->mr);
-    unsigned pagesize = memory_region_iommu_get_min_page_size(iommu_mr);
+    uint64_t pagesize = memory_region_iommu_get_min_page_size(iommu_mr);
     unsigned entries, pages;
     struct vfio_iommu_spapr_tce_create create = { .argsz = sizeof(create) };
+    long systempagesize = qemu_getrampagesize();
+
+    /*
+     * The host might not support the guest supported IOMMU page size,
+     * so we will use smaller physical IOMMU pages to back them.
+     */
+    if (pagesize > systempagesize) {
+        pagesize = systempagesize;
+    }
+    pagesize = 1ULL << (63 - clz64(container->pgsizes &
+                                   (pagesize | (pagesize - 1))));
+    if (!pagesize) {
+        error_report("Host doesn't support page size 0x%"PRIx64
+                     ", the supported mask is 0x%lx",
+                     memory_region_iommu_get_min_page_size(iommu_mr),
+                     container->pgsizes);
+        return -EINVAL;
+    }
 
     /*
      * FIXME: For VFIO iommu types which have KVM acceleration to
diff --git a/include/hw/vfio/vfio-common.h b/include/hw/vfio/vfio-common.h
index 15ea6c26fd..821def0565 100644
--- a/include/hw/vfio/vfio-common.h
+++ b/include/hw/vfio/vfio-common.h
@@ -73,6 +73,7 @@ typedef struct VFIOContainer {
     unsigned iommu_type;
     int error;
     bool initialized;
+    unsigned long pgsizes;
     /*
      * This assumes the host IOMMU can support only a single
      * contiguous IOVA window.  We may need to generalize that in
-- 
2.17.1

  parent reply	other threads:[~2018-08-21  4:34 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-21  4:33 [Qemu-devel] [PULL 00/26] ppc-for-3.1 queue 20180821 David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 01/26] spapr_cpu_core: vmstate_[un]register per-CPU data from (un)realizefn David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 02/26] pseries: Update SLOF firmware image David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 03/26] target/ppc: Enable fp exceptions for user-only David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 04/26] target/ppc: Honor fpscr_ze semantics and tidy fdiv David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 05/26] target/ppc: Tidy helper_fmul David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 06/26] target/ppc: Tidy helper_fadd, helper_fsub David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 07/26] target/ppc: Tidy helper_fsqrt David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 08/26] target/ppc: Honor fpscr_ze semantics and tidy fre, fresqrt David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 09/26] target/ppc: Use non-arithmetic conversions for fp load/store David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 10/26] target/ppc: bcdsub fix sign when result is zero David Gibson
2018-08-21  4:33 ` David Gibson [this message]
2020-03-23 10:55   ` [PULL 11/26] vfio/spapr: Allow backing bigger guest IOMMU pages with smaller physical pages Peter Maydell
2020-03-24  4:08     ` Alexey Kardashevskiy
2020-03-24  4:24       ` David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 12/26] xics: don't include "target/ppc/cpu-qom.h" in "hw/ppc/xics.h" David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 13/26] target/ppc: simplify bcdadd/sub functions David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 14/26] spapr: Add a pseries-3.1 machine type David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 15/26] spapr: introduce a fixed IRQ number space David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 16/26] hw/ppc/prep: Remove ifdeffed-out stub of XCSR code David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 17/26] hw/ppc/ppc_boards: Don't use old_mmio for ref405ep_fpga David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 18/26] hw/ppc/ppc405_uc: Convert away from old_mmio David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 19/26] spapr: introduce a IRQ controller backend to the machine David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 20/26] hw/ppc: deprecate the machine type 'prep', replaced by '40p' David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 21/26] qemu-doc: mark ppc/prep machine as deprecated David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 22/26] 40p: don't use legacy fw_cfg_init_mem() function David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 23/26] mac_oldworld: " David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 24/26] mac_newworld: " David Gibson
2018-08-21  4:33 ` [Qemu-devel] [PULL 25/26] spapr_pci: factorize the use of SPAPR_MACHINE_GET_CLASS() David Gibson
2018-08-24 15:09   ` Peter Maydell
2018-08-24 15:30     ` Cédric Le Goater
2018-08-24 15:38       ` Greg Kurz
2018-08-24 16:43         ` Cédric Le Goater
2018-08-27  6:21           ` [Qemu-devel] [Qemu-ppc] " Thomas Huth
2018-08-27  9:03             ` Greg Kurz
2018-08-27 14:28               ` Greg Kurz
2018-08-21  4:33 ` [Qemu-devel] [PULL 26/26] ppc: add DBCR based debugging David Gibson
2018-08-21 14:57 ` [Qemu-devel] [PULL 00/26] ppc-for-3.1 queue 20180821 Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180821043343.7514-12-david@gibson.dropbear.id.au \
    --to=david@gibson.dropbear.id.au \
    --cc=aik@ozlabs.ru \
    --cc=clg@kaod.org \
    --cc=groug@kaod.org \
    --cc=lvivier@redhat.com \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-ppc@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).