From: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
To: mjc@sifive.com, sagark@eecs.berkeley.edu, palmer@sifive.com,
kbastian@mail.uni-paderborn.de, Alistair.Francis@wdc.com
Cc: richard.henderson@linaro.org, peer.adelt@hni.uni-paderborn.de,
qemu-devel@nongnu.org, qemu-riscv@nongnu.org
Subject: [Qemu-devel] [PATCH v3 22/35] target/riscv: Remove manual decoding from gen_load()
Date: Wed, 31 Oct 2018 14:20:16 +0100 [thread overview]
Message-ID: <20181031132029.4887-23-kbastian@mail.uni-paderborn.de> (raw)
In-Reply-To: <20181031132029.4887-1-kbastian@mail.uni-paderborn.de>
With decodetree we don't need to convert RISC-V opcodes into to MemOps
as the old gen_load() did.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de><Paste>
---
v2 -> v3:
- Since trans_c_flw_ld and trans_c_fsw_sd still rely on the old decoder
we need to keep gen_load(). Thus we renamed it to gen_load_c.
target/riscv/insn_trans/trans_rvi.inc.c | 35 +++++++++++++++----------
target/riscv/translate.c | 6 +++--
2 files changed, 25 insertions(+), 16 deletions(-)
diff --git a/target/riscv/insn_trans/trans_rvi.inc.c b/target/riscv/insn_trans/trans_rvi.inc.c
index 4f63b904a3..2816c77375 100644
--- a/target/riscv/insn_trans/trans_rvi.inc.c
+++ b/target/riscv/insn_trans/trans_rvi.inc.c
@@ -129,34 +129,43 @@ static bool trans_bgeu(DisasContext *ctx, arg_bgeu *a)
return gen_branch(ctx, a, TCG_COND_GEU);
}
-static bool trans_lb(DisasContext *ctx, arg_lb *a)
+static bool gen_load(DisasContext *ctx, arg_lb *a, int memop)
{
- gen_load(ctx, OPC_RISC_LB, a->rd, a->rs1, a->imm);
+ TCGv t0 = tcg_temp_new();
+ TCGv t1 = tcg_temp_new();
+ gen_get_gpr(t0, a->rs1);
+ tcg_gen_addi_tl(t0, t0, a->imm);
+
+ tcg_gen_qemu_ld_tl(t1, t0, ctx->mem_idx, memop);
+ gen_set_gpr(a->rd, t1);
+ tcg_temp_free(t0);
+ tcg_temp_free(t1);
return true;
}
+static bool trans_lb(DisasContext *ctx, arg_lb *a)
+{
+ return gen_load(ctx, a, MO_SB);
+}
+
static bool trans_lh(DisasContext *ctx, arg_lh *a)
{
- gen_load(ctx, OPC_RISC_LH, a->rd, a->rs1, a->imm);
- return true;
+ return gen_load(ctx, a, MO_TESW);
}
static bool trans_lw(DisasContext *ctx, arg_lw *a)
{
- gen_load(ctx, OPC_RISC_LW, a->rd, a->rs1, a->imm);
- return true;
+ return gen_load(ctx, a, MO_TESL);
}
static bool trans_lbu(DisasContext *ctx, arg_lbu *a)
{
- gen_load(ctx, OPC_RISC_LBU, a->rd, a->rs1, a->imm);
- return true;
+ return gen_load(ctx, a, MO_UB);
}
static bool trans_lhu(DisasContext *ctx, arg_lhu *a)
{
- gen_load(ctx, OPC_RISC_LHU, a->rd, a->rs1, a->imm);
- return true;
+ return gen_load(ctx, a, MO_TEUW);
}
static bool trans_sb(DisasContext *ctx, arg_sb *a)
@@ -180,14 +189,12 @@ static bool trans_sw(DisasContext *ctx, arg_sw *a)
#ifdef TARGET_RISCV64
static bool trans_lwu(DisasContext *ctx, arg_lwu *a)
{
- gen_load(ctx, OPC_RISC_LWU, a->rd, a->rs1, a->imm);
- return true;
+ return gen_load(ctx, a, MO_TEUL);
}
static bool trans_ld(DisasContext *ctx, arg_ld *a)
{
- gen_load(ctx, OPC_RISC_LD, a->rd, a->rs1, a->imm);
- return true;
+ return gen_load(ctx, a, MO_TEQ);
}
static bool trans_sd(DisasContext *ctx, arg_sd *a)
diff --git a/target/riscv/translate.c b/target/riscv/translate.c
index 585378d1e1..605742989d 100644
--- a/target/riscv/translate.c
+++ b/target/riscv/translate.c
@@ -489,7 +489,8 @@ static void gen_jal(CPURISCVState *env, DisasContext *ctx, int rd,
ctx->base.is_jmp = DISAS_NORETURN;
}
-static void gen_load(DisasContext *ctx, uint32_t opc, int rd, int rs1,
+#ifdef TARGET_RISCV64
+static void gen_load_c(DisasContext *ctx, uint32_t opc, int rd, int rs1,
target_long imm)
{
TCGv t0 = tcg_temp_new();
@@ -508,6 +509,7 @@ static void gen_load(DisasContext *ctx, uint32_t opc, int rd, int rs1,
tcg_temp_free(t0);
tcg_temp_free(t1);
}
+#endif
static void gen_store(DisasContext *ctx, uint32_t opc, int rs1, int rs2,
target_long imm)
@@ -641,7 +643,7 @@ static void decode_RV32_64C0(DisasContext *ctx)
case 3:
#if defined(TARGET_RISCV64)
/* C.LD(RV64/128) -> ld rd', offset[7:3](rs1')*/
- gen_load(ctx, OPC_RISC_LD, rd_rs2, rs1s,
+ gen_load_c(ctx, OPC_RISC_LD, rd_rs2, rs1s,
GET_C_LD_IMM(ctx->opcode));
#else
/* C.FLW (RV32) -> flw rd', offset[6:2](rs1')*/
--
2.19.1
next prev parent reply other threads:[~2018-10-31 13:22 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-10-31 13:19 [Qemu-devel] [PATCH v3 00/35] target/riscv: Convert to decodetree Bastian Koppelmann
2018-10-31 13:19 ` [Qemu-devel] [PATCH v3 01/35] target/riscv: Move CPURISCVState pointer to DisasContext Bastian Koppelmann
2018-10-31 17:07 ` Richard Henderson
2018-10-31 20:14 ` Alistair Francis
2018-10-31 13:19 ` [Qemu-devel] [PATCH v3 02/35] target/riscv: Activate decodetree and implemnt LUI & AUIPC Bastian Koppelmann
2018-10-31 20:20 ` Alistair
2018-10-31 13:19 ` [Qemu-devel] [PATCH v3 03/35] target/riscv: Convert RVXI branch insns to decodetree Bastian Koppelmann
2018-10-31 17:11 ` Richard Henderson
2018-10-31 13:19 ` [Qemu-devel] [PATCH v3 04/35] target/riscv: Convert RV32I load/store " Bastian Koppelmann
2018-10-31 13:19 ` [Qemu-devel] [PATCH v3 05/35] target/riscv: Convert RV64I " Bastian Koppelmann
2018-10-31 17:14 ` Richard Henderson
2018-10-31 20:26 ` Alistair
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 06/35] target/riscv: Convert RVXI arithmetic " Bastian Koppelmann
2018-10-31 17:15 ` Richard Henderson
2018-10-31 20:29 ` Alistair
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 07/35] target/riscv: Convert RVXI fence " Bastian Koppelmann
2018-10-31 20:30 ` Alistair
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 08/35] target/riscv: Convert RVXI csr " Bastian Koppelmann
2018-10-31 20:46 ` Alistair
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 09/35] target/riscv: Convert RVXM " Bastian Koppelmann
2018-10-31 20:38 ` Alistair
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 10/35] target/riscv: Convert RV32A " Bastian Koppelmann
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 11/35] target/riscv: Convert RV64A " Bastian Koppelmann
2018-10-31 20:49 ` Alistair
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 12/35] target/riscv: Convert RV32F " Bastian Koppelmann
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 13/35] target/riscv: Convert RV64F " Bastian Koppelmann
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 14/35] target/riscv: Convert RV32D " Bastian Koppelmann
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 15/35] target/riscv: Convert RV64D " Bastian Koppelmann
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 16/35] target/riscv: Convert RV priv " Bastian Koppelmann
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 17/35] target/riscv: Convert quadrant 0 of RVXC " Bastian Koppelmann
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 18/35] target/riscv: Convert quadrant 1 " Bastian Koppelmann
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 19/35] target/riscv: Convert quadrant 2 " Bastian Koppelmann
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 20/35] target/riscv: Remove gen_jalr() Bastian Koppelmann
2018-10-31 20:50 ` Alistair
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 21/35] target/riscv: Remove manual decoding from gen_branch() Bastian Koppelmann
2018-10-31 13:20 ` Bastian Koppelmann [this message]
2018-10-31 22:09 ` [Qemu-devel] [PATCH v3 22/35] target/riscv: Remove manual decoding from gen_load() Richard Henderson
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 23/35] target/riscv: Remove manual decoding from gen_store() Bastian Koppelmann
2018-10-31 22:09 ` Richard Henderson
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 24/35] target/riscv: Move gen_arith_imm() decoding into trans_* functions Bastian Koppelmann
2018-10-31 22:18 ` Richard Henderson
2019-01-11 13:10 ` Bastian Koppelmann
2019-01-11 21:00 ` Richard Henderson
2019-01-18 12:00 ` Bastian Koppelmann
2018-10-31 22:26 ` Richard Henderson
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 25/35] target/riscv: make ADD/SUB/OR/XOR/AND insn use arg lists Bastian Koppelmann
2018-10-31 20:44 ` Alistair Francis
2018-10-31 22:27 ` Richard Henderson
2018-10-31 22:26 ` Richard Henderson
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 26/35] target/riscv: Remove shift and slt insn manual decoding Bastian Koppelmann
2018-10-31 22:38 ` Richard Henderson
2018-11-01 15:59 ` Palmer Dabbelt
2018-11-05 17:00 ` Bastian Koppelmann
2018-11-07 0:56 ` Palmer Dabbelt
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 27/35] target/riscv: Remove manual decoding of RV32/64M insn Bastian Koppelmann
2018-10-31 22:39 ` Richard Henderson
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 28/35] target/riscv: Rename trans_arith to gen_arith Bastian Koppelmann
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 29/35] target/riscv: Remove gen_system() Bastian Koppelmann
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 30/35] target/riscv: Remove decode_RV32_64G() Bastian Koppelmann
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 31/35] target/riscv: Convert @cs_2 insns to share translation functions Bastian Koppelmann
2018-10-31 22:42 ` Richard Henderson
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 32/35] target/riscv: Convert @cl_d, @cl_w, @cs_d, @cs_w insns Bastian Koppelmann
2018-10-31 22:43 ` Richard Henderson
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 33/35] target/riscv: Splice fsw_sd and flw_ld for riscv32 vs riscv64 Bastian Koppelmann
2018-10-31 22:45 ` Richard Henderson
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 34/35] target/riscv: Splice remaining compressed insn pairs " Bastian Koppelmann
2018-10-31 22:47 ` Richard Henderson
2018-10-31 13:20 ` [Qemu-devel] [PATCH v3 35/35] target/riscv: Remaining rvc insn reuse 32 bit translators Bastian Koppelmann
2018-10-31 22:49 ` Richard Henderson
2018-11-02 8:48 ` [Qemu-devel] [PATCH v3 00/35] target/riscv: Convert to decodetree no-reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20181031132029.4887-23-kbastian@mail.uni-paderborn.de \
--to=kbastian@mail.uni-paderborn.de \
--cc=Alistair.Francis@wdc.com \
--cc=mjc@sifive.com \
--cc=palmer@sifive.com \
--cc=peer.adelt@hni.uni-paderborn.de \
--cc=qemu-devel@nongnu.org \
--cc=qemu-riscv@nongnu.org \
--cc=richard.henderson@linaro.org \
--cc=sagark@eecs.berkeley.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).