* [Qemu-devel] [PATCH v3] hw/ppc: on 40p machine, change default firmware to OpenBIOS
@ 2018-09-08 16:14 Hervé Poussineau
2018-09-08 16:20 ` Stefan Weil
2018-09-10 2:49 ` David Gibson
0 siblings, 2 replies; 4+ messages in thread
From: Hervé Poussineau @ 2018-09-08 16:14 UTC (permalink / raw)
To: qemu-devel
Cc: Mark Cave-Ayland, David Gibson, Alexander Graf, qemu-ppc,
Hervé Poussineau, Paolo Bonzini, Thomas Huth, Laurent Vivier
OpenBIOS gained 40p support in 5b20e4cacecb62fb2bdc6867c11d44cddd77c4ff
Use it, instead of relying on an unmaintained and very limited firmware.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
---
Changes v2->v3:
- rebased on dgibson/ppc-for-3.1
Changes v1->v2:
- rebased on master
- fixed tests
hw/ppc/prep.c | 2 +-
tests/boot-serial-test.c | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/hw/ppc/prep.c b/hw/ppc/prep.c
index 162b27a3b8..baca1d7c04 100644
--- a/hw/ppc/prep.c
+++ b/hw/ppc/prep.c
@@ -651,7 +651,7 @@ static void ibm_40p_init(MachineState *machine)
/* PCI host */
dev = qdev_create(NULL, "raven-pcihost");
if (!bios_name) {
- bios_name = BIOS_FILENAME;
+ bios_name = "openbios-ppc";
}
qdev_prop_set_string(dev, "bios-name", bios_name);
qdev_prop_set_uint32(dev, "elf-machine", PPC_ELF_MACHINE);
diff --git a/tests/boot-serial-test.c b/tests/boot-serial-test.c
index f123b15e3e..f865822e32 100644
--- a/tests/boot-serial-test.c
+++ b/tests/boot-serial-test.c
@@ -75,12 +75,12 @@ typedef struct testdef {
static testdef_t tests[] = {
{ "alpha", "clipper", "", "PCI:" },
{ "ppc", "ppce500", "", "U-Boot" },
- { "ppc", "40p", "-boot d", "Booting from device d" },
+ { "ppc", "40p", "-vga none -boot d", "Trying cd:," },
{ "ppc", "g3beige", "", "PowerPC,750" },
{ "ppc", "mac99", "", "PowerPC,G4" },
{ "ppc", "sam460ex", "-m 256", "DRAM: 256 MiB" },
{ "ppc64", "ppce500", "", "U-Boot" },
- { "ppc64", "40p", "-m 192", "Memory size: 192 MB" },
+ { "ppc64", "40p", "-m 192", "Memory: 192M" },
{ "ppc64", "mac99", "", "PowerPC,970FX" },
{ "ppc64", "pseries", "", "Open Firmware" },
{ "ppc64", "powernv", "-cpu POWER8", "OPAL" },
--
2.11.0
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [Qemu-devel] [PATCH v3] hw/ppc: on 40p machine, change default firmware to OpenBIOS
2018-09-08 16:14 [Qemu-devel] [PATCH v3] hw/ppc: on 40p machine, change default firmware to OpenBIOS Hervé Poussineau
@ 2018-09-08 16:20 ` Stefan Weil
2018-09-08 16:27 ` Hervé Poussineau
2018-09-10 2:49 ` David Gibson
1 sibling, 1 reply; 4+ messages in thread
From: Stefan Weil @ 2018-09-08 16:20 UTC (permalink / raw)
To: Hervé Poussineau, qemu-devel
Cc: Laurent Vivier, Thomas Huth, Mark Cave-Ayland, Alexander Graf,
qemu-ppc, Paolo Bonzini, David Gibson
Am 08.09.2018 um 18:14 schrieb Hervé Poussineau:
[...]
> diff --git a/tests/boot-serial-test.c b/tests/boot-serial-test.c
> index f123b15e3e..f865822e32 100644
> --- a/tests/boot-serial-test.c
> +++ b/tests/boot-serial-test.c
> @@ -75,12 +75,12 @@ typedef struct testdef {
> static testdef_t tests[] = {
> { "alpha", "clipper", "", "PCI:" },
> { "ppc", "ppce500", "", "U-Boot" },
> - { "ppc", "40p", "-boot d", "Booting from device d" },
> + { "ppc", "40p", "-vga none -boot d", "Trying cd:," },
> { "ppc", "g3beige", "", "PowerPC,750" },
> { "ppc", "mac99", "", "PowerPC,G4" },
> { "ppc", "sam460ex", "-m 256", "DRAM: 256 MiB" },
> { "ppc64", "ppce500", "", "U-Boot" },
> - { "ppc64", "40p", "-m 192", "Memory size: 192 MB" },
> + { "ppc64", "40p", "-m 192", "Memory: 192M" },
I suggest using "Memory: 192 MiB" (like in the code for sam460ex above).
Regards,
Stefan Weil
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Qemu-devel] [PATCH v3] hw/ppc: on 40p machine, change default firmware to OpenBIOS
2018-09-08 16:20 ` Stefan Weil
@ 2018-09-08 16:27 ` Hervé Poussineau
0 siblings, 0 replies; 4+ messages in thread
From: Hervé Poussineau @ 2018-09-08 16:27 UTC (permalink / raw)
To: Stefan Weil, qemu-devel
Cc: Laurent Vivier, Thomas Huth, Mark Cave-Ayland, Alexander Graf,
qemu-ppc, Paolo Bonzini, David Gibson
Le 08/09/2018 à 18:20, Stefan Weil a écrit :
> Am 08.09.2018 um 18:14 schrieb Hervé Poussineau:
> [...]
>> diff --git a/tests/boot-serial-test.c b/tests/boot-serial-test.c
>> index f123b15e3e..f865822e32 100644
>> --- a/tests/boot-serial-test.c
>> +++ b/tests/boot-serial-test.c
>> @@ -75,12 +75,12 @@ typedef struct testdef {
>> static testdef_t tests[] = {
>> { "alpha", "clipper", "", "PCI:" },
>> { "ppc", "ppce500", "", "U-Boot" },
>> - { "ppc", "40p", "-boot d", "Booting from device d" },
>> + { "ppc", "40p", "-vga none -boot d", "Trying cd:," },
>> { "ppc", "g3beige", "", "PowerPC,750" },
>> { "ppc", "mac99", "", "PowerPC,G4" },
>> { "ppc", "sam460ex", "-m 256", "DRAM: 256 MiB" },
>> { "ppc64", "ppce500", "", "U-Boot" },
>> - { "ppc64", "40p", "-m 192", "Memory size: 192 MB" },
>> + { "ppc64", "40p", "-m 192", "Memory: 192M" },
>
> I suggest using "Memory: 192 MiB" (like in the code for sam460ex above).
No, because OpenBIOS doesn't print the "iB" letters...
Hervé
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [Qemu-devel] [PATCH v3] hw/ppc: on 40p machine, change default firmware to OpenBIOS
2018-09-08 16:14 [Qemu-devel] [PATCH v3] hw/ppc: on 40p machine, change default firmware to OpenBIOS Hervé Poussineau
2018-09-08 16:20 ` Stefan Weil
@ 2018-09-10 2:49 ` David Gibson
1 sibling, 0 replies; 4+ messages in thread
From: David Gibson @ 2018-09-10 2:49 UTC (permalink / raw)
To: Hervé Poussineau
Cc: qemu-devel, Mark Cave-Ayland, Alexander Graf, qemu-ppc,
Paolo Bonzini, Thomas Huth, Laurent Vivier
[-- Attachment #1: Type: text/plain, Size: 2231 bytes --]
On Sat, Sep 08, 2018 at 06:14:21PM +0200, Hervé Poussineau wrote:
> OpenBIOS gained 40p support in 5b20e4cacecb62fb2bdc6867c11d44cddd77c4ff
> Use it, instead of relying on an unmaintained and very limited firmware.
>
> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Applied to ppc-for-3.1, thanks.
> ---
> Changes v2->v3:
> - rebased on dgibson/ppc-for-3.1
>
> Changes v1->v2:
> - rebased on master
> - fixed tests
>
> hw/ppc/prep.c | 2 +-
> tests/boot-serial-test.c | 4 ++--
> 2 files changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/hw/ppc/prep.c b/hw/ppc/prep.c
> index 162b27a3b8..baca1d7c04 100644
> --- a/hw/ppc/prep.c
> +++ b/hw/ppc/prep.c
> @@ -651,7 +651,7 @@ static void ibm_40p_init(MachineState *machine)
> /* PCI host */
> dev = qdev_create(NULL, "raven-pcihost");
> if (!bios_name) {
> - bios_name = BIOS_FILENAME;
> + bios_name = "openbios-ppc";
> }
> qdev_prop_set_string(dev, "bios-name", bios_name);
> qdev_prop_set_uint32(dev, "elf-machine", PPC_ELF_MACHINE);
> diff --git a/tests/boot-serial-test.c b/tests/boot-serial-test.c
> index f123b15e3e..f865822e32 100644
> --- a/tests/boot-serial-test.c
> +++ b/tests/boot-serial-test.c
> @@ -75,12 +75,12 @@ typedef struct testdef {
> static testdef_t tests[] = {
> { "alpha", "clipper", "", "PCI:" },
> { "ppc", "ppce500", "", "U-Boot" },
> - { "ppc", "40p", "-boot d", "Booting from device d" },
> + { "ppc", "40p", "-vga none -boot d", "Trying cd:," },
> { "ppc", "g3beige", "", "PowerPC,750" },
> { "ppc", "mac99", "", "PowerPC,G4" },
> { "ppc", "sam460ex", "-m 256", "DRAM: 256 MiB" },
> { "ppc64", "ppce500", "", "U-Boot" },
> - { "ppc64", "40p", "-m 192", "Memory size: 192 MB" },
> + { "ppc64", "40p", "-m 192", "Memory: 192M" },
> { "ppc64", "mac99", "", "PowerPC,970FX" },
> { "ppc64", "pseries", "", "Open Firmware" },
> { "ppc64", "powernv", "-cpu POWER8", "OPAL" },
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-09-10 4:30 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-09-08 16:14 [Qemu-devel] [PATCH v3] hw/ppc: on 40p machine, change default firmware to OpenBIOS Hervé Poussineau
2018-09-08 16:20 ` Stefan Weil
2018-09-08 16:27 ` Hervé Poussineau
2018-09-10 2:49 ` David Gibson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).