From: "Daniel P. Berrangé" <berrange@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Daniel P. Berrangé" <berrange@redhat.com>,
"Alberto Garcia" <berto@igalia.com>
Subject: [Qemu-devel] [PATCH 3/6] crypto: introduce a xts_uint128 data type
Date: Tue, 9 Oct 2018 13:55:38 +0100 [thread overview]
Message-ID: <20181009125541.24455-4-berrange@redhat.com> (raw)
In-Reply-To: <20181009125541.24455-1-berrange@redhat.com>
The new type is designed to allow use of 64-bit arithmetic instead
of operating 1-byte at a time. The following patches will use this to
improve performance.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
---
crypto/xts.c | 45 +++++++++++++++++++++++++--------------------
1 file changed, 25 insertions(+), 20 deletions(-)
diff --git a/crypto/xts.c b/crypto/xts.c
index 3c1a92f01d..ded4365191 100644
--- a/crypto/xts.c
+++ b/crypto/xts.c
@@ -26,6 +26,11 @@
#include "qemu/osdep.h"
#include "crypto/xts.h"
+typedef struct {
+ uint64_t a;
+ uint64_t b;
+} xts_uint128;
+
static void xts_mult_x(uint8_t *I)
{
int x;
@@ -85,7 +90,7 @@ void xts_decrypt(const void *datactx,
uint8_t *dst,
const uint8_t *src)
{
- uint8_t PP[XTS_BLOCK_SIZE], CC[XTS_BLOCK_SIZE], T[XTS_BLOCK_SIZE];
+ xts_uint128 PP, CC, T;
unsigned long i, m, mo, lim;
/* get number of blocks */
@@ -102,10 +107,10 @@ void xts_decrypt(const void *datactx,
}
/* encrypt the iv */
- encfunc(tweakctx, XTS_BLOCK_SIZE, T, iv);
+ encfunc(tweakctx, XTS_BLOCK_SIZE, (uint8_t *)&T, iv);
for (i = 0; i < lim; i++) {
- xts_tweak_encdec(datactx, decfunc, src, dst, T);
+ xts_tweak_encdec(datactx, decfunc, src, dst, (uint8_t *)&T);
src += XTS_BLOCK_SIZE;
dst += XTS_BLOCK_SIZE;
@@ -113,27 +118,27 @@ void xts_decrypt(const void *datactx,
/* if length is not a multiple of XTS_BLOCK_SIZE then */
if (mo > 0) {
- memcpy(CC, T, XTS_BLOCK_SIZE);
- xts_mult_x(CC);
+ memcpy(&CC, &T, XTS_BLOCK_SIZE);
+ xts_mult_x((uint8_t *)&CC);
/* PP = tweak decrypt block m-1 */
- xts_tweak_encdec(datactx, decfunc, src, PP, CC);
+ xts_tweak_encdec(datactx, decfunc, src, (uint8_t *)&PP, (uint8_t *)&CC);
/* Pm = first length % XTS_BLOCK_SIZE bytes of PP */
for (i = 0; i < mo; i++) {
- CC[i] = src[XTS_BLOCK_SIZE + i];
- dst[XTS_BLOCK_SIZE + i] = PP[i];
+ ((uint8_t *)&CC)[i] = src[XTS_BLOCK_SIZE + i];
+ dst[XTS_BLOCK_SIZE + i] = ((uint8_t *)&PP)[i];
}
for (; i < XTS_BLOCK_SIZE; i++) {
- CC[i] = PP[i];
+ ((uint8_t *)&CC)[i] = ((uint8_t *)&PP)[i];
}
/* Pm-1 = Tweak uncrypt CC */
- xts_tweak_encdec(datactx, decfunc, CC, dst, T);
+ xts_tweak_encdec(datactx, decfunc, (uint8_t *)&CC, dst, (uint8_t *)&T);
}
/* Decrypt the iv back */
- decfunc(tweakctx, XTS_BLOCK_SIZE, iv, T);
+ decfunc(tweakctx, XTS_BLOCK_SIZE, iv, (uint8_t *)&T);
}
@@ -146,7 +151,7 @@ void xts_encrypt(const void *datactx,
uint8_t *dst,
const uint8_t *src)
{
- uint8_t PP[XTS_BLOCK_SIZE], CC[XTS_BLOCK_SIZE], T[XTS_BLOCK_SIZE];
+ xts_uint128 PP, CC, T;
unsigned long i, m, mo, lim;
/* get number of blocks */
@@ -163,10 +168,10 @@ void xts_encrypt(const void *datactx,
}
/* encrypt the iv */
- encfunc(tweakctx, XTS_BLOCK_SIZE, T, iv);
+ encfunc(tweakctx, XTS_BLOCK_SIZE, (uint8_t *)&T, iv);
for (i = 0; i < lim; i++) {
- xts_tweak_encdec(datactx, encfunc, src, dst, T);
+ xts_tweak_encdec(datactx, encfunc, src, dst, (uint8_t *)&T);
dst += XTS_BLOCK_SIZE;
src += XTS_BLOCK_SIZE;
@@ -175,22 +180,22 @@ void xts_encrypt(const void *datactx,
/* if length is not a multiple of XTS_BLOCK_SIZE then */
if (mo > 0) {
/* CC = tweak encrypt block m-1 */
- xts_tweak_encdec(datactx, encfunc, src, CC, T);
+ xts_tweak_encdec(datactx, encfunc, src, (uint8_t *)&CC, (uint8_t *)&T);
/* Cm = first length % XTS_BLOCK_SIZE bytes of CC */
for (i = 0; i < mo; i++) {
- PP[i] = src[XTS_BLOCK_SIZE + i];
- dst[XTS_BLOCK_SIZE + i] = CC[i];
+ ((uint8_t *)&PP)[i] = src[XTS_BLOCK_SIZE + i];
+ dst[XTS_BLOCK_SIZE + i] = ((uint8_t *)&CC)[i];
}
for (; i < XTS_BLOCK_SIZE; i++) {
- PP[i] = CC[i];
+ ((uint8_t *)&PP)[i] = ((uint8_t *)&CC)[i];
}
/* Cm-1 = Tweak encrypt PP */
- xts_tweak_encdec(datactx, encfunc, PP, dst, T);
+ xts_tweak_encdec(datactx, encfunc, (uint8_t *)&PP, dst, (uint8_t *)&T);
}
/* Decrypt the iv back */
- decfunc(tweakctx, XTS_BLOCK_SIZE, iv, T);
+ decfunc(tweakctx, XTS_BLOCK_SIZE, iv, (uint8_t *)&T);
}
--
2.17.1
next prev parent reply other threads:[~2018-10-09 12:56 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-09 12:55 [Qemu-devel] [PATCH 0/6] crypto: improve performance of XTS cipher mode Daniel P. Berrangé
2018-10-09 12:55 ` [Qemu-devel] [PATCH 1/6] crypto: expand algorithm coverage for cipher benchmark Daniel P. Berrangé
2018-10-09 14:04 ` Marc-André Lureau
2018-10-10 11:45 ` Alberto Garcia
2018-10-09 12:55 ` [Qemu-devel] [PATCH 2/6] crypto: remove code duplication in tweak encrypt/decrypt Daniel P. Berrangé
2018-10-09 13:43 ` Alberto Garcia
2018-10-09 13:51 ` Marc-André Lureau
2018-10-09 12:55 ` Daniel P. Berrangé [this message]
2018-10-09 14:40 ` [Qemu-devel] [PATCH 3/6] crypto: introduce a xts_uint128 data type Alberto Garcia
2018-10-09 14:50 ` Alberto Garcia
2018-10-09 14:58 ` Daniel P. Berrangé
2018-10-09 15:14 ` Alberto Garcia
2018-10-09 12:55 ` [Qemu-devel] [PATCH 4/6] crypto: convert xts_tweak_encdec to use xts_uint128 type Daniel P. Berrangé
2018-10-09 15:02 ` Alberto Garcia
2018-10-09 15:06 ` Daniel P. Berrangé
2018-10-09 15:30 ` Alberto Garcia
2018-10-09 15:31 ` Daniel P. Berrangé
2018-10-11 12:16 ` Alberto Garcia
2018-10-09 12:55 ` [Qemu-devel] [PATCH 5/6] crypto: convert xts_mult_x " Daniel P. Berrangé
2018-10-09 13:52 ` Alberto Garcia
2018-10-09 13:55 ` Daniel P. Berrangé
2018-10-09 14:25 ` Alberto Garcia
2018-10-09 12:55 ` [Qemu-devel] [PATCH 6/6] crypto: annotate xts_tweak_encdec as inlineable Daniel P. Berrangé
2018-10-09 15:37 ` Alberto Garcia
2018-10-09 13:59 ` [Qemu-devel] [PATCH 0/6] crypto: improve performance of XTS cipher mode Marc-André Lureau
2018-10-09 14:13 ` Daniel P. Berrangé
2018-10-09 14:27 ` Marc-André Lureau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181009125541.24455-4-berrange@redhat.com \
--to=berrange@redhat.com \
--cc=berto@igalia.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).