From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 14/45] target/arm: Implement HCR.DC
Date: Fri, 19 Oct 2018 17:57:04 +0100 [thread overview]
Message-ID: <20181019165735.22511-15-peter.maydell@linaro.org> (raw)
In-Reply-To: <20181019165735.22511-1-peter.maydell@linaro.org>
The HCR.DC virtualization configuration register bit has the
following effects:
* SCTLR.M behaves as if it is 0 for all purposes except
direct reads of the bit
* HCR.VM behaves as if it is 1 for all purposes except
direct reads of the bit
* the memory type produced by the first stage of the EL1&EL0
translation regime is Normal Non-Shareable,
Inner Write-Back Read-Allocate Write-Allocate,
Outer Write-Back Read-Allocate Write-Allocate.
Implement this behaviour.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20181012144235.19646-5-peter.maydell@linaro.org
---
target/arm/helper.c | 23 +++++++++++++++++++++--
1 file changed, 21 insertions(+), 2 deletions(-)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index 849e505f265..24c976752c4 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -2303,13 +2303,15 @@ static uint64_t do_ats_write(CPUARMState *env, uint64_t value,
* * The Non-secure TTBCR.EAE bit is set to 1
* * The implementation includes EL2, and the value of HCR.VM is 1
*
+ * (Note that HCR.DC makes HCR.VM behave as if it is 1.)
+ *
* ATS1Hx always uses the 64bit format (not supported yet).
*/
format64 = arm_s1_regime_using_lpae_format(env, mmu_idx);
if (arm_feature(env, ARM_FEATURE_EL2)) {
if (mmu_idx == ARMMMUIdx_S12NSE0 || mmu_idx == ARMMMUIdx_S12NSE1) {
- format64 |= env->cp15.hcr_el2 & HCR_VM;
+ format64 |= env->cp15.hcr_el2 & (HCR_VM | HCR_DC);
} else {
format64 |= arm_current_el(env) == 2;
}
@@ -8718,7 +8720,8 @@ static inline bool regime_translation_disabled(CPUARMState *env,
}
if (mmu_idx == ARMMMUIdx_S2NS) {
- return (env->cp15.hcr_el2 & HCR_VM) == 0;
+ /* HCR.DC means HCR.VM behaves as 1 */
+ return (env->cp15.hcr_el2 & (HCR_DC | HCR_VM)) == 0;
}
if (env->cp15.hcr_el2 & HCR_TGE) {
@@ -8728,6 +8731,12 @@ static inline bool regime_translation_disabled(CPUARMState *env,
}
}
+ if ((env->cp15.hcr_el2 & HCR_DC) &&
+ (mmu_idx == ARMMMUIdx_S1NSE0 || mmu_idx == ARMMMUIdx_S1NSE1)) {
+ /* HCR.DC means SCTLR_EL1.M behaves as 0 */
+ return true;
+ }
+
return (regime_sctlr(env, mmu_idx) & SCTLR_M) == 0;
}
@@ -10708,6 +10717,16 @@ static bool get_phys_addr(CPUARMState *env, target_ulong address,
/* Combine the S1 and S2 cache attributes, if needed */
if (!ret && cacheattrs != NULL) {
+ if (env->cp15.hcr_el2 & HCR_DC) {
+ /*
+ * HCR.DC forces the first stage attributes to
+ * Normal Non-Shareable,
+ * Inner Write-Back Read-Allocate Write-Allocate,
+ * Outer Write-Back Read-Allocate Write-Allocate.
+ */
+ cacheattrs->attrs = 0xff;
+ cacheattrs->shareability = 0;
+ }
*cacheattrs = combine_cacheattrs(*cacheattrs, cacheattrs2);
}
--
2.19.1
next prev parent reply other threads:[~2018-10-19 17:00 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-19 16:56 [Qemu-devel] [PULL 00/45] target-arm queue Peter Maydell
2018-10-19 16:56 ` [Qemu-devel] [PULL 01/45] ssi-sd: Make devices picking up backends unavailable with -device Peter Maydell
2018-10-19 16:56 ` [Qemu-devel] [PULL 02/45] target/arm: Add support for VCPU event states Peter Maydell
2018-10-19 16:56 ` [Qemu-devel] [PULL 03/45] target/arm: Move some system registers into a substructure Peter Maydell
2018-10-19 16:56 ` [Qemu-devel] [PULL 04/45] target/arm: V8M should not imply V7VE Peter Maydell
2018-10-19 16:56 ` [Qemu-devel] [PULL 05/45] target/arm: Convert v8 extensions from feature bits to isar tests Peter Maydell
2018-10-19 16:56 ` [Qemu-devel] [PULL 06/45] target/arm: Convert division from feature bits to isar0 tests Peter Maydell
2018-10-19 16:56 ` [Qemu-devel] [PULL 07/45] target/arm: Convert jazelle from feature bit to isar1 test Peter Maydell
2018-10-19 16:56 ` [Qemu-devel] [PULL 08/45] target/arm: Convert t32ee from feature bit to isar3 test Peter Maydell
2018-10-19 16:56 ` [Qemu-devel] [PULL 09/45] target/arm: Convert sve from feature bit to aa64pfr0 test Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 10/45] target/arm: Convert v8.2-fp16 " Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 11/45] target/arm: Improve debug logging of AArch32 exception return Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 12/45] target/arm: Make switch_mode() file-local Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 13/45] target/arm: Implement HCR.FB Peter Maydell
2018-10-19 16:57 ` Peter Maydell [this message]
2018-10-19 16:57 ` [Qemu-devel] [PULL 15/45] target/arm: ISR_EL1 bits track virtual interrupts if IMO/FMO set Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 16/45] target/arm: Implement HCR.VI and VF Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 17/45] target/arm: Implement HCR.PTW Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 18/45] target/arm: New utility function to extract EC from syndrome Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 19/45] target/arm: Get IL bit correct for v7 syndrome values Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 20/45] target/arm: Report correct syndrome for FP/SIMD traps to Hyp mode Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 21/45] hw/arm/boot: Increase compliance with kernel arm64 boot protocol Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 22/45] target/arm: Hoist address increment for vector memory ops Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 23/45] target/arm: Don't call tcg_clear_temp_count Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 24/45] target/arm: Use tcg_gen_gvec_dup_i64 for LD[1-4]R Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 25/45] target/arm: Promote consecutive memory ops for aa64 Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 26/45] target/arm: Mark some arrays const Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 27/45] target/arm: Use gvec for NEON VDUP Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 28/45] target/arm: Use gvec for NEON VMOV, VMVN, VBIC & VORR (immediate) Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 29/45] target/arm: Use gvec for NEON_3R_LOGIC insns Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 30/45] target/arm: Use gvec for NEON_3R_VADD_VSUB insns Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 31/45] target/arm: Use gvec for NEON_2RM_VMN, NEON_2RM_VNEG Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 32/45] target/arm: Use gvec for NEON_3R_VMUL Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 33/45] target/arm: Use gvec for VSHR, VSHL Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 34/45] target/arm: Use gvec for VSRA Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 35/45] target/arm: Use gvec for VSRI, VSLI Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 36/45] target/arm: Use gvec for NEON_3R_VML Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 37/45] target/arm: Use gvec for NEON_3R_VTST_VCEQ, NEON_3R_VCGT, NEON_3R_VCGE Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 38/45] target/arm: Use gvec for NEON VLD all lanes Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 39/45] target/arm: Reorg NEON VLD/VST all elements Peter Maydell
2018-11-02 16:31 ` Laurent Vivier
2018-10-19 16:57 ` [Qemu-devel] [PULL 40/45] target/arm: Promote consecutive memory ops for aa32 Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 41/45] target/arm: Reorg NEON VLD/VST single element to one lane Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 42/45] net: cadence_gem: Announce availability of priority queues Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 43/45] net: cadence_gem: Announce 64bit addressing support Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 44/45] target/arm: Remove writefn from TTBR0_EL3 Peter Maydell
2018-10-19 16:57 ` [Qemu-devel] [PULL 45/45] target/arm: Only flush tlb if ASID changes Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181019165735.22511-15-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).